Skip to content

Concrete Soap Dish project by Mayku

Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

Prepare the template for the soap dish. Here we’re using a 3D print, but you could use wood or clay.
Take a Mayku Cast Sheet from the pack.
Peel the protective film from the top of the sheet. Remember, you can put this into household recycling
Place the sheet in the FormBox, and start to heat the plastic.
Place the outer template in the centre of the vaccum plate.
Watch the plastic as it ripples at the edges and begins to droop in the middle.
Form the template with the Mayku Cast Sheet.
Leave to cool slightly before removing from the FormBox.
Separate your template from the mold by applying firm pressure to the top of the form.

Mix some concrete by adding water to the concrete powder.
Add earth pigments to tint the concrete.
Mix thoroughly.
Pour concrete into the mold to just below the rim.
Shake the mold to remove any air bubbles. You'll see them rise to the surface.
Leave to set overnight.

Gently remove the concrete by applying pressure to the corners of the mold.
Leave to cure for 48 hours.

For a smooth surface on the bottom, place a sheet of coarse sandpaper on the table and rub the dish gently against it.
Place your FormBox soap creations in your new soap dish!

3D printing settings

3D printer file information

  • 3D design format: STL Folder details Close
    • mayku-concrete-soap-dish.stl

    Learn more about the formats

  • Publication date: 2018-09-28 at 16:37




We believe in the power of making. The #FormBox is a desktop vacuum former that lets you make professional products from your tabletop.

Issue with this design? Report a problem

Best sellers of the category Home

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!