22 IN 1 STORAGE CUBE FOR NINTENDO SWITCH GAME CARTRIDGES AND MICROSD CARDS

Storage box for 22 Nintendo Switch cartridges.

If the small cube for 12 cartridges was not big enough for you, here is the big brother which can hold 22 cartridges. We keep what makes the strength of the concept: You see all your cartridges at a glance. No need to take out each cartridge until you find the right one. You can insert and remove your cartridges without any effort and without any click. Your cartridges are perfectly maintained and do not risk being damaged during handling. Finally, its appearance is unique. You can display it proudly next to your console, no need to put it in a drawer.
There are two models available. A monochrome and smooth, basic one. And one with reliefs, much more attractive.

IMPORTANT: The files you buy are sold under Copyright. This means that they cannot be sold or distributed for free. Additionally, you may not sell prints made from these files. If you did, you would jeopardize the creation of new designs. Thank you for your understanding.
YOU CAN HOWEVER SELL YOUR PRINTS OF MY DESIGNS by subscribing to the "3D print seller" subscription: https://www.patreon.com/LabLabStudio
ALL MY DESIGNS ARE INCLUDED IN THIS SUBSCRIPTION

Assembly guide here: https://youtu.be/OQNBdJu2fcM

You will find all the instructions in Guide-en.pdf.

For a smaller box, it's here: https://cults3d.com/en/3d-model/game/cube-de-rangement-pour-cartouches-de-jeux-nintendo-switch

For the SD card version of the cube, it's here: https://cults3d.com/en/3d-model/gadget/cube-de-rangement-pour-cartes-sd-et-microsd

Layer height: 0.2 mm (it is certainly possible to make thinner)
Material: PLA (tested), PETG (tested), ABS (probably possible, not tested). DON'T TRY WITH RESIN, IT WON'T WORK.
Printing time: 15h - 16h00
Length: 32.2 m
Weight: 96 g

8 - First Link.stl must be printed with supports. Caution: supports only touching build plate.

For the temperatures and printing speeds, you can use the parameters that you master, depending on your printer and your filament.

This object is articulated and requires a high level of precision. Adherence to the build plate is therefore essential. The slightest deformation due to warping would compromise the correct opening and closing of the box. I advise you to use glue or lacquer to improve the adherence.