Pendant lamp, consisting of three 3D-printed parts.
The base-element which houses the fitting, is printed with PLA.
The shade is printable with PLA or PETG. The shades fits in the base-element with a bayonet mount. Included a hook to hang the lamp directly on and a hook to hang the lamp on the cord on the ceiling.
Only suitable for small fitting (E14) led-lamps, for instance a spotlight which only downlights, or a bulb for light around.
Diameter base-element approx. 59 mm. Height full lamp incl. hook approx. 212 mm.
For more information and other designs: http://www.sjaakvandervooren.nl
Base-element is printed with PLA, infill approx. 40%, layer 0.2, shell 2 perimeters, top/bottom 3-4 layers. The shade can be printed with PLA or PETG.
If you’re familiar with, for instance, Simplify3D, you can print the shade partly with PETG in vase-mode. The first process over a height of aproxx. 7 mm has to be printed normal (it contains the bayonet mount), but above 7 mm you can make a second process in vase-mode. I recommend a 0.5 (or larger) nozzle for these two processes.
Dutch 3d-designer, graphic design, art