112 comments

Regarding "camper body for pickups 1:24 scale" I understand that I will be able to scale it up to fit my 1:10 scale RC, can you send me the measurements of the camper, length, width, heights of the basic camper? I plan on putting it in a 1:10 scale Axial gladiator, and will need to do some major modifications for it to fit especially since it is a very short bed. I just want to be sure it can be modified to fit my needs. Would I be able to remove most of the bottom (my bed is not flat, lots of obstructions).

hey thanks thats not expected but would be great to have that grapple, alewis.1683@gmail.com

Hello I purchased you case 1845 skid loader file and was wondering if you would sell your grapple file separately as well as design a set of pallet forks to sell?

Hello-I belong to many modeling groups on Facebook where fellow modelers share tips and tricks as well as sell and trade parts. I have been offering some of my printed 3d designs to group members to help them build better models. I have been asked by a lot of fellow models for items such as you are offering. I would like to know if I can have your permission to advertise your models in these facebook groups and provide the printed models to them and I will only charge them for my time and material. I will ensure to never share any of your files with anyone and I will purchase your files for every order placed even if I have already purchased it. I hope to increase your sales by offering them to our modelers.

Hi Claus. Been working thru printing the skidder files. The files are in 1/24 scale ready to print? It going to be a huge model when put together. WOW. Thanks Doug

Hello Claus! I would like to purchase your Mattracks file and scale it up for 1/12 and 1/10 scale vehicles. I'm asking for your permission to sell completed prints. I am the owner of www.redatlascreations.com. Thank you for your consideration.

Good day claus. I am installing several of you pieces on a railroad service truck. I’m wondering if you have any guidance on where to run the hydraulics on your heavier crane. The one pic of the finished ford is helpful but doesn’t show all. Thanks

Hi. No Instagram. Please email pictures doug1966@shaw.ca. thanks

Hi. Just downloaded the files for your Timbercat Skidder. Awesome job, I'm in BC Canada some am very familiar with these. A few questions, I saw you posted about the wheel options , chains or no chains. If I'm printing w/chains what is the best position for the tire , upright? Laying down on side? or at an angle ? All with stand off supports of course. Thanks Doug. Hope you do more forestry equipment.

Good day Claus. I love your designs and a few of them are showing up on a few builds right now I am wondering if I can get the dimensions for the enpak generator/ compressor in 1/24. Thanks

Hi, the Tigercat 635e skidder download only came with 1/24 scale, could I get it in 1/87 without chains and tracks please?

I just downloaded your super swamper bead lock tire and wheel files. Your file Badlock_Mud_Bog_Außen does not show up on my Chitubox slicing program for some reason? The tire and bead lock ring do show up. Please check your file or let me know how to get the rim to slice and print. Thank you Ed

Argo Conquest Pro 950 XTX in 1/24 scale, can I ask the dimentions of this model in 1/24 please, I am considering it as part of a load on a 1/24 truck just need to check if it will fit. Thank you.

i bought the service bed with crane but i dont see the file for the smaller scale with everything combined

Does the GMC step van body print as on piece and in multiple pieces?

Hello. Just curious on the 445 steer tires, is there supposed to be a center hub file with it, it's hard to attach them to the truck

Hello good morning, I am interested in the model Mattracks M3 for ATVs in 1/24 scale. I want to ask if the model is with supports? thank you so much

Hi, I just bought the 635E grapple Skidder files in 1:24. I will have to convert them for my layout to 1:87, which will not pose too much of a problem unles there are too many too small parts. I am confident I will find a way and a good work around. But actually, what I am missing is some kind of manual and a list of parts just to see, which parts needed to be printed in bulk rather then as single pieces. Do you have such files? It would be highly appreciated, if you would let me have access to them. Thank you so far for your cooperation and this nice and meticulously detailed model. Looking forward hearing from you soon. With best regards, George, Aichwald/Stuttgart, Germany.

Okay, thank you very much for getting back to me.That will help me out a lot

do you happen to have these files in 1:14 scale

Good morning. do you have any of your files in 1/64th scale? if so what mm setting would you suggest or percentage of the 1/24th scale that is in your file. reason being i have difficulty in resizing. thank Matt

Hi. I just downloaded the Case 1845c. It looks awsome! Unfortunatly , I can`t find the files for the grapple bucket.

and the barrel is way to large for the plate. false advertising

hi some of these are missing handles.

love the UT bodies. i want to print all in one part. but the slam latch are free floating not attached to the body. i tried to import the stl to see if i can fix it. but the programs is freezing up when i try to work on it. sketchup and blender any chance you can fix that?