Skip to content

John Deere Tractor and Trailer

Creation quality: 5.0/5 (2 votes)
Evaluation of members on the printability, utility, level of detail, etc.


3D model description

Just a little tractor for my kids to play. Kind of an John-Deere-Design (nothing runs like a Deere)...

Parts are pretty simple, just print and plug/glue them together. The original design with 100% print settings needs some M4 treaded rod. I've printet some Tractors with 150% print settings, therefor you can use the "Axle_for_150.stl" and the same M4 treaded rod.

Parts must be aligned for your printer! Some of them are twisted in my files... take care.

Part List Tractor:

1x Body

1x Roof

1x Rooftop

2x Fender Front

2x Fender Rear

2x Rim Front

2x Rim Rear

2x Tear Front 1

2x Tear Front 2

2x Tear Rear 1

2x Tear Rear 2

Part List Trailer:

1x Trailer Body

4x Trailer Rim

4x Trailer Tire 1

4x Trailer Tire 2

...and have fun! :-)

3D printing settings

ZYYX 3D Printer



All parts should be easily printable. I have printed my stuff on the pictures with 150% increase and with PLA from BQ, except the tires, they're printed with Ninjaflex. Most parts don't need any support, except the whiffletree from the trailer.

Attention: Parts must be aligned! The coordinate system is not designed for the print!


I think the assembly can be done without any explanations - in my case I have glued the wheels and the roof with "Uhu Por" glue together.

3D printer file information

  • 3D design format: STL Folder details Close
    • Axel_for_150.STL
    • BodyV1.STL
    • FenderFrontV1.STL
    • FenderRearV1.STL
    • RimFrontV1.STL
    • RimRearV1.STL
    • RoofV1.STL
    • RooftopV1.STL
    • TireFront1.STL
    • TireFront2.STL
    • TireRear1.STL
    • TireRear2.STL
    • TrailerBody.STL
    • TrailerRim.STL
    • TrailerTire1.STL
    • TrailerTire2.STL

    Learn more about the formats

  • Publication date: 2017-06-16 at 16:34


CC BY-SA - Attribution - Share alike

Issue with this design? Report a problem.

Best 3D printer files of the Game category

Best sellers of the category Game

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!