Skip to content
Advertising

Skeeter Lowboy 1/14 scale

Advertising
Share
Add to
Make
?
Creation quality: 5/5 (3 votes)
Evaluation of members on the printability, utility, level of detail, etc.
License
Usages
3D design format
3 files (ZIP) Close
  • Flip Axle.zip
    • airbag bottom.stl
    • airbag top.stl
    • Flip Axle Frame L.stl
    • Flip Axle Frame R.stl
    • Rear_Frame Cross Brace back.stl
    • Rear_Frame Cross Brace.stl
    • Suspension Arm rear L.stl
    • Suspension Arm rear R.stl
    • Tail Light Lens.stl
  • Lowboy_V1.1.zip
    • Deck/Chain Bin 1.stl
    • Deck/Chain Bin 2.stl
    • Deck/Frame 1 V2.stl
    • Deck/Frame 2.stl
    • Deck/Frame 3.stl
    • Deck/Frame 4L.stl
    • Deck/Frame 4R.stl
    • Deck/Neck release handle.stl
    • Deck/Outrigger L.stl
    • Deck/Outrigger R.stl
    • Goose Neck/5th wheel plate.stl
    • Goose Neck/Base Lock Hook.stl
    • Goose Neck/BaseV2.stl
    • Goose Neck/Cross Brace actuators.stl
    • Goose Neck/Cross Brace Top.stl
    • Goose Neck/Front Hook L.stl
    • Goose Neck/Front Hook R.stl
    • Goose Neck/Goose Neck leftV2.stl
    • Goose Neck/Goose Neck rightV2.stl
    • Goose Neck/King Pin.stl
    • Goose Neck/Neck_Extension.stl
    • Goose Neck/Pawl Handle.stl
    • Goose Neck/Pawl Hook.stl
    • Goose Neck/Support Arm.stl
    • Jeep/5th wheel hook.stl
    • Jeep/5th wheel plate.stl
    • Jeep/airbag bottom.stl
    • Jeep/airbag top.stl
    • Jeep/bumper.stl
    • Jeep/Cross brace A.stl
    • Jeep/Cross brace B.stl
    • Jeep/Cross brace C.stl
    • Jeep/Cross brace D.stl
    • Jeep/Flat Plate.stl
    • Jeep/Frame L 1.stl
    • Jeep/Frame L 2.stl
    • Jeep/Frame L 3.stl
    • Jeep/Frame L.stl
    • Jeep/Frame R 1.stl
    • Jeep/Frame R 2.stl
    • Jeep/Frame R 3.stl
    • Jeep/Frame R.stl
    • Jeep/Hook_release_Manual.stl
    • Jeep/King Pin.stl
    • Jeep/Tail Light Lens small.stl
    • Lowboy_Assembly.pdf
    • Rear Frame/airbag bottom.stl
    • Rear Frame/airbag top.stl
    • Rear Frame/Cut for 220/Rear Frame L1.stl
    • Rear Frame/Cut for 220/Rear Frame L2.stl
    • Rear Frame/Cut for 220/Rear Frame R1.stl
    • Rear Frame/Cut for 220/Rear Frame R2.stl
    • Rear Frame/D-Ring.stl
    • Rear Frame/Rear_Frame Cross Brace back.stl
    • Rear Frame/Rear_Frame Cross Brace.stl
    • Rear Frame/Rear_Frame L.stl
    • Rear Frame/Rear_Frame R.stl
    • Rear Frame/Suspension Arm front L.stl
    • Rear Frame/Suspension Arm front R.stl
    • Rear Frame/Suspension Arm mid L.stl
    • Rear Frame/Suspension Arm mid R.stl
    • Rear Frame/Suspension Arm rear L.stl
    • Rear Frame/Suspension Arm rear R.stl
    • Rear Frame/Tail Light Lens.stl
    • Stinger/airbag bottom.stl
    • Stinger/airbag top.stl
    • Stinger/cut for 220/Frame L 1.stl
    • Stinger/cut for 220/Frame L 2.stl
    • Stinger/cut for 220/Frame R 1.stl
    • Stinger/cut for 220/Frame R 2.stl
    • Stinger/Frame_Stinger_Front.stl
    • Stinger/Frame_Stinger_L.stl
    • Stinger/Frame_Stinger_Mid.stl
    • Stinger/Frame_Stinger_R.stl
    • Stinger/Stinger_Frame Cross Brace back.stl
    • Stinger/Stinger_Frame Cross Brace.stl
    • Stinger/Suspension Arm L.stl
    • Stinger/Suspension Arm R.stl
    • Stinger/Tail Light Lens.stl
    • Wheels and Tires/Dual Spider Wheel.stl
    • Wheels and Tires/Dual Wheel.stl
    • Wheels and Tires/spider Hub.stl
  • Mods.zip
    • Petr Stepanek/Petr Stepanek.txt
    • Petr Stepanek/rear_frame A.stl
    • Petr Stepanek/rear_frame B.stl
    • Petr Stepanek/wheels cover A.stl
    • Petr Stepanek/wheels cover B.stl

Learn more about the formats
Last update
Publication date
Design number 2294897
BuildItBetter

BuildItBetter

Certified account
Issue with this design? Report a problem.

7 comments

Add a comment

👉 Sign in to write a message

7 comments

Importeater189
Importeater189

Was just going through the things to order and the spring assortment isn’t available anymore. Do u have another link or know the specs of the springs needed from the assortment u put in the manual?

BuildItBetter
BuildItBetter

The only spring I used from the assortment was for the goose neck lock handle. It is 18mm long, 5mm outside diameter. 4.5mm inside diameter. It goes over a 3mm threaded rod and doesn't need to be exact. Length can be 15-20mm and inside diameter can be 3.2-4.5mm

Importeater189
Importeater189

Yeah there’s reference to that assortment for the lock handle on the deck and the 2 on the neck for the updated pawls on the neck itself

BuildItBetter
BuildItBetter

oh, that's right I had forgotten about that. I'm not at home to measure them now. I believe they were the smallest ones from the pack... I'll get a measurement for you when I get home. If you join and ask on the discord server someone there might be able to measure it quicker for you. discord link is in the object description or in the instructions.

davidhenique
davidhenique

Hello, I bought and printed your trailer...
It's superb. Happy birthday, thank you again.
My question, I have a question: what is the single jack used for and what are the double jacks for, please

BuildItBetter
BuildItBetter

They are used to make the removable goose neck functional. you can see their operation in my youtube videos.

davidhenique
davidhenique

Ou je peux trouvez vos vidéo svp

BuildItBetter
BuildItBetter

https://www.youtube.com/@BuildItBetter3D
KW79
KW79

I have printed quite a few trailers for 1/14 semi trucks, the work you do is amazing. this trailer is a work of art. thank You!! just bought the side dump file will be doing that next. then probably buy every other file you have available .

BuildItBetter
BuildItBetter

Thanks so much! I’m glad you’re enjoying my work.

sburggsx
sburggsx

When I drop the wheels into a slicer, they come up at 45 degrees. Is this the orientation we should print them at?

BuildItBetter
BuildItBetter

If printing with an fdm printer then lay the wheels flat. If using a resin printer then keep them at 45.
Print tires laying flat.

fullrangemaintenance
fullrangemaintenance

Is the main frame designed the same as your flatbed trailer where it is all sections that bolt together to the cross members? I'm wondering how easy it would be to line the inside of the frame rail with metal

BuildItBetter
BuildItBetter

No, the frame prints in sections that are held together by a long threaded rod. You can look at the instructions to see how it goes together. https://drive.google.com/drive/folders/1TJHn0M5WpqKlnYMfx8q5pB37VIFzi-lx

  • 1 like
ottohaven
ottohaven

Best lowboy for its price.
All parts fit super.
Design is great.
And you can easy change the configuration.
Great model.
burner666
burner666

So far the best model I have bought from cults. All parts fit 100% and the instructions are described in detail. Thanks!

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi Donate
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.