70 comments

Hi, I really like your models and design, I just bought the new Makita cyclone attachment and I saw it needed shorter filters, I don't really know anything about 3D printing, someone at word will do the deed, I saw this: https://cults3d.com/:2106759
And I would like if you could go an attachment that is only an extension of the container, like in the middle of the vacuum cleaner, between the main piece and the dust collector.
Can you please do this?

Hi, I just purchased and downloaded the MTG 5 box design option.

https://cults3d.com/en/3d-model/game/blue-100-card-commander-geared-deck-box-with-magnetic-latch

Not sure what is the right size magnets for these (double/single, etc).

I am having trouble sourcing the right magnets to fit these boxes.

Can you send me the correct sizes or an Amazon link to the right size SKU?

Thank you,

Paul

Hello, I really like the non-textured deck box. Do you have the 4 magnet version for this one as well? I see it's available for the textured version. Thanks!

Hello. I was wondering if it would be possible to get a version of the see through geared deck box without the texturing like you've done for the solid ones

https://cults3d.com/en/3d-model/game/geared-deck-box-with-magnetic-latch
Hello, I printed this file, but it seems that printing the top cover horizontally and manually adding some supports to the gear part results in a better finish. While printing it vertically doesn't require supports, the layer lines on the curved parts are quite poor. Could you provide a version without the curved part, similar to the top cover in your free version? Perhaps I could send you comparison pictures of the results from printing it vertically and horizontally via email?
https://www.printables.com/model/2402-ccg-geared-card-box-v2-magnetic-latch

question, is it possible to have https://cults3d.com/en/3d-model/game/geared-deck-box-with-magnetic-latch edited for me so I can have a showcase for the commander?

all it would be is extruding the outer wall and making a 2 mm hole with 3 mm wide walls and do the same thing for the lid with two magnets so when you open it the commander card will be exposed from the top opening and can slide it out of the base. and of course, make a hole for the commander card to show.

I know there will be wiggle room but it means there will be enough space for a hard sleeve and also would make the card not interfere with the top opening.

willing to pay for the edit if needed too

I really like this design. Great work. I have downloaded and printed one version. Working on tolerances and whatnot. Overall, great. Have you considered adding a dice storage element to it. I'd go with it a little taller having a drawer on the bottom (problematic for dropping the sides) or section inside that comes out like the card storage for the dice. Keep up the great work.

Hello, I purchased the box with the wave. When I unzipped, there were only 4 files. It looks like I did not get the two lid files with the 4 magnet option. Is there a way for me to get those? Thank you.

Hi i recently print the geared box for commander and some friends wants to buy me some boxes, there are any chances that you can change the licence in order to public some of the boxes that i am printing in social media to sell them ?

Hi, I want to add the upgrade hotend to my Adventurer 3. If you still have the printer. Would you mind sharing a photo?

Hola buenas tardes me falta en el stl los archivos de los símbolos del mana podría pasármelos porfavor?

Ought the 5 color mtg commander boxes and printed the black box first and everything looks great but when I put it together the box stays slightly open even though I have the inner box on the right tooth of the gear. I can push it closed but it feels like it’s binding just a little. Do you know what o can do to make it work. Seems like the edges of the gears are altillo thicker than the rest of the print. Using a bambú x1c so it should already account for proper extrusion.

I did not realize you had a combo pack, if i purchase that after buying one deckbox, will i be able to have the price reflect that I purchased one already?

Hello! I printed https://cults3d.com/en/3d-model/game/white-100-card-commander-geared-deck-box-with-magnetic-latch and can’t close it with cards in it. Any tips on what I’m doing wrong?

Hi there, a friend of mine is planning to start a campaign to support different orphanage. We are planning to (if you will agree) buy and sell this deck box design in the said campaign. Majority of the proceeds will be for the campaign and we will only be getting a part of it to cover for the cost of PLA and magnets. Please let us know.

Hello, I really like the hub deck box version 1.1, but I don't need the doors with trays. Are there blank doors with the right size? The alternate doors in the folder are for version 1.

Hi there! I recently got your Commander Hub Deck box and currently am putting it together, I'm a bit confused about the 10x3mm magnets, do you perhaps have a video or some sort of image to show where the magnets need to go?

We are attempting to make the shark 5 spool buffer box. Do you happen to have anything that shows how to assemble this? Thank you!

Any chance I could know where the skull and zombie images are from? I would like to paint my box but would like a reference image if possible to better tell where the shapes start and stop on the design

Hello, was wondering if you'd be okay with me printing some of your blank or even designed commander MTG boxes for my local card shop to sell/use in giveaways. Just got a couple printed for personal use and they are awesome. Not many people in the scene around here have printers and this would be an easy way to recoup costs for whoever would want some for a couple bucks a box. Will still print for people for free if they are locals I know but just so the shop can keep a stock was wanting to get your okay to let me stock them for the shop sell them.

hiya, i was wondering if i could commission for you to make a few small alterations to your deck box. i would try doing it myself but I'm pretty useless at 3d modeling. I'm trying to make a little deck box keychain so i need to change the dimensions and make it smaller. but i also need to add a loop to the top. your deck box is perfect for this because if i add two loops on either side where they come together, it will guarantee the deck box will never open up by itself which is pretty important when you just have the thing dangling on your belt :)

Hiya. I was wondering if i could commission a customization of this deck box. They are some pretty simple alterations. I tried to do it myself but I'm pretty useless when it comes to 3d modeling.

Afternoon, I love the deck box just finished creating it and it works like a charm. I was wondering though I wanted to see if I could change the dice trays for turn dials for life counter, casts, and damage (or just remove damage). Would that be something you'd be willing to help me with? I would obviously pay you for your time if you were available. I was thinking of something like this https://cults3d.com/:472902. Please let me know what you think thank you very much.

Hey, love the card box and did purchase the file.
I have no experience when it comes to 3D printing and am looking for a holder for my uni sample materials.
Could you help with remodelling the case to hold my sampleholders? Would pay for your time as well.
Greetings!

Does the commander hub box fit double sleeved commander decks?