Skip to content

Storage boxes for 2 to 6 Nintendo Switch cartridges

Creation quality: 4.1/5 (5 votes)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

Here's a perfect storage box for those who find the 12-slot cube too big:

You can choose to print a box of 2, 4 or 6 compartments depending on your needs. Your game cartridges slide in and out without friction or shock and are held securely. And they are all visible at a glance.

You can even pair a side from this box with a side for SD or microSD cards :

Each box is printable in 2 different versions.
"In-place": no assembly is required, the box is immediately usable.
To assemble: there is a very simple and very fast assembly. A video is available to help you:

There are also two possible decorations and a version without decorations. Of course, if you are comfortable with this technique, you can also change the filament while printing.

An adapter allows you to store 2 MicroSD cards in a game slot.

Finally, you can add bullet points to differentiate, number, and note the different locations in the box. There are 48 available, varying in sizes and shapes.

Have fun.

Do not hesitate to take a look at my other models:

IMPORTANT: The files you purchase (or download for free) are sold under Copyright (or distributed under license). This means that they cannot be sold or distributed for free. Additionally, you cannot sell prints made from these files. If you did, you would jeopardize the creation of new designs. Thank you for your understanding.

3D printing settings

All the models you downloaded are designed to be printed in 0.2mm.
One of the models in its "in-place" version will require a 45 ° reorientation to fit on the print bed (22cm x 22cm preferably).
The assembled versions allow printing on all bed sizes (10.7 cm for the largest dimension of the largest part).
Use FDM printing, not resin.

Detailed documentation is included in the download

3D printer file information

  • 3D design format: ZIP Folder details Close
    • Switch games boxes
      • STL/1x1/Pattern0/Assembly/Part1.STL
      • STL/1x1/Pattern0/Assembly/Part2.STL
      • STL/1x1/Pattern0/Assembly/Part3.STL
      • STL/1x1/Pattern0/Print-in-place/In-place holder.STL
      • STL/1x1/Pattern1/Assembly/Part1.STL
      • STL/1x1/Pattern1/Assembly/Part2.STL
      • STL/1x1/Pattern1/Assembly/Part3.STL
      • STL/1x1/Pattern1/Print-in-place/In-place holder.STL
      • STL/1x1/Pattern2/Assembly/Part1.STL
      • STL/1x1/Pattern2/Assembly/Part2.STL
      • STL/1x1/Pattern2/Assembly/Part3.STL
      • STL/1x1/Pattern2/Print-in-place/In-place holder.STL
      • STL/1x2/Pattern0/Assembly/Part1.STL
      • STL/1x2/Pattern0/Assembly/Part2.STL
      • STL/1x2/Pattern0/Assembly/Part3.STL
      • STL/1x2/Pattern0/Print-in-place/In-place holder.STL
      • STL/1x2/Pattern1/Assembly/Part1.STL
      • STL/1x2/Pattern1/Assembly/Part2.STL
      • STL/1x2/Pattern1/Assembly/Part3.STL
      • STL/1x2/Pattern1/Print-in-place/In-place holder.STL
      • STL/1x2/Pattern2/Assembly/Part1.STL
      • STL/1x2/Pattern2/Assembly/Part2.STL
      • STL/1x2/Pattern2/Assembly/Part3.STL
      • STL/1x2/Pattern2/Print-in-place/In-place holder.STL
      • STL/1x3/Pattern0/Assembly/Part1.STL
      • STL/1x3/Pattern0/Assembly/Part2.STL
      • STL/1x3/Pattern0/Assembly/Part3.STL
      • STL/1x3/Pattern0/Print-in-place/In-place holder.STL
      • STL/1x3/Pattern1/Assembly/Part1.STL
      • STL/1x3/Pattern1/Assembly/Part2.STL
      • STL/1x3/Pattern1/Assembly/Part3.STL
      • STL/1x3/Pattern1/Print-in-place/In-place holder.STL
      • STL/1x3/Pattern2/Assembly/Part1.STL
      • STL/1x3/Pattern2/Assembly/Part2.STL
      • STL/1x3/Pattern2/Assembly/Part3.STL
      • STL/1x3/Pattern2/Print-in-place/In-place holder.STL
      • STL/2x1/Pattern0/Assembly/Part1.STL
      • STL/2x1/Pattern0/Assembly/Part2.STL
      • STL/2x1/Pattern0/Assembly/Part3.STL
      • STL/2x1/Pattern0/Print-in-place/In-place holder.STL
      • STL/2x1/Pattern1/Assembly/Part1.STL
      • STL/2x1/Pattern1/Assembly/Part2.STL
      • STL/2x1/Pattern1/Assembly/Part3.STL
      • STL/2x1/Pattern1/Print-in-place/In-place holder.STL
      • STL/2x1/Pattern2/Assembly/Part1.STL
      • STL/2x1/Pattern2/Assembly/Part2.STL
      • STL/2x1/Pattern2/Assembly/Part3.STL
      • STL/2x1/Pattern2/Print-in-place/In-place holder.STL
      • STL/3x1/Pattern0/Assembly/Part1.STL
      • STL/3x1/Pattern0/Assembly/Part2.STL
      • STL/3x1/Pattern0/Assembly/Part3.STL
      • STL/3x1/Pattern0/Print-in-place/In-place holder.STL
      • STL/3x1/Pattern1/Assembly/Part1.STL
      • STL/3x1/Pattern1/Assembly/Part2.STL
      • STL/3x1/Pattern1/Assembly/Part3.STL
      • STL/3x1/Pattern1/Print-in-place/In-place holder.STL
      • STL/3x1/Pattern2/Assembly/Part1.STL
      • STL/3x1/Pattern2/Assembly/Part2.STL
      • STL/3x1/Pattern2/Assembly/Part3.STL
      • STL/3x1/Pattern2/Print-in-place/In-place holder.STL
      • STL/Bullets/Bullet 1x1 arrow.STL
      • STL/Bullets/Bullet 1x1 number 0.STL
      • STL/Bullets/Bullet 1x1 number 1.STL
      • STL/Bullets/Bullet 1x1 number 2.STL
      • STL/Bullets/Bullet 1x1 number 3.STL
      • STL/Bullets/Bullet 1x1 number 4.STL
      • STL/Bullets/Bullet 1x1 number 5.STL
      • STL/Bullets/Bullet 1x1 number 6.STL
      • STL/Bullets/Bullet 1x1 number 7.STL
      • STL/Bullets/Bullet 1x1 number 8.STL
      • STL/Bullets/Bullet 1x1 number 9.STL
      • STL/Bullets/Bullet 1x1 plain.STL
      • STL/Bullets/Bullet 1x1 star.STL
      • STL/Bullets/Bullet 2x1 number 1 + LArrow.STL
      • STL/Bullets/Bullet 2x1 number 1 + RArrow.STL
      • STL/Bullets/Bullet 2x1 number 1.STL
      • STL/Bullets/Bullet 2x1 number 2 + LArrow.STL
      • STL/Bullets/Bullet 2x1 number 2 + RArrow.STL
      • STL/Bullets/Bullet 2x1 number 2.STL
      • STL/Bullets/Bullet 2x1 number 3 + LArrow.STL
      • STL/Bullets/Bullet 2x1 number 3 + RArrow.STL
      • STL/Bullets/Bullet 2x1 number 3.STL
      • STL/Bullets/Bullet 2x1 number 4 + LArrow.STL
      • STL/Bullets/Bullet 2x1 number 4 + RArrow.STL
      • STL/Bullets/Bullet 2x1 number 4.STL
      • STL/Bullets/Bullet 2x1 number 5 + LArrow.STL
      • STL/Bullets/Bullet 2x1 number 5 + RArrow.STL
      • STL/Bullets/Bullet 2x1 number 5.STL
      • STL/Bullets/Bullet 2x1 number 6 + LArrow.STL
      • STL/Bullets/Bullet 2x1 number 6 + RArrow.STL
      • STL/Bullets/Bullet 2x1 number 6.STL
      • STL/Bullets/Bullet 2x1 number 7.STL
      • STL/Bullets/Bullet 2x1 number 8.STL
      • STL/Bullets/Bullet 2x1 number 9.STL
      • STL/Bullets/Bullet 2x1 number 10.STL
      • STL/Bullets/Bullet 2x1 number 11.STL
      • STL/Bullets/Bullet 2x1 number 12.STL
      • STL/Bullets/Bullet 2x1 plain.STL
      • STL/Bullets/Bullet 2x2 1 star.STL
      • STL/Bullets/Bullet 2x2 2 stars.STL
      • STL/Bullets/Bullet 2x2 3 stars.STL
      • STL/Bullets/Bullet 2x2 happy.STL
      • STL/Bullets/Bullet 2x2 pokerface.STL
      • STL/Bullets/Bullet 2x2 PS circle.STL
      • STL/Bullets/Bullet 2x2 PS cross.STL
      • STL/Bullets/Bullet 2x2 PS square.STL
      • STL/Bullets/Bullet 2x2 PS triangle.STL
      • STL/Bullets/Bullet 2x2 unhappy.STL
      • STL/2microSD_V2.stl
      • Instructions en.pdf
      • Instructions fr.pdf

    Learn more about the formats

  • Publication date: 2021-12-24 at 07:03





Issue with this design? Report a problem

Makes created by the community

Best sellers of the category Various

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!