Get all my designs and a commercial license to sell prints: https://patreon.com/3DPrintyBoy?
👋 Hi everyone! This thread is public, so let’s keep it nice and respectful. No ads, spam or nasty stuff!
🇺🇸 User's country: United States
🌐 Member’s preferred language: English. You can translate online via DeepL.
💡 Are you referring to a particular model? Add the link, title or model number.
🖼️ Want to post photos? Use a free host like ImgBB and paste the links in the message.
✍️ Writing Tips: Use the Markdown format to structure your text and make it more readable.
Hi, I purchased your light bulb design for $3.99 but it doesn't print. All it does is make filament come out into no form at all. Would you please consider giving me a refund? I tried both the small and medium light bulbs.
Thanks,
Marsha
Increase the temperature, decrease speed
hallo der Sortierer fehlt in der Datei
I can not figure out how to open light saber without it breaking apart, any ideas or tricks
The boba fidget print is having a lot of trouble, any settings? any info at all?
Just purchased your Battery Butler XL and did not see the file for the lever. Am I doing something wrong?
On the Creeper- No AMS No Support, there are only 3 files included; eye 1, eye 2, and mouth. Where is the body?
Whoops, I must’ve forgotten to upload the main body. Sorry about that. I will get it uploaded once I am back at my computer.
After unpacking the package, it turned out that the inner_large file actually contains an element from the inner_small file. Is there a chance to fix this error? Thank you in advance.
Hi, so sorry for the delay! Could you please tell me which design you are referencing? It doesn't tell me here.
Cute Carrot Buddy Spiral Passthrough Fidget Toy for Easter
Okay, I just uploaded a zip folder that should have everything correct! Sorry about that! Let me know if there are still any issues :)
The same result, 2 files contains the same object the same size
I downloaded the Easter egg fidget. What filament type do you recommend? I have a lot of PETG, so I thought I'd try that.
Hi, thanks for supporting my work with your purchase! I have printed them in both PLA and PETG with good success! PETG can sometimes be a little more prone to stringing, and it doesn't bridge quite as well as pla, so I recommend printing a bit slower if you go with PETG!
Thanks, Neil. I wound up using PLA. The inside piece printed well, but the outside piece was stringy at the bottom, but after the first 1/2 in or so it was fine. I'm using the Flashforge Adventurer 5m. Any ideas how to fix it? I printed the large model.
This is not loading into my Anycubic slicer, please advise
Hi, sorry for the late reply!
If you are trying to load the .3mf file into anycubic slicer, it may not work because the 3mf file is created for Bambu Studio. Instead, you should be able to upload the stl files directly into Anycubic slicer individually. If you aren't confident doing this, please let me know, and I will try to create a 3mf file for anycubic slicer.
Also, please let me know which model you are referring to as it doesn't tell me here :)
Got the updated files! Thanks!
I am able to use the 3mf file for the large carrot inside. So no worries there. The stl is still small though.
Morgan
Hi, sorry about that! I will get it sorted out and I'll send out an update! Thanks for letting me know, and thanks for supporting my work with your purchase!
Hi! I purchased the Easter set. The Inside_large stl for the cute carrot is showing up in my slicer very small (14x14x35 roughly). I'd appreciate any advice for scaling it or a replacement stl.
Thanks!
Morgan
What kind of support does the carrot top need? Is there any special fill that works best? Also how did you get your models to look so smooth? I print the traffic cone and the outside piece printed rough on the edges. I am very new at 3D printing.
Hi, thanks for reaching out!
No support is needed for the carrot top! Just a brim is recommended.
I haven't done anything special to smooth out any of my models, just printed with pretty much the included Bambu Lab profile:)
- Which printer are you using? What print settings? What type of filament? Any of this information you can provide will help me with suggesting things to help improve the print quality.
Hi! I purchased the easter egg spiral passthrough STL, and the file named "medium inside" does not fit the medium outside - it's huge. Any chance I could get the correct file for the medium inside? Thanks!
Very fragile