Terrarium project by Mayku
- 2.3k views
- 6 likes
- 73 downloads
3D model description
Prepare the templates for the terrarium base and cover. Here we’re using 3D prints, but you could use wood or clay.
Take a Mayku Cast Sheet from the pack.
Peel the protective film from the top of the sheet. Remember, you can put this into household recycling.
Place the sheet in the FormBox, and start to heat the plastic.
Place the upper template on the centre of the vacuum plate.
Watch the plastic as it ripples at the edges and begins to droop in the middle.
Form the template with the Mayku Cast Sheet.
Allow the mold to cool and gently pop the template out.
Carefully cut away the excess with a pair of scissors.
Make a mold of the lower template in the same way.
Mix some concrete by adding water to the concrete powder.
Pour concrete into the mold to just below the brim.
Shake the mold to remove any air bubbles. You'll see them rise to the surface.
Leave to set overnight.
Gently remove the concrete by applying pressure to the top of the mold.
Leave to cure for 48 hours.
For a smooth surface on the base, place a sheet of coarse sandpaper on the table, and rub the base gently against it.
Now create your mini-world using sculpting clay, models and textured materials.
Place the lid you made earlier on top of your terrarium. They're perfect for decorating or to give as gifts!
3D printing settings
More about this project: https://make.mayku.me/projects/terrarium/
3D printer file information
3D design format: STL Folder details Close
- Publication date: 2018/09/28 at 16:08
We believe in the power of making. The #FormBox is a desktop vacuum former that lets you make professional products from your tabletop.
Best sellers of the category Home
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!