Large clam sea shell scanned on a Digitizer using MultiScan and the Base Plate for support while scanning (Scanning shells can be difficult if the shell is very thin... coating them with a flat paint water based paint helps achieve good results).
REFER TO INSTRUCTIONS FOR PRINTING TO ENSURE GOOD RESULTS
Import the .stl and leave the orientation as it is. Turn on both Raft and Support. This will provide adequate support to build the shell up but minimise the amount of material to be cleaned away afterwards.... at the current orientation there should only be a small amount of support behind the shell and on each side.
This prints very well on a Replicator 2 (PLA) with 3 Shells and 35% fill... this essentially makes it solid due to the thin walls.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!