Skip to content

Lazy Dogs

ezgif-7-a8d549307ce4.gif Download file Lazy Dogs • 3D printable template, mcgybeer
DSC01657 copia.jpg Download file Lazy Dogs • 3D printable template, mcgybeer
DSC01665 copia 3.jpg Download file Lazy Dogs • 3D printable template, mcgybeer
DSC01638 copia.jpg Download file Lazy Dogs • 3D printable template, mcgybeer
DSC01644 copia.jpg Download file Lazy Dogs • 3D printable template, mcgybeer
DSC01647 copia.jpg Download file Lazy Dogs • 3D printable template, mcgybeer
DSC01658 copia.jpg Download file Lazy Dogs • 3D printable template, mcgybeer
DSC01663 copia.jpg Download file Lazy Dogs • 3D printable template, mcgybeer
Add to
Make
?
Creation's quality: 4.0/5 (52 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 👁 96.5k views
  • 637 likes
  • 1.8k downloads

3D model description

Lazy Dogs!! Not only one, but 3 different models!

**No supports required. Just slice and print!

After printing, just move carefully all the articulations to completely free them.

Check my other articulated designs here!

*Disclaimer: Not MMU/multicolor models. Pictures shown contain hand-painted models.

3D printing settings

A good first layer is mandatory for the print to succeed. Be sure your printer is calibrated and you have good bed adhesion.

Good layer cooling is also recommended, as it prevents curling and warping on overhangs.

https://youtu.be/pubsmwoeDkM

3D printer file information

  • 3D design format: ZIP Folder details Close
    • Lazy Dogs.zip

    Learn more about the formats

  • Last update: 2020/12/14 at 09:29
  • Publication date: 2020/12/09 at 18:49

Copyright

©

Tags

Creator

mcgybeer mcgybeer
Designs 26
Downloads 59.7k
Followers 2.3k
Message
Page translated by automatic translation. See the original version.
Issue with this design? Report a problem

Collection associated with this 3D model

Find here a selection of the best 3D models of 3D printable print-in-place no support files
💯 Best STL files of print-in-place no support models to make with a 3D printer
Here is a selection of the best 3D printable STL files for 3D printer to print all kind of animals
🐴 Best 3D print files for 3D printing of animals

Makes created by the community

All

Lazy Dogs, Remrafs
Lazy Dogs, sbaylis
Lazy Dogs, Tanatos
Lazy Dogs, trishasnyder
Lazy Dogs, CaTZ
Lazy Dogs, gago196
Lazy Dogs, gago196

Other 3D models from the same designer

All

Best sellers of the category Game

Add a comment

22 comments

nicailjoy nicailjoy

i estimate you made around 251,500 from all the downloads. good for u :)

mcgybeer mcgybeer

Thanks! But I wish you were right, the actual number is much lower than that...

helloworld234 helloworld234

I think that it is more like 8290 dollars
marciofilipedneves marciofilipedneves

hi Would you be willing to do a Bull terrier one? i would love to print one!

mcgybeer mcgybeer

Hi!
I'm trying to move forward and design new stuff, hopefully to bring designs better every time. So I'm not doing new dogs soon, hope you understand it ;)
giftedpsycho giftedpsycho

Would you be willing to separate and sell them individually? I only want one of the dogs.

mcgybeer mcgybeer

No, sorry. They are sold as a bundle
RBuster RBuster

Hi. Can I use an SLA printer (resin) to print this model? Thanks

mcgybeer mcgybeer

Sure! Just be careful if you scale them down. I've managed to print them at 40%, but I don't recommend going below 50%.
Also, I've got the best results printing them directly on the base (without raft). But this can be a bit tricky to tune...
I'll love to see your prints.
Good luck!

  • 1 like
RBuster RBuster

Hi. I bought but I will need some help to print it in my resin 3D printer (Elegoo Mars 2 PRO). Now that I've seen the model from the inside, I can't imagine how to do this. I hope I can count on you. Thanks

mcgybeer mcgybeer

Hi!
I own an Elegoo Mars Pro (the old one), so yours should be even more capable than mine.

If your printer is well calibrated, just place the model flat on the base (I use Chitubox as slicer), slice and print. I recommend using the model with tabs, and thoroughly clean the base for good adhesion.

Regarding the parameters, that depends on the resin you're using.

Once you get more experience with your printer you will be amazed with the things that can be done without supports ;)

If you need further assistance you can reach me at mcgybeer@gmail.com

Good luck!

RBuster RBuster

Hey! Thanks. I will give it a try. I just received my 3d printer and I am waiting for the resin. I will be back when I have some news.

mcgybeer mcgybeer

Awesome, good luck!
BTW, you should try some non-articulated models first, that way you can check that the curing parameters are properly adjusted

RBuster RBuster

Thanks.

Ok. I will run several tests with less complex printing to test the parameters that the resin manufacturer gave me.

A question: its original size is around 14 cm? When I opened the file it occupied the entire print area of chitubox. If so, do you think I could halve this size by placing the model on the Y-axis of the print area instead of the X-axis, which is the larger area?

mcgybeer mcgybeer

Depending on the model you opened, they are from 11 to 16 cm approx. You can scale them down a bit to begin with (let's say 80%), and go smaller if the print succeeds.
In my case I went directly to 50%, but don't take me as an example hahaha. I like to stress my printers and push them to the limit, but I usually recommend going step by step, otherwise may be frustrating.

Also, I forgot to tell you: remember to properly clean the prints before curing, especially the remaining resin inside the legs articulations. If any residue is left there, it may cause the articulation to fuse together while curing.

RBuster RBuster

Ok. I will follow your orientation. Thanks for your help.

RBuster RBuster

Unfortunately, it didn't work out. What I imagined happened: all the holes closed. I think this model can be built only using filament.

RBuster RBuster

The size of each one was around 7cm. Here is a link for you to see the image: https://ibb.co/KxCn6TS

mcgybeer mcgybeer

Oh, that's weird. I've been able to print very small joints with my Elegoo Mars Pro, as you can see here: https://www.instagram.com/p/B8RwKshqzeF/
Which resin are you using? Have you done some calibration tests?

RBuster RBuster

It really was perfect. I did the initial calibration. Do I need to do other calibrations besides the initial one? What exactly did you do to print this way? These are really small pieces and I thought that was the problem. Did you use a special resin for this?

mcgybeer mcgybeer

I used the Elegoo water washable resin, nothing special.
Before getting the best results I had to print several tests to find the optimal layer exposure times, because that usually changes from one resin to another one, and also between printers.
From your pictures it seems you are over-exposing the layers, so you are loosing the fine details.
Do you have pictures of any other models?

RBuster RBuster

I am using these parameters: https://ibb.co/1sVpJyH

This is my first print (just before I printed your model): https://ibb.co/DG2TPMC

RBuster RBuster

Hi. Just checking if you have any news.

mcgybeer mcgybeer

Hi!
I'm afraid I'm not a resin expert, and all I can share are my previous experiences. I've just printed with Elegoo resins so far, and the articulations came out sharp and free. Other models have also amazing details (like this one I printed a while ago: https://www.instagram.com/p/CIJK067LAuY/). For the cleaning, I use 99% IPA and a magnetic stirrer, nothing special here neither.
So I'm not sure why your results are so different. You should get what you see in the slicer preview. If the model is correct there, it makes no sense that the final print is fused all together.
Maybe trying with a different resin makes a difference here.
sbaylis sbaylis

Loved this print. I added a photo where I tried to copy my own dog. I’ve had to make 5 more for my nieces as they loved them so much.

mcgybeer mcgybeer

Glad to hear that. Thanks a lot!
mcgybeer mcgybeer

Thanks!!
I did a prototype, but it was harder to print and it looked weird. I'll think again about it, maybe I can find an alternative way.
Thanks for the feedback ;)
marckart marckart

Printed all 3 and had 0 issues! Just a quick idea. Would it be difficult to have the weiner dogs ears flexi as well?
mcgybeer mcgybeer

Hi @FRANCKJARA
Sorry, I can't manage sales. I only post the designs. You should contact Cults3D staff, they will help you.
Regards,
franckjara franckjara

Hello, today I scheduled a payment for a stl, I verified that my bank made me the payment but on their platform I get that the code is wrong. Please help this is not a scam.
mcgybeer mcgybeer

Yes, it also works on FDM. It can be printed without supports directly on the base, but you will have to be very careful when removing. Be careful also if you downscale it too much, because that may cause the "elbow" joints to fuse together. Best results with a very opaque resin and a proper IPA cleaning before curing.
andy_8steel andy_8steel

Does this work for SLS printing too? Most of the examples seem to be FDM?
mcgybeer mcgybeer

Just default PrusaSlicer settings. I guess it's the setting "ensure wall thickness" (or something like that) the one that made a good top finish. For other slicers you may try increasing the number of top layers (6-7 worked for me with Simplify3D in the past)
CaTZ CaTZ

Actually I already tried printing it hollow with 1.6 mm wall thickness. Looks great except for a bit of pillowing on top.
What was your slicer settings?
mcgybeer mcgybeer

Yes, 100% no supports. And they can be printed hollow, but it may be tricky for the bottom part of the leg joints. It worked for me with PrusaSlicer.
Hope it helps!
CaTZ CaTZ

is it possible to print this hollow & without support?
ghillohummel ghillohummel

Can you sell just one dog?
mcgybeer mcgybeer

No, sorry. The Copyright is non-commercial
klausheuer klausheuer

Are these okay for resale?
mcgybeer mcgybeer

Hi! Thanks a lot, I'm glad you like them. As it's said on the description, these are not MMU models. I just hand-painted some of them. Hope it helps!
amberj14147 amberj14147

Hi, these are so amazing. I am quite new but how do I get the two different colors. I have a dual extrustion printer. Thank you so much for making these, my son just loves them. I am working on buying the whole collection.
HIKO3D HIKO3D

amazing!

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!