Skip to content

Customizable Cable Tie

3D model description

MakerBot Customizer Challenge Runner-Up !

A Cable Tie that works and can do the heavy lifting ! Can be customized for various purposes including a hole for a Screw and a Release Tab.

3D printing settings

Print with 100% fill, 0.27mm Layer Height and 0 Shells.

Recommended materials to print with, ABS and Taulman3D 618 Nylon.

ABS: Should be considered "Single Careful Use", i.e. clamp large items where the bend of the cable tie does not exceed the strength of the material.

618 Nylon: Is the best choice of material, and has similar performance to commercially made cable ties, as they are also made from Nylon. Maximum length cable tie prints well on a Rep 1 with 3M Blue Masking Tape on top of Kapton @ 120mm/s, 240C / 55C with zero warping / lifting.

PLA: Will work, but only for light things as it's fairly brittle.

  • 3D model format: STL

Tags

Creator

License

CC BY NC SA

Similar 3D files

Best sellers of the category Tool


Add a comment


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest, Banggood, Aliexpress or Ebay.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!