Skip to content

Jack-O-Lantern Candy Dispenser

Creation's quality: 4.8/5 (4 votes)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

The Jack-O-Lantern Candy Dispenser is a fun way to dispense candy over the Halloween period.

The design features and internal structure that rotates to open / close a hatch in the mouth. It's easy to use... with the mouth hatch closed just pour candy into the hole in the top of the stem then rotate the stem to open the hatch and dispense candy out through the mouth.

At standard scale the dispenser will take candy up to approx. 15mm in diameter. Scale up uniformly to dispense larger pieces. Scaling down is not recommended as it will reduce the internal clearances which may result in the moving surfaces to fuse so the dispenser will not rotate to open / close.

This is an easy print but it is large and will take quite a while to print... but it's well worth the time / effort / cost. At standard scale the dispenser is approx. 110mm round and 88mm high including the stem. It will hold a surprisingly large amount of small pieces of candy... and can be used for years to come. Looks great in traditional pumpkin orange or any other color.

Do not use any automated support. The required support has been designed in and should snap away easily (Refer to the images for additional details). More than usual clearance has been designed in so the internal part should rotate free straight off the build plate. However, if it has fused slightly it is most likely the base shaft area so use a craft knife to gently break it free to turn.

Please refer to the print instructions and images for additional information... and post images of your Jack-O-Lantern Candy Dispenser in use for other members to see.

Note: If you like this check out the rest of my fun and practical designs.

  • 3D file format: STL
  • Publication date: 2019/07/05 at 16:06





Collection associated with this 3D model

Makes created by the community

Best sellers of the category Home

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!