This is Alfred,
Alfred is a gorilla but also a piggy bank!
You can place your large or small coins or simply all your unused small change.
Your pieces will be well kept with Alfred, but be careful not to get bitten when you want them back Alfred is often bad hair!
The parts are easily retrievable by unscrewing the trapdoor underneath
PLA Wood (Creality CR-10s) :
For nozzle diameter 0.40 mm
Extrusion multiplier: 0.95
Extrusion width: 0.40 mm
Retractable distance: 6.50 mm
Additional restart distance: - 0.20 mm
Vertical retraction lift: 0.25 mm
Retractation speed: 80 mm/s
Disengagement distance: 0.20 mm
Main layer height: 0.18 mm
Top solid layers: 4
Lower solid layers: 4
Contour shells: 3
Percentage of filling: 8%.
Contour overlap: 20%.
Supports the percentage of filling: 20%.
Substrate base layers: 2
Media type: normal
Support pillar resolution: 4 mm
Maximum overhang angle: 45° (can be increased to 60°)
Extruder temperature: 215°C
Heating bed (optional): 60°C
Printing speed: 50 mm/s
Under contour speed: 50%.
Under solid filling speed: 80%.
Under speed of the support structure: 80%.
Page translated by automatic translation. See the original version.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!