Just didn't have the personal time to complete this project sorry :/ but at least a Rancor came out of it :)
How to Print:
Parts: Print as you wish, as a whole plate or in pieces, or in sections - all files are included.
Infill: 10% infill on all parts except the arms I suggest at 30% to support the underneath of the balljoint. The hands and forearms need to be sturdy.
Shells: No more than 2, if you do you will need to slightly sand the balls to get them to fit in the joints. this is designed with a high tolerance to print at 0.2mm or below.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!