I am an engineer by day and a part time 3D designer enthusiast by night. I mainly do table top minis, terrain, etc. but I have also done many other projects such as gun accessories and a few mech designs.
I'm flexible and easy to work with. So, if you don't like something you see then feel free to shoot me a message and I'll be happy to make any changes so that my design fit your needs :)
👋 Hi everyone! This thread is public, so let’s keep it nice and respectful. No ads, spam or nasty stuff!
🇺🇸 User's country: United States
🌐 Member’s preferred language: English. You can translate online via DeepL.
💡 Are you referring to a particular model? Add the link, title or model number.
🖼️ Want to post photos? Use a free host like ImgBB and paste the links in the message.
✍️ Writing Tips: Use the Markdown format to structure your text and make it more readable.
Hello, I've purchased nearly all of your mining equipment files over the past week (continuous miner, battery scoop, coal haulers, both roof bolters, feeder, and longwall miner). In the pictures you have some figurines of miners doing various activities. Are those some of your files as well? If so, could I get them and how much would they be? Thanks.
They've all been uploaded to cults now. Let me know if you have any questions
You do a custom design dice?
No, it's hard to print dice and keep them weighted properly. So, I haven't messed with custom dice any.
im a underground coal miner where did you get the figures of the miners for your bolter and continuous miner i would like to add them and print them for some fellow miners
I don't sell the digital files for those but you can order physical copies from my etsy: https://www.etsy.com/shop/ModularWorldsUS
Hello, Im Loving all your underground mining equipment. I am running into a small issue with the prints wondering if maybe you can help? let me start off by saying im new to the 3D printing world so it may just be something im doing incorrectly. anyways on my continuous miner in the front where the circular blades are it sometimes comes out looking a little wonky and every time there are these small pin holes im Using PLA filament my nozzle is .04
I did change a few of my print settings this time around I did have it slow down on the last layer which helped some. but I still have these small visible pin holes. could you by chance tell me how you exactly printed yours? did you use a smaller nozzle? ( I also recently printed the feeder) and I have a ton of small holes in the front. hoping you can help. thanks so much for sharing your awesome designs.
would you possibly be able to bundle all of your mining equipment at a discount i would like to purchase it all
Hello! If you message me on facebook: @3demporium or etsy: ModularWorldsUS or instagram: mrhers2 then we can work out a deal and I can send you a link to download them. Cults already takes out a large cut of every sale so if I discount them on here I won't be making hardly anything.
this person displays your model on another site
https://cults3d.com/en/users/lessonswithrex/downloads
https://cults3d.com/en/3d-model/art/continuous-miner
https://www.crealitycloud.com/model-detail/63a123aaff02ea85f600e95b
My friend can you discount for Supportless Longwall Shear .By the way you are great
Thank you, I appreciate your praise. Unfortunately I have already priced my designs at a fairly low price point and cannot discount them any more than they already are.
i was wondering if you have the little miner man figurine as well
I only sell the physical prints of those on my etsy page: https://www.etsy.com/listing/1539523129/underground-mining-machinery-set-1
Hi there.
I was just wanting to inquire about your Book of the Dead box. I saw that there were stipulations about it being used for commercial purposes. Which is totally cool of course! Was just wondering, if I were to print the boxes and have them be the display box for an item that I sell) always including full credit to you for the box) but the Book of the Dead box would be free, would that also be counted as commercial? Just wanted to ask. Thanks!
go for it thumbs up
Thanks so much! Always like to ask just incase. I'm making Key of Hamunaptra necklaces to sell in my shop, so this will be the perfect display box for each necklace.
Is the pan line suppose to be included with the longwall shear and shield?
Hi! Is there any way you can alter the size of the belle book dice box to fit a MTG commander deck? i have a friend that LOVES beauty and the beast and id like to gift it to her!
Give me the dimensions you're needing to fit in there and I'll see what I can do
77mmx97mmx75mm thank you!!!
Just uploaded the new files for it. All of the files beginning with MTG BB are made to print supportless so it should be an easy print. Let me know if you have any issues with it.
https://cults3d.com/en/3d-model/game/belle-book-dice-box
Any tips for printer settings for your taser model?
Hi, any chance to get the lower arm part for the biscuit belly warrior? Seems to be missing in the collection even thoug in your example pic they were available? Tahnks in advance!
Is the file for the continuous miner scalable in other programs? I'm wanting to print out a 1:24 scale model
As long as you apply the same scale to all the parts it should be fine. I've printed it at twice the size and at half the size without any issue. The model is 7.5" long so if you give me the size of the real life machine I can give the scale factor to apply to get you to 1:24
my printer is 300mm x 300mm x 400 mm
wow that a big printer, fdm is it, models easily resized in slicer, i work with this type of machine and the main body about shoulder height so as a man in 1/24 is about 3" then for this machine in 1/24 then height from bottom of track to top of main body would be about 2.5" and all sizes kept to that %, might need bit of fine tuning in % settings of slicer if important for exact 1/24 size, i resize various models in slicer regular so resizing easy enough
also am looking at your longwall shearer model, the cutting drum picks look a little too big and not enough of them, i reckon should be more but smaller picks and slightly angled as i already have one shearer model from cg trader where picks are smaller and angled so look more realistic, your roof supports and panzer pans look good tho but at this time not am ready to add to my collection
Hello! It seems I over looked uploading the latest continuos miner. I'll upload the new model tomorrow morning. As far as the long wall goes... I was designing that off a few pictures someone sent me for the model they run. He seemed happy with the final product so I took his word that it was accurate enough. I can take a look at it this week though and do a little research.
did try putting a shearer photo on your facebook site but seems as if being ejected
hello have noticed you have new photo for your continuous miner where it includes gathering arm starwheels, is this a new version that likely to be available some time soon ?, also have noticed some miner figures in the photo are these your work and you going to make them available anytime soon or are they sourced elsewhere ?
My etsy account is ModularWorldsUS. I don't normally ship overseas but if you point them to my facebook business page 3dEmporium and tell them to message me then I'd be happy to work with them and see if it would be worth the extra shipping cost.
Also, do you provide the option to grant a commercial license?
What area of the world are you in?
USA, West Virginia
If you want to sell them locally be my guest. I just ask no internet sales since I sell them through my etsy account. Give me a few days and I'll see if I can alter the miner for you.
Thank you! I don't have an online business and would be local only.
hello again where/what is your etsy account as have tried search on etsy and not finding any continuous miners or other mining machines on there as couple of people on uk mining sites that i'm on have asked if i could do a machine for them that i declined as too busy with various other stuff for myself or for couple of miners at the mine where i work, if i knew where you selling i could point them in your direction
thats facebook sites for uk mining and wales mining
Hello. I love the continuous miner design you did! I was wondering if it is possible to update, or tell me how to modify the boom on the back to include the nipple design so that it is movalbe? Thanks!
Are you wanting it to be able to move like in this picture? https://ibb.co/zRKw5pT
Yes, that is correct.
Or at least vertically moving.
Hello! I'll be test printing the new miner tonight. I'll send you a picture tomorrow when it's all together
https://ibb.co/QXhxvCH
https://ibb.co/px4HYDZ
see how this looks, i made it to where the tail can rotate and there's a small flap that folds down to lock it into an up position and fold back down if you don't want the tail in the air.
Love your stuff, quick question, for the dwarven air ship, you print using filament or resin??
Hi and thank you! I printed that with filament on my creality CR-10s
Hello,
Any chance you have the other bases for the mousetrap expansion? seems to be missing base 1 and 2.
I never did those since I had the base game and didn't need to redesign them. I'd be happy to design them for you, though. I charge a $15 design fee for stuff like this if you're interested.
Was hoping to get the file for the roof bolter my father in law worked the mind down here in Whitwell, TN and my wife and I are working on making the models of all the equipment what all coal mining stl do you have
Found out people were selling my models without my permission so I took them down for a bit. You can find the roof bolter here: https://cults3d.com/en/3d-model/art/underground-roof-bolter
Absolutely love your Dwarven Airship! Especially like the attention to detail in the weapon rack 😂but seriously great print!
Hi,
Really enjoyed the model of the shuttle car you have previously posted. I Have already printed the continuous miner. Would you be able to send it to me please as I have noticed it has disappeared from the website? I work on these machines as an engineer for a day job and would appreciate it for my desk. Thanks
Cults screwed me over by porting my files from thingiverse as a basic license instead of the default non-commercial license like they said they would and I didn't catch it in time. I found out someone at a mine down the road was selling my prints without my permission so I took everything down until I could sort it out. You can purchase the file here:
https://cults3d.com/en/3d-model/art/supportless-underground-hauler
Sorry for any inconveniences
Hi, great designs you are making. Can you make this book?
https://ibb.co/DDJr8jD
https://ibb.co/1dw5x9z
Are you wanting it just as a solid prop? or are you wanting it to be a variation for my secret lock book?
Like the secret book would be really great.
Not sure when it'll show up on Cults but you can find it on my thingiverse now https://www.thingiverse.com/thing:4795081
just grab the Knife Compass Center and you should be good to go
Wow. Thank you very much.
How can I get in touch with you on commissioning a print ? I want I’m looking to make heroscape tiles with terrain on them like buildings and sci-fi stuff scaled for battletech
you can reach me on facebook messenger on my business page @3dEmporium