Glue, Accelerator and Light Machine Oil Caddy
- 819 views
- 2 likes
- 60 downloads
3D model description
No springs, no motors, no gears; just a compartmentalized box.
I designed this compartmentalized box to securely hold the glues, accelerators and light machine oils I use while assembling machined and/or 3D printing projects. Protecting the glues, accelerators and light machine oils from being bowled down by my errant desktop tested designs (e.g. "Windup Helicopter") and spilling across the desk, this caddy keeps them securely in place in the "highly likely" event of a collision, especially the glues (minimizes trips to the acetone tank).
Trammel the build plate before printing. I've added hold down disks to the corners to assist in avoiding warping.
Designed using Sketchup Make 2015, and printed in PLA on a Makerbot Replicator 2 using Makerware 188.8.131.52 "Standard" Settings (.2mm layer height, 2 shells, 10% infill).
3D printing settings
Trammel the build plate before printing. Takes a long time to print.
I added hold down disks to the corners to assist in avoiding warping. After printing, carefully remove them with a modeling knife.
- 3D file format: STL
- Publication date: 2018/06/08 at 14:07
The more mistakes I make, the more knowledge I gain.
Best sellers of the category Tool
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!