Skip to content

Imperial Gunner 3D Printable Helmet

Creation quality: 5.0/5 (2 votes)
Evaluation of members on the printability, utility, level of detail, etc.


3D model description

Imperial Gunner - 3D Printable Helmet 3D print model

*Updated 19th Feb.
Dome parts 3 and for were reported not flat on the build plate. This is due to the bevel under the dome 3 and 4 which is where the visor is meant to go, my apologies for anyone who had issues printing it flat. I have updated Parts 3 and 4 to sit dead flat, they will require some supports due to the overhang, but they are dead flat now.

Please contact us if there is an issue with any parts or you need alternative cuts.

Designed specifically for 3D printing, why not add an Imperial Gunner Helmet to your collection! Comprising of 29 parts (plus optionals) This has also been scaled as close to 501st scale as possible, or within 1.5cm

*Note - The crisp sharp images you see in the instructions represent the actual models, they are not fancy render effects. All pieces are void of visible polygons, ready for a clean silky smooth print and are modelled in hi-res.

We have done everything for you!

All pieces are cut and repaired using a professional grade repairing tool, all pieces are placed dead flat at 0,0,0 on the build surface for you. We have tried very very hard to ensure all you need to do is load the file, select your settings and press print.

included is a comprehensive instructions for all parts (the assembly guide has been uploaded for your viewing)

3D printing settings

This suit is cut for a 20xcmx15cmx15cm build plate (ie Wanhao/CTC/Flashforge) but parts will fit on a 15x15x15cm plate, just oriented differently.

All parts can be cut again and if you require any assistance with cutting parts smaller OR you would like the full piece of a part (ie you would like the chest in one piece) as long as you have purchased the pack, like a piece of software or hardware, we will support you on it regardless - as many edits as you require - from printing to finishing.


Since parts will be sanded and painted, we suggest 0.2-0.3mm layer height.

We suggest a 3-10% infill rate to keep the weight of the parts down. A full suit can be quite heavy if given too much infill.

Supports / Rafts
This is really up to you and your printer. These days printers with great cooling can perform some serious overhangs, it's going to come down to you knowing your printer and how what it's capable of. Please ask us a message in the comments if you would like to know more.

3D printer file information

  • Design number: 10552
  • 3D design format: STL Folder details Close
    • Hex3D_ImpGunner_Aerial.stl
    • Hex3D_ImpGunner_Dome_Part1.stl
    • Hex3D_ImpGunner_Dome_Part2.stl
    • Hex3D_ImpGunner_Dome_Part3.stl
    • Hex3D_ImpGunner_Dome_Part4.stl
    • Hex3D_ImpGunner_Dome_Part5.stl
    • Hex3D_ImpGunner_Dome_Part6.stl
    • Hex3D_ImpGunner_Dome_Part7.stl
    • Hex3D_ImpGunner_Dome_Part8.stl
    • Hex3D_ImpGunner_Dummy_Visor.stl
    • Hex3D_ImpGunner_Jaw_Part1.stl
    • Hex3D_ImpGunner_Jaw_Part2.stl
    • Hex3D_ImpGunner_Jaw_Part3.stl
    • Hex3D_ImpGunner_Jaw_Part4.stl
    • Hex3D_ImpGunner_Jaw_Part5.stl
    • Hex3D_ImpGunner_Jaw_Part6.stl
    • Hex3D_ImpGunner_Jaw_Part7.stl
    • Hex3D_ImpGunner_Jaw_Part8.stl
    • Hex3D_ImpGunner_Left_Back_Rivet.stl
    • Hex3D_ImpGunner_Left_Front_Rivet.stl
    • Hex3D_ImpGunner_Right_Back_Rivet.stl
    • Hex3D_ImpGunner_Right_Front_Rivet.stl
    • Hex3D_ImpGunner_RivetCaps.stl
    • Hex3D_ImpGunner_Scoop_Part1.stl
    • Hex3D_ImpGunner_Scoop_Part2.stl
    • Hex3D_ImpGunner_Scoop_Part3.stl
    • Hex3D_ImpGunner_Scoop_Part4.stl
    • Hex3D_ImpGunner_Scoop_Part5.stl
    • Hex3D_ImpGunner_Scoop_Part6.stl
    • Hex3D_ImpGunner_Scoop_Part7.stl
    • Hex3D_ImpGunner_Scoop_Part8.stl

    Learn more about the formats

  • Last update: 2017-04-12 at 18:08
  • Publication date: 2017-04-09 at 11:27


CULTS - Private Use

Issue with this design? Report a problem.

Best 3D printer files of the Fashion category

Best sellers of the category Fashion

Add a comment


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

100% secure payment with PayPal or Credit Card.