Ultimate Tomb Raider Part2 “Angie”- by SPARX

Now I have sculpted/deigned the many outfits for the previous Part1, here is the second part featuring Angelina as Lara Croft.
I did try to keep the skeletons as in the picture I used for reference in Part1 of Ultimate Raiders, but unless I filled the skeleton, they would be difficult to print to look correct . . . . so its Zombies!

I plan to release the third part of the diorama of the third Actor Alicia, using this Model and Part1 Sophie so stay watching for the release.

Part1 Sophie available Here;
https://cults3d.com/en/3d-model/art/ultimate-tomb-raider-by-sparx

I always intended to fit my diorama in a glass tube as in pictures but the 3 parts will all be able to be displayed without the inclusion of the glass tube.

The last pictures show the two parts in the tube and displayed on a lighted motorised turntable, if anyone requires the cover I have used for the turntable please message me.

The model Base has separate Water part in the well designed to be printed in clear material to allow lights to shine through.
The model is 1/6th scale
The full model including base is 233mm height x 198mm x 198mm

The model prints and fits together well. I have run various test on the 27 parts to ensure they fit . . as long as you do not scale down!

There are also a few Adult themed costume/bodies for Angie & Female Zombie contained in a “NSFW.zip”
(DON’T OPEN THEM IF YOU ARE OFFENDED) to add to your creation.

Parts;
Angie
2 x Heads
1 x Hand
1 x hand with Zombie hand
1 x Backpack
1 x Left Leg
1 x Right Leg
2 x Lower Torso
2 x Upper Torso

Zombies
1 x Male Zombie
1 x Male Zombie Arm
1 x Female Zombie Head
1 x Female Zombie Lower Torso
1 x Female Zombie Upper Torso
1 x Female Zombie Left Leg

1 Floor Base
1 x Water Insert

NSFW.zip Files
Angie
3 x Lower Torso
2 x Upper Torso

Female Zombie
3 x Lower Torso

27 PARTS TOTAL

PURCHASE OF THESE FILES DOES NOT ALLOW SELLING STL FILES OR MODELS MADE FROM THE FILES. . . DOWNLOAD IS FOR SINGLE BUYER USE ONLY

I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED

All parts are cut files to fit build plate of small resin printers like the Photon or have separate files than the FDM versions included.
These orientations work for FDM printing but you may find a better orientation that reduces support.
All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.

Why cut into many smaller parts I have been asked?
1. If you try and assemble this, then paint it . .it would be difficult to paint into hidden areas, less masking when painting separate parts.
2. Smaller parts not only allow for Resin print at full scale, but also allow individual parts to use less supports than one larger part on FDM printers
So now you know!
If you scale down the model the pins and magnet joints will become tighter so I cannot guarantee they will fit together at smaller scales. Scaling up is not an issue.
All of my models are only released when they can print! so please do not remix or "fix" faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print, make, enjoy.

3D PRINTING SETTINGS
Resin Printing;
Hollow 2.70 Raft 100%
Heads, Torso’s

DO NOT Hollow
Arms, Water Insert

FDM
Head, 0.12 80% fill speed 50
Rest at 0.16 30% fill, speed 70

ALWAYS dry assemble and “trim” parts prior gluing.
You can join some of the piece’s prior painting if you wish but will be easier to Join/Assemble and access certain parts if they are painted prior assembly. Look at the pictures of how to assemble parts.