Do you have the latter model Spandau LMG 08/15 machine gun? The one that I just purchased was version 1 of this gun and I was looking for version 2.
- 0 likes
👋 Hi everyone! This thread is public, so let’s keep it nice and respectful. No ads, spam or nasty stuff!
🇦🇺 User's country: Australia
🌐 Member’s preferred language: English. You can translate online via DeepL.
💡 Are you referring to a particular model? Add the link, title or model number.
🖼️ Want to post photos? Use a free host like ImgBB and paste the links in the message.
✍️ Writing Tips: Use the Markdown format to structure your text and make it more readable.
Write your message:
22 comments
I have the other version without the cooking handle. I believe that that was earlier than the handle but I could be wrong. Just have a look at my models and you will see it.
- 0 likes
From the information that I have, the "cooking handle" was the first iteration of the Spandau LMG 08/15 model. I will check out your models to find the other one. Thank you. Ken
- 0 likes
Absolutely, If you scale all peices the same you should have no issues.
- 0 likes
Good evening.
Before I sacrifice time, when scaling the USS Oregon submarine, is it safe to simply scale each part by the same percentage and still have things mate up?
Many thanks, Matt
- 0 likes
It should scale with no issues, if you go smaller some of the tolerances might get a little tight though.
- 1 like
Hi I’d like to talk to you about the Lamborghini countach space frame model.
Could you explain to me how accurate this model is, and provide some of your sources you based this model off of. I’d like to buy it if it’s accurate enough
- 0 likes
Hi Kydo, The frame is the result of information gathered from reports and photos and magazine articles. I have never seen a real chassis in person. It will almost certainly have errors when compared to the real thing. I consider it more of an artistic sculpture peice than an actual perfect representation of an actual chassis. Hope this helps, Jason
- 0 likes
Hi,
I just wanted to let you know that I’ve been trying to download the Lamborghini chassis file, but I haven’t been able to. I’ve tested it on several devices and browsers, but it still doesn’t work. Could you please check if the link is correct or if there’s another way to access the file?
Thanks in advance. Looking forward to your response.
- 0 likes
Sorry to hear your having an issue will check the download package when I'm able too should be able to tomorrow morning Australian time
- 0 likes
Hi I have checked the file and it is currently working, see if you can try again. If it doesnt work let me know and I will email it to you.
- 0 likes
USS Oregon (SSN-793) Virginia class submarine: Quick question you wouldn't be able to produce an assembly out of the submarine or an .obj, .3mf, .dbl with the color/visual details showing? I am looking to use GrabCAD to print this model on a polyjet 3D printer. I would need to have the single submarine model with all of its details saved in one of the previously mentioned formats. I will be happy to pay and share a photo of the final print if possible!
- 0 likes
Hi, when you say colour showing would that include the painted details? or just the main colour differences on the deck, prop and aerials.
- 0 likes
I should be able to do that by tomorrow. I'm currently on holiday with my family but will see what I cab do.
- 0 likes
https://cults3d.com/es/modelo-3d/juegos/pirelli-cinturato-p7-tire-345-35-vr-15-rear-tire
I PURCHASED THIS TIRE BUT WHEN I PRINTED IT IT CAME OUT HOLLOW. COULD YOU MAKE IT SOLID PLEASE
- 0 likes
Would it be possible to draw the German steel helmet for the trailer coupling? ;)
- 0 likes
Do you mean like a helmet that goes on top of a tow ball
- 0 likes
Yes that what i mean :)
- 0 likes
That shouldn't be a problem leave it with me.
- 1 like
What is your email, I have designed one to go on a 1 7/8 or 50 mm ball. I will send it over and you can see if its what you want.
- 1 like
You are really fast.
Good job!
sknotz92@googlemail.com
- 0 likes
Should be in your email now
- 0 likes
What scale is the Spandau machine gun? I am looking for 1/3 scale. Thanks, Norman
- 0 likes
The scale is 1/8. Most 3d programs will be able to change the scale for you. To go from 1:8 to 1:3 just enlarge it by 8 times and then divide it by three.
- 0 likes
Thanks for your like !!
These are my designs of some engines:
FERRARI F40 LE MANS https://cults3d.com/en/3d-model/gadget/ferrari-f40-lm-le-mans-engine
JAGUAR XKE E-TYPE https://cults3d.com/en/3d-model/gadget/jaguar-xke-e-type-engine
DODGE VIPER V10 https://cults3d.com/en/3d-model/gadget/dodge-viper-v10-engine
FORD COYOTE 5.0 V8 https://cults3d.com/en/3d-model/gadget/ford-coyote-5-0-v8-engine
MERCEDES 300SL GULLWING https://cults3d.com/en/3d-model/gadget/mercedes-300sl-gullwing-w198-engine
CORVETTE LS3 https://cults3d.com/en/3d-model/gadget/corvette-ls3-engine
FORD PREDATOR GT500 V8 https://cults3d.com/en/3d-model/gadget/ford-predator-gt500-5-2-v8-engine
FORD FLATHEAD V8 https://cults3d.com/en/3d-model/gadget/ford-flathead-v8-engine
FERRARI 458 https://cults3d.com/en/3d-model/gadget/ferrari-458-engine
CORVETTE ZR1 LS9 https://cults3d.com/en/3d-model/gadget/corvette-zr1-supercharged-ls9-engine
DODGE SRT HELLCAT https://cults3d.com/en/3d-model/gadget/dodge-challenger-srt-hellcat-hemi-engine
NISSAN RB26 SKYLINE GT-R https://cults3d.com/en/3d-model/gadget/nissan-rb26-skyline-engine
TOYOTA SUPRA 2JZ GTE VVT-i https://cults3d.com/en/3d-model/various/toyota-supra-2jz-gte-vvt-i-engine
CHEVROLET ZZ632 V8 https://cults3d.com/en/3d-model/various/chevrolet-zz632-v8-crate-engine
DODGE HEMI 426 https://cults3d.com/en/3d-model/various/dodge-hemi-426-engine
CORVETTE 327 https://cults3d.com/en/3d-model/various/chevrolet-corvette-327-with-rochester-injection-engine
CHEVROLET CAMARO ZL1 - LT4 ENGINE https://cults3d.com/en/3d-model/various/chevrolet-camaro-zl1-lt4-engine
FORD FR9 V8 NASCAR 358ci https://cults3d.com/en/3d-model/various/ford-fr9-carb-v8-nascar-358ci-engine
DODGE MOPAR 440 MAGNUM https://cults3d.com/en/3d-model/various/dodge-440-magnum-engine
COLLECTION OF PETROL FUEL DISPENSERS - EQUIPMENT is coming :-)
subscribe to always receive updates on my projects!!
MOTABAS.
- 0 likes
Yes, I have nearly finished the entire Fokker Dr1 and will be uploading them soon.
- 2 likes
Thanks. I will wait
- 0 likes
Is there any way to download the entire Fokker DR.I as one download? What sources of information did you use to design this model?
- 0 likes
Any other parts for Fokker?
- 0 likes
Hi, not sure if you got my public message but yes. There is more to come doing the entire aircraft and will upload as I finish them.
- 0 likes
Please disregard. I see I just had to re-download it.
- 1 like
I have uploaded the thickened top cowl
- 0 likes
Thank you. How do i access the new version?
- 0 likes
Would you also be able to do the same with your Fokker Dr1 top fuselage cover plate? I am not able to add wall thickness to prevent it from failing using the same profile as the cowling.
- 0 likes
I'll let you know when its done.
- 0 likes
Thats awesome. I very much appreciate your help. Thank you
- 0 likes
Thats awesome. I very much appreciate your help. Thank you
- 0 likes
Thank you.
- 0 likes
Hi there again, I have dropped in a thickened 1:4 scale version of it for you. I ran it through a couple of slicers at 0.2 mm layer height and it gives about 8 layers at the top now. If you have any issues just let me know.
- 0 likes
This is beautiful Jason! What suport do you suggest for a pla print? I havent been able to print thicker wall for my 1/4 scale, any tips?
- 0 likes
Hi there, what I can do is thicken the model for you, that one was really designed for resin printers. I will let you know when I update the model and you should be able to download it again free of charge, if not let me know and I can email it to you directly.
- 0 likes
This is beautiful Jason! What suport do you suggest for a pla print? I havent been able to print thicker wall for my 1/4 scale, any tips?
- 0 likes
Hi Jason I build in 1;32 what would be a good setting for that size & have you done any in that size? Thanks, Dan
Hi Dan, most of the parts that I have put up are pretty accurate to the original parts. And the main scale I am trying to get to is 1:8. Even at a scale of 1:8 most of the sheet metal parts are really thin. I haven't tried them on an 8K or 12k printer but I wouldn't expect a good outcome at 1:32.
thank you