Bearded Dragon Articulated Toy, Print-In-Place Body, Snap-Fit Head, Cute Flexi

If the images aren't loading, you can see some of them here: https://www.instagram.com/p/CgiGfHfP2bB/

I hope you enjoy my articulated Bearded Dragon lizard!  He's fun to fidget with and pose. Speaking of posing... I added a new mechanic to the front arms that locks them against the chest. This allows for really cute propped up poses! Give it a try!

Here's a short video showing how the arm locks work: https://youtu.be/QM0dozGDUOc

Please, share photos of your makes! I would love to see them!

PLEASE READ:
All MatMire Makes Designs are protected under Copyright Law.
Your purchase gives you the right to download and print the design for your personal use.  You do NOT have permission to resell or redistribute those digital files in ANY way.  This includes altered or "remixed" versions of the designs.  Prints of the design cannot be sold without authorization.

To legally sell PRINTS of my designs, you can obtain authorization by joining my Patreon page: https://www.patreon.com/matmire_makes

If you like this design, please checkout my Socials and give a follow. More designs are coming soon!

Includes 3 STL Files:
Recommended:
-Head with Pre-Supports: Supports are already built into the model. No need to generate them!
-Body with Custom Brim: Print-in-Place, Brim geo is built in so no need to generate one. No Supports needed.
Extras:
-Body: Print-In-Place. No Supports

Here is a quick video showing how to remove the Pre-Support and snap-fit the head onto the body (demo'd on the Leopard Gecko): https://youtu.be/IIBjZ6EOQGE

*Good bed adhesion is a must for successful printing. If you find you are having adhesion issues, use a brim/raft or use the model variants with the custom brims built in. If the custom brim shapes aren't showing up in your slice, try lowering your Initial/First Layer Height.

• 10-20% Infill.
• 3 Walls.

Scale to your liking! 100% creates a 10" model, so that will make it easy to scale it to your desired size. (80% = 8", 75% = 7.5", etc.) Depending on your printer tolerances, you should be able to print close to 60% before the joint function may start to become compromised. YMMV

**This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.*

Attention: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Not recommended for children under 3.

Check out my new design... The Tree Frog!

MatMire_Makes

Tree Frog, Articulated fidget, print-in-place body, snap-fit head, cute-flexi

• 5.9k views
• 62 likes
• 235 downloads
• 0 comments
• 5 makes

Download US$2.98