Skip to content
Advertising

SkeeRide 2 Polar

Advertising
Share
Add to
Make
?
Creation quality: 5/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
License
Usages
3D design format
4 files (ZIP) Close
  • Mods 1.zip
    • AoCH sanders/AoCH sanders mods.txt
    • AoCH sanders/sr2_polar_skid_for_220_bed_v2_.stl
    • AoCH sanders/sr2_polar_skid_v2_rub_rail.stl
    • Johnsonfab.ny/Johnsonfab.ny Mods.txt
    • Johnsonfab.ny/sr2_front_upper_shock_mount.stl
    • Johnsonfab.ny/sr2_polaris_20_lower_A_arm_Left.stl
    • Johnsonfab.ny/sr2_polaris_20_lower_A_arm_Right.stl
    • Johnsonfab.ny/sr2_polaris_20_upper_A_arm_Left.stl
    • Johnsonfab.ny/sr2_polaris_20_upper_A_arm_Right.stl
    • Johnsonfab.ny/sr2_polaris_5_lower_A_arm_Left.stl
    • Johnsonfab.ny/sr2_polaris_5_lower_A_arm_Right.stl
    • Johnsonfab.ny/sr2_polaris_5_upper_A_arm_Left.stl
    • Johnsonfab.ny/sr2_polaris_5_upper_A_arm_Right.stl
    • Kieran/A-Arm_Bottom_20.3mf
    • Kieran/A-Arm_Top_20.3mf
    • Kieran/Kieran.txt
    • Syphen/SR2_Polar_Skis_Beefy.stl
    • Vassa/Hood_Front.3mf
    • Vassa/Hood_Front_uppe.3mf
    • Vassa/Mods Vassa.txt
    • Vassa/Vassa_Design_Wirechannel.3mf
    • Vassa/Vassa_Mod_HandleBars_fat_detail.3mf
    • Vassa/Vassa_Mod_Polar_Ski.3mf
  • Mods 2025.zip
    • BIB/Cushion 2026 detail L.stl
    • BIB/Cushion 2026 detail R.stl
    • BIB/Seat Cushion 2026 detail L.stl
    • BIB/Seat Cushion 2026 detail R.stl
    • BIB/Seat Cushion 2026 top clean.stl
    • BIB/Seat Cushion 2026.stl
    • BIB/Seat Cushion Clean.stl
    • ROSSO-RC POLAR SNOCROSS.zip
  • SkeeRide 2 Polar V1.1.zip
    • Accessories/Foot Rail L.stl
    • Accessories/Foot Rail R.stl
    • Accessories/Front Bumper.stl
    • Accessories/Front reflector L.stl
    • Accessories/Front reflector R.stl
    • Accessories/Handle Bar High res.stl
    • Accessories/Handle Bar Low res.stl
    • Accessories/Handle Bar Med res.stl
    • Accessories/Headlight Glass.stl
    • Accessories/Headlight splitter.stl
    • Accessories/Hood emblem with star.stl
    • Accessories/Hood emblem.stl
    • Accessories/Hood RMK.stl
    • Accessories/Hood Side bump L.stl
    • Accessories/Hood Side bump R.stl
    • Accessories/Light lens.stl
    • Accessories/Pull Handle.stl
    • Accessories/Rear Bumper.stl
    • Accessories/Shock_Support.stl
    • Accessories/Small light lens left.stl
    • Accessories/Small light lens right.stl
    • Accessories/Snow Flap lens.stl
    • Accessories/Snow Flap polaris.stl
    • Accessories/Snow Flap SkeeRide.stl
    • Accessories/Snow Flap.stl
    • Accessories/tunnel reflector L.stl
    • Accessories/tunnel reflector R.stl
    • Accessories/Tunnel Wire Cover.stl
    • Body/Console Front color.stl
    • Body/Console no display.stl
    • Body/Console Side color left.stl
    • Body/Console Side color right.stl
    • Body/Console.stl
    • Body/Front End.stl
    • Body/Gas Cap tall.stl
    • Body/Gas Cap.stl
    • Body/Gas Tank.stl
    • Body/Gas Tank_with wrench holes.stl
    • Body/Hood Front v4.stl
    • Body/Left Bottom color Panel.stl
    • Body/Left Lower Panel.stl
    • Body/Left Side Panel.stl
    • Body/Left Side Panel_no inlay.stl
    • Body/Left top color Panel.stl
    • Body/Light Housing.stl
    • Body/Right Bottom color Panel.stl
    • Body/Right Lower Panel.stl
    • Body/Right Side Panel.stl
    • Body/Right Side Panel_no inlay.stl
    • Body/Right top color Panel.stl
    • Body/Seat Base.stl
    • Body/Seat Catch HD.stl
    • Body/Seat Catch.stl
    • Body/Seat Cushion.stl
    • Body/Seat Detail.stl
    • Body/Seat Latch.stl
    • Decals/Decals Read Me.txt
    • Documents/SkeeRide 2 Polar Authorization.pdf
    • Documents/SkeeRide_2_Polar_Assembly.pdf
    • Documents/Sold SkeeRide 2 Record.pdf
    • Frame/cut for 220 bed/Tunnel_Left_2.stl
    • Frame/cut for 220 bed/Tunnel_Left_3.stl
    • Frame/cut for 220 bed/Tunnel_Right_2.stl
    • Frame/cut for 220 bed/Tunnel_Right_3.stl
    • Frame/ESC_Mount.stl
    • Frame/Frame.stl
    • Frame/Motor_Mount.stl
    • Frame/Shock_Mount_Frame 8mm.stl
    • Frame/Shock_Mount_Frame.stl
    • Frame/Steering_Pinion.stl
    • Frame/Steering_Pinion_short.stl
    • Frame/Steering_Rack.stl
    • Frame/Tunnel_Center_back.stl
    • Frame/Tunnel_Center_Front.stl
    • Frame/Tunnel_Left_1.stl
    • Frame/Tunnel_Left_2-3.stl
    • Frame/Tunnel_Right_1.stl
    • Frame/Tunnel_Right_2-3.stl
    • Front Suspension/A-Arm Bottom Left.stl
    • Front Suspension/A-Arm Bottom Right.stl
    • Front Suspension/A-Arm Top Left.stl
    • Front Suspension/A-Arm Top Right.stl
    • Front Suspension/Ski_Hook Left.stl
    • Front Suspension/Ski_Hook Right.stl
    • Front Suspension/Ski_Left.stl
    • Front Suspension/Ski_Right.stl
    • Front Suspension/Spindle Left.stl
    • Front Suspension/Spindle Right.stl
    • Paint Model/SR2_Polar_Paint.3mf
    • Skid/Carrier_Wheel.stl
    • Skid/Cut for 220 bed/Rail_in_L_1.stl
    • Skid/Cut for 220 bed/Rail_in_L_2.stl
    • Skid/Cut for 220 bed/Rail_in_L_3.stl
    • Skid/Cut for 220 bed/Rail_in_R_1.stl
    • Skid/Cut for 220 bed/Rail_in_R_2.stl
    • Skid/Cut for 220 bed/Rail_in_R_3.stl
    • Skid/Cut for 220 bed/Rail_out_L_1.stl
    • Skid/Cut for 220 bed/Rail_out_L_2.stl
    • Skid/Cut for 220 bed/Rail_out_R_1.stl
    • Skid/Cut for 220 bed/Rail_out_R_2.stl
    • Skid/Cut for 220 bed/Rub Rail Left.stl
    • Skid/Cut for 220 bed/Rub Rail Right.stl
    • Skid/for shocks needing wider mount/Scissor Top 8mm.stl
    • Skid/for shocks needing wider mount/Shock_Spacer for 8mm gap.stl
    • Skid/for shocks needing wider mount/Torque Arm 8mm.stl
    • Skid/Idler_Wheel.stl
    • Skid/Idler_Wheel_Spacer.stl
    • Skid/Rail 165 Left.stl
    • Skid/Rail 165 Right.stl
    • Skid/Rub Rail 165 Left.stl
    • Skid/Rub Rail 165 Right.stl
    • Skid/Scissor Bottom.stl
    • Skid/Scissor Top.stl
    • Skid/Shock_Spacer.stl
    • Skid/Skid_Cross_Bar.stl
    • Skid/Tension Axle.stl
    • Skid/Tension_Front_Block.stl
    • Skid/Tension_Knob.stl
    • Skid/Tension_Rear_Block.stl
    • Skid/Torque Arm.stl
    • Track/Track A.stl
    • Track/Track B.stl
    • Transmission/Axle Jig.txt
    • Transmission/Axle_Shaft.stl
    • Transmission/Axle_Shaft_Jig_Bottom.stl
    • Transmission/Axle_Shaft_Jig_Top.stl
    • Transmission/Front Sprocket.stl
    • Transmission/Front Sprocket_spacer.stl
    • Transmission/Idler_Arm.stl
    • Transmission/Outer_Plate.stl
    • Transmission/Tension_bolt_mount.stl
  • VASSA Mods Polar and CatV2.zip
    • VASSA MODS desember 2024.zip
    • Vassa_part_for_Catalyst v2.zip

Learn more about the formats
Last update
Publication date
Design number 1608503
BuildItBetter

BuildItBetter

Certified account
Issue with this design? Report a problem.

3D printer file info

3D model description

1/5th Scale Remote Control Snowmobile. Finished size approximately: 200mm X 200mm X 660-737mm

The SkeeRide 2 is a complete new design. Taking from the knowledge gained from the SkeeRide and all of the community feedback, the SkeeRide 2 has been strengthened and improved in all aspects of the design. You can expect better durability, smoother suspension, and greater performance. Due to these changes the build will require more parts and may be considered a more complex build in comparison to the original SkeeRide.

Build Kits from RCPrinter: https://rcprinter.com/products/skeeride-2-build-kits

Digital files have a strict non-commercial, personal use only license. You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used in any way whatsoever in which you charge money, collect fees, or receive any form of remuneration.

Illustrated assembly instructions: https://drive.google.com/drive/folders/1TJHn0M5WpqKlnYMfx8q5pB37VIFzi-lx?usp=sharing

Reveal Video: https://youtu.be/82Cdqlm2ewQ

SkeeRide 2 Deep Powder: https://youtu.be/PApOBHtKqzc

Assembly Video: https://youtu.be/PApOBHtKqzc

Discord community for support: https://discord.gg/H7GvWfVB7p

People that will Print one for you! https://docs.google.com/spreadsheets/d/1RXSdDrZoAjLp8ws2RUS7CDb4d1NoUWAIu6UDZ1WH-EU/edit?usp=sharing

Contact BuilditBetter on the discord server if you wish to become authorized to sell the SkeeRide 2 in printed form.

Disclaimer: Due to printer abilities being different and always changing, and the nature of an off road vehicle there is a good chance you will break parts. Luckily they should be easy to reprint and fix rather quickly. I will do my best to provide support through discord and if files are found in need of improvement I will do my best to improve and then include for free for those who have purchased the files. I give no guarantee that it will print perfect on your machine or that things will not break when you send the sled flying off a cliff.

This product is not endorsed by or affiliated with: Polaris Inc. and its related businesses, including Polaris On-Road, Off-Road and Snow; Polaris Boats; Polaris Adventures; Indian Motorcycle; Kolpin; Pro Armor; Trail Tech; 509; KLIM; REVEO; 4 Wheel Parts; and 4 Wheel Drive.

3D printing settings

Settings included in the instructions

Categories

All categories › Gadget › Vehicles accessories

Tags

Advertising

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi Donate
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.