Tripod smartphone

me encanto el diseño. pero lo mismo q dijeron mas abajo. tendre que lijar bastante porque no calzan. gracias de todos modos

Here's a list of the file's translations to English (the original files have slightly corrupted names, due to them using invalid characters):
axe_de_patin.stl -> skate_axle.stl
axe_glissière_support.stl -> support_slide_axis.stl
axe_glissière_support_-rallonge.stl -> extension_slide_axis.stl
cl├®.stl -> key.stl
clip_gros_axe_central.stl -> large_central_axis_clip.stl
clips_vis_M8.stl -> screw_clips_M8.stl
crou_A.stl -> nut_A.stl
crou_B.stl -> nut_B.stl
crou_M8.stl -> nut_M8.stl
crou_M8-_entretoise.stl -> nut_M8_spacer.stl
deuxième_jambe_MOD.stl -> second_leg_MOD.stl
goupille.stl -> pin.stl
moyeu_central_pignon.stl -> central_hub_pinion.stl
patin.stl -> skate.stl
pignon_de_jambe.stl -> leg_pinion.stl
pignon_entrainement.stl -> drive_sprocket.stl
première_jambe_MOD.stl -> first_leg_MOD.stl
rondelle_2.stl -> washer_2.stl
rondelle_10.stl -> washer_10.stl
rondelle_20.stl -> washer_20.stl
support_pivotant_A.stl -> swivel_bracket_A.stl
support_pivotant_B.stl -> swivel_bracket_B.stl
support_smartphone_A.stl -> support_smartphone_A.stl
support_smartphone_B.stl -> support_smartphone_B.stl
support_tablette_7.stl -> support_tablet_7.stl
troisième_jambe.stl -> third_leg.stl
vis_de_fixation_M8.stl -> fixing_screw_M8.stl
vis_de_serrage_A.stl -> clamping_screw_A.stl
vis_de_serrage_B.stl -> clamping_screw_B.stl
vis_de_serrage_C.stl -> clamping_screw_C.stl
vis_de_serrage_D.stl -> clamping_screw_D.stl

Loved the design. After printing it took a lot of adjustments to get it all to fit properly. Much sanding was needed. I made sure my printer was freshly adjusted and the tolerances were accurate. Once together, I absolutely loved it. However, after using it for a while the screws would pop their heads off. I only had 3 of them do this, but it happened. If you tighten them a bit to make sure the stand or holder doesn't slip it can be too much for the bolt. I printed my bolts with 100% infill. I'm not sure what else to do. I use the tripod enough that I'm missing not having it. I'm thinking about drilling a very tiny hole on both sides down the shaft of the bolt to put in a metal pin. I'll probably use something like a paperclip to do that. I also thought about printing the bolts horizontal instead of vertical to get the strength of the layer lines that way, I'm just not sure how it will do, but it's worth a try. Not sure what else to do there. When printing this just be aware that you'll have to tighten them a lot and it could snap them.

Nice design!

Merci
Bonne journée

bonjour

super projet alors je me lance,j'ai commencé par les pièces rapides pieds goupilles écrous axes pignon
aucuns problème pour les réaliser sur créator pro
je ferais un retour quand j'aurais terminé

Christophe

The .stl files are not in English, could I please get a translation? Thank you.

Nice model. Two tips: It's nice to name parts from BOM in the same language like those on STL (BOM is English, STL parts French). And the exploded 3D drawing with parts named will be helful too. ;)