Here is our kit to enhance the Nasa Space Wrench!
The kit is composed by: the Nasa Space Wrench, the unlocker of the wrench and the universal screwdriver joint.
You can find the Nasa Space Wrench here:
Our universal screwdriver joint is designed to be easly inserted on the wrench pin; once you placed it on the wrench you can use any kind of screwdriver you need.
To secure all the parts, we used two little magnets. The first one is inserted in the pin of the wrench; to do this, we drilled a little hole and then we glued the magnet inside it.
The second magnet was glued inside the squared hole of the universal joint. In this way the screwdriver wouldn’t fall down while using the wrench.
We used PLA to print all the kit with a DeltaWASP 20x40 3Dprinter; we used a 0.4 mm nozzle and a 1.75 mm wire.
To print the whole kit we used:
0.15 mm layer height
1.6 mm shell thickness
0.9 mm bottom/top thickness / 0.6 mm for the universal joint
35% fill density
5 brim lines amount
200°C printing temperature
50°C bed temperature
+LAB is the new 3Dprinting lab of Politecnico of Milan. Our team is composed by designers and engineers conducting academic research on this amazing technology!
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!