Skip to content

PRINT-IN-PLACE PHONE HOLDER - FOR SPACE?!

?
Creation's quality: 4.3/5 (35 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 71.2k views
  • 524 likes
  • 9.2k downloads

3D model description

This is my Fully 3D-Printed Phone Holder for your desk, car or Space station? Find out how why this is designed for space, and see it in action in my YouTube video:
https://youtu.be/TPQqFZdLm9o

Not print in place enough for you? See my “elevated” print in place Phone holder, where I combine it with a print in place scissor jack!: https://cults3d.com/en/3d-model/gadget/elevated-print-in-place-phone-holder

Print settings:

Layer height: 0.2mm or finer
Infill: 15-30% - Cubic
Cooling fan: 100%
Z-Seam alignment: Random
Top and bottom layers: 3, with lines pattern
Horizontal expansion compensation: -This is printer specific; I use -0.07mm, but I included a test piece for easier tuning.


Check out my social media for sneak peaks and memes:
YouTube
Facebook
Instagram


3D printing settings

Layer height: 0.2mm or finer
Infill: 15-30% - Cubic
Cooling fan: 100%
Z-Seam alignment: Random
Top and bottom layers: 3, with lines pattern
Horizontal expansion compensation: -This is printer specific; I use -0.07mm, but I included a test piece for easier tuning.

3D printer file information

  • 3D design format: STL Folder details Close
    • Desk_Stand.stl
    • Print-In-Place Phone holder.stl
    • Standoff.stl
    • TESTPRINT.stl
    • Vent_clip.stl

    Learn more about the formats

  • Last update: 2020/04/27 at 14:19
  • Publication date: 2020/03/12 at 15:42

License

CC BY

Tags

Creator

Creating things for fun and entertainment!

Check out my social media for sneak peaks and memes:
youtube.com/user/a09a21a

instagram.com/sunshine_turbo

Issue with this design? Report a problem

Makes created by the community

Best sellers of the category Gadget


Add a comment

12 comments

impossible a imprimé .......
les dents des engrenage sont fusionné dans le slicer
la position ( rotation Z) n est pas bonne dans le stl

je confirme, ce modele est nul

tried printing in pla and honestly went really bad, could you make a finishing guide i ended up napping the wrong piece and cutting up my hands

I was able to print this successfully, little bit of fiddling, lubrication, and it works perfectly! thanks

always fused with my printer, can you publish the gears and their holder stl to be be printed seperately? tks

No lo puedo hacer mover esta como pegado , alguna recomendación?

Brilliant design. But printing a thing with PLA to be used in a car where temperature goes over high like 60degC under the sun sounds not a good idea.
PETG/ABS may be a better choice.
Printing setting doesn't mention about support, needed?

Thanks!

Yep, good concept and free but but i tryed everything at any settings with a stock 0.4 mm nozzle, test block is still a solid brick.

Everything fused together... I printed this with Prusament PETG on a MK3S. Genius design though! I think I just need to work out my settings.

I printed this with PETG, and other gromit was basically fused into the toothbar. So no working item for me this time...
But it's really geniously put together, I have to investigate is the problem with my settings or with the filament, or in the file.

increible es una pasada

@broughit PLA

ABS or PLA?


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!