After my TieFighter Gen1 I wanted to do a new and simplified version. In addition, there also shouldn’t be any visible cables anymore. After a few weeks Gen2 was done. But as it is, real life goes on and I haven’t get any time to put it online. Until now….
I use quite normal materials and components as every model builder should have at home. Actually the whole building should be self-explanatory, but I made a short assembling video here: https://www.youtube.com/watch?v=Rvou3XwCeqw&t=180s
Depending on the controller, the longitudinal stability (sensitivity) could cost some troubles. Therefor I’ve printed the Winglets without cover layers and with an infill of something around 45%.
Have fun! I hope it fits all for your satisfaction…
Some Flightfootage you’ll find here : https://youtu.be/2D95EzOs3RY
ZYYX 3D Printer
10% - 45%
Print the winglets without top/bottom layer and with something about 45% infill.
3D-Printing since 2015, therefor I use ZYYX 3D Printers. My designs are made with SOLIDWORKS.