The Angel and the Succubus - by SPARX

Had this concept for a couple years now but never had the time to sculpt . . then saw another FB fake movie news on my feed that a new Barbarella movie starring Sydney Sweeney was in the making . . so Sydney the Succubus . . Jane the Angel and I was started.
So both a classic costume and Barbarella inspired costume torso’s included, as well as an additional Add-On pack for the less clothed torso’s available here;

NSFW ADD-ON pack download;

https://cults3d.com/en/3d-model/naughties/the-angel-and-the-succubus-add-ons-by-sparx-sparxbm

The model is a little less than 1/6th scale but not as little as 1/8th scale. This was necessary to allow the model to fit in a 300mm cubed display, the model will easily scale up to full 1/6th should you wish.
The full model without base is 232mm height x 237width x 193mm deep.

The model created a number of problems to be able to print due to supports etc. This is why it is finally split into two separate torso’s and legs = less supports required and faster printing. A zip file with my orientations for print and assembly instructions is included.
As you can see in images it prints and connects very well, no time to upload painted images as yet due to other commitments. . but when I do I will add some . . for now enjoy the model.

Parts:
Angel
1 x Head
4 x Legs/Boots
2 x Torso’s
2 x Wings
1 x Drape

Succubus;
1 x Head
3 x Legs
2 x Torso’s
2 x Wings
1 x Right Arm
1 x Left Arm
1 x Tail

Base;
1 x Base

22 items in total.

PURCHASE OF THESE FILES DOES NOT ALLOW SELLING STL FILES OR MODELS MADE FROM THE FILES. . . DOWNLOAD IS FOR SINGLE BUYER USE ONLY

I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED

All parts are cut files to fit build plate of small resin printers like the Photon or have separate files than the FDM versions included.
These orientations work for FDM printing but you may find a better orientation that reduces support.
All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.

Why cut into many smaller parts I have been asked?
1. If you try and assemble this, then paint it . .it would be difficult to paint into hidden areas, less masking when painting separate parts.
2. Smaller parts not only allow for Resin print at full scale, but also allow individual parts to use less supports than one larger part on FDM printers
So now you know!
Please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed.
All of my models are only released when they can print! so please do not remix or "fix" faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print, make, enjoy.

3D PRINTING SETTINGS
Resin Printing;
Hollow 2.20 Raft 100%
Heads, Legs/Boots, Torso’s, Drape

DO NOT Hollow
Arms, Wings, Tail

FDM
Arm, Head, 0.12 80% fill speed 40
Rest at 0.16 30% fill, speed 50
See the Zip File for orientation of Wings!

ALWAYS dry assemble and “trim” parts prior gluing.
Look at the picture of how to assemble parts, so that you construct and paint separate before joining. I suggest painting ALL parts before assembly then “touch up as you glue each part, especially the legs.