Mini Milk Box - Pen Cup

Here's an adorable miniature Japanese-inspired building that will hold your favorite pens!

All colors are nicely separated to be print-in-place.
There are small elements, so please ensure your bed is prepared for perfect adhesion. All the pieces are available one by one if you want to print only one.

Easy to print - No support needed - all parts separated nicely

Use super glue to assemble everything. (I am using: BSI Insta-Cure+ super glue)

Please, tag me on Instagram or TikTok (@Holoprops); I would be thrilled to see your Buckets!

⭐⭐⭐⭐⭐
IMPORTANT NOTE:
If you want to sell 3D prints based on my designs legally, please become a supporter on the Thangs Membership:
🔵Thangs - Membership

All my Designs are covered by a Creative Commons Non-Commercial License on Cults 3D. The sale of prints using my designs is the sole right of myself, the designer, and my active supporters to do so. Please understand every design is many days of work and multiple prototype prints to ensure quality.

Happy printing!

To get the best out of the STL file, please follow these guidelines:
• Layer Height 0.2mm for the cauldron and the spoon.
• No support is needed for any parts.
• Nozzle 0.4mm
• Recommended infill 15/20%.
• Infill Pattern: Gyroid

• Printed on a Prusa Mini.
• If you get some failed prints, take it easy and try new settings on your machine.
• If you get some failed prints, take it easy and try new settings on your machine.
• Do not print over 50 mm/s. A lower speed, like 40 or even 30 mm/s, will always produce better results.
• Make sure your bed is correctly leveled. Then check again :D
• Try to hide the seam behind the bucket.
• Make sure your printing and bed temperatures are adequate for the filament you are about to use.