Could you send me the file for your old 22 suppressor design
- 0 likes
👋 Hi everyone! This thread is public, so let’s keep it nice and respectful. No ads, spam or nasty stuff!
🇺🇦 User's country: Ukraine
🌐 Member’s preferred language: Russian. You can translate online via DeepL.
💡 Are you referring to a particular model? Add the link, title or model number.
🖼️ Want to post photos? Use a free host like ImgBB and paste the links in the message.
✍️ Writing Tips: Use the Markdown format to structure your text and make it more readable.
Write your message:
70 comments
який саме файл? фото? назва?
- 0 likes
I downloaded this in error, please refund!
- 0 likes
Hallo,
Ich möchte noch mehr Modelle vom Bergbau bei Dir kaufen.
Sie sehen richtig gut aus!
Toll!!!
Gruß Dirk
- 0 likes
дякую друже
- 0 likes
Ich habe Dir ein Angebot für Entwurfsnummer 713653 geschickt. ;)
- 0 likes
Sorry if someone has asked this before, but can I use carbine length AKs (314mm barrel) for this or does it require a full-length AK (415mm barrel). I understand CM040-spec AKs are the only real necessity, but I wanna be sure the muzzle is flush with the body like it is in the pictures.
TLDR: I dont know if the barrel length of CM-031B will get mine to look like yours in the pictures or interfere with stock.
- 0 likes
Я не знаю чи підійде. Довжина ствола може бути більша но не менша ніж в ак cyma040
- 0 likes
Thank you sir, stay safe.
- 0 likes
I was looking at your malyuk conversion and wondering if it would work with Andy gbbrs (that you know of) or if id just have to test
- 0 likes
Hi, I just bought your Malyuk kit. I'm planning to make it fit a GHK with a front charging handle so I'll be making modifications.
- 0 likes
+, show your result.
- 1 like
Will do thanks
- 0 likes
Hi,
Regarding your Malyuk Model, is it possible for you to make a GBBR Version of it, particularly for the VFC AK74M's
I have a VFC AK74M and I wanted to turn it into a Malyuk
So Please Let me know
Thanks
- 0 likes
Якщо ваш автомат має такі ж самі кріплення як і cyma 040 то дана модель підійде вам. В мене немає вашої модель автомата щоб перевірити або переробити під вашу модель.
- 0 likes
Hello! I wrote to you by email, but never received a response. There are suggestions for improving the Malyuk model
- 0 likes
Hey! Any chance the Malyuk kit will work for a gbbr ak? WE tech or GHK? Thanks!
- 0 likes
If the handguard and stock mounting are identical to those on the CYMA040, and the distances from the handguard mounting to the trigger and the pistol grip mounting are the same, then it will work.
But I can't give a 100% guarantee.
- 0 likes
Roger that, thanks!
Slava Ukraini!
- 0 likes
I'm wondering about a bulk purchase of your entire mining figures, I print for small model railroading projects.
Thanks
- 0 likes
Write to mykola.lop@gmail.com
- 0 likes
Thank you for posting this design. I am looking forward to trying it. Im having trouble printing the inner sections with or without support. I have a Bambu A1. Do you have any advise?
SILENCER SOUND MODERATOR UNEF 1/2x28 (.22LR)
https://cults3d.com/en/3d-model/various/silencer-sound-moderator-unef-1-2x28-22lr
- 0 likes
Зменшіть висоту слоя.
Додайте плотнішу підтримку.
Можете перевернути модель, верх ногами і так попробувати надрукувати.
З опорами воно має добре друкуватись.
- 0 likes
Hi, I have a question, how do you reload or unload this Malyuk magazine?, the normal AK style by using left thumb?
- 0 likes
Normal style. Use only mag for ak 74. Mag for 47 not use
- 1 like
У вас есть версия, у которой за спусковым крючком есть магазинный выпуск, как у настоящего Малюка? или это невозможно сделать?
- 0 likes
Нема, для того шоб зробити як в оригіналі, потрібно буде пиляти метал на автоматі. Конструктивно важко зробити
- 1 like
Вибачте за дурне питання, але чи може він знімати і працювати нормально? (стріляти bb)
- 0 likes
В мене працює і стріляє 6мм бб
- 0 likes
so the Malyuk work fine? ok thank you
- 0 likes
Model# 1295558 (Malyuk)
Hey! Printed everything out and I am now doing assembly. In the instructions there seems to be a lot of assumptions about screws and connecting the pieces. Some pieces seem to be fine with JB Weld, but some of the screws i have no idea what is needed. Do you have the specific screws needed so I can source them or are they all from the donor body? Thanks!
- 0 likes
all screws needed are standard m3 screws of various lengths and 1 m4 screw for the motor frame. you just need to choose the right length.
- 0 likes
buenas amigo una consulta tendra diseño de mineros en la actualidad?
- 0 likes
Не зрозумів запитання
- 0 likes
si tiene diseño de un Hombre minero con su traje de la actualidad
- 0 likes
mykola.lop@gmail.com
send foto
- 0 likes
hello can you make the miner statue holding the lamp and axe with a tshirt inside?
- 0 likes
Is there a guide or video on how to dissassemble the AK and how to rebuild it as malyuk? also does this work with specna arms 74 AEG?
- 0 likes
Can I please have the Hanged dictator stl for free I promise not to share it with anyone please -roberts.volks@gmail.com
- 0 likes
+
- 0 likes
Is there a hardware list for this print? Screws, springs, etc...
- 0 likes
you will need m3 bolts and nuts and one m4 bolt
Вибачте точної кількості не знаю.
М3 болти різної довжини.
М4 болт 1 шт
Пружина 1шт
В файлах є фотоінструкція
- 0 likes
Hi, what printer did you use for the malyuk?
- 0 likes
Ender 5
- 0 likes
Hi. Is a commercial license possible for some of the mine rescue guys?
- 0 likes
if we agree, it is possible, write to me at this address with your offer, conditions. mykola.lop@gmail.com
- 0 likes
Здравствуйте, очень жаль, что ваши фигурки такие большие по размеру, мне они нужны в масштабе 1/87, если я уменьшу такую фигуру, некоторые из них будут слишком тонкими, я бы хотел использовать их в своей модели железной дороги. , может быть, вы сможете сделать фигурки для 1/87
Спасибо Л. Г. Томасу.
- 0 likes
Яка саме фігурка цікавить?
Зі зменшеним розміром має справитись смоляний принтер. Вони в середині не пустотілі.
- 0 likes
In the images for the savage 64 release button it looks like you have a model for the savage 64 magazine itself. Can you give me a link to that model or email it to me?
Email address: xxandrewstanleyxx@gmail.com
Model number in reference: 968192
- 0 likes
hola, compre este minero pero no viene con la roca donde sale sentado, porfavor ayuda
- 0 likes
ви придбали модель шахтаря без скали (зоображення товару відповідає дійсному файлу)
з скалою це інший товар - https://cults3d.com/en/3d-model/art/miner-whith-shss-mykolalop
- 1 like
la idea no era gastar de mas, gracias
- 0 likes
Good morning
I bought this file but seem to print only the bottom part and then it starts looking like a spider web. Is there something I am missing or not doing?
- 0 likes
Якщо це fdm принтер то у вас забилось сопло.
Всі моделі протестовані і друкувались багато раз на fdm принтері та на resin принтері
- 0 likes
Hello,
How I am supposed to connect all the parts of your V3 suppressor?
you can partially glue them together (the threaded end and the central tube).
or you can just connect them together by pushing one into the other. it will all hold together well.
Кришку з кришкою треба з клеїти і все