👋 Hi everyone! This thread is public, so let’s keep it nice and respectful. No ads, spam or nasty stuff!
🇩🇴 User's country: Dominican Republic
🌐 Member’s preferred language: English. You can translate online via DeepL.
💡 Are you referring to a particular model? Add the link, title or model number.
🖼️ Want to post photos? Use a free host like ImgBB and paste the links in the message.
✍️ Writing Tips: Use the Markdown format to structure your text and make it more readable.
Hola, el día de ayer compré la máscara de Spantom (Número de diseño 565221) y tengo problemas para poner las bandas elásticas y es muy probable que yo las esté ubicando de forma errónea. Tienes algún esquema o imagen que muestre la forma correcta de colocar las bandas elásticas?. Me ocurre que al abrir la boca, la mandíbula se mueve y queda fuera de posición. a modo de comentario, la impresión se realizó en una bambulab P1S y no fue modificada su escala.
Mis disculpas por responder tan tarde. Lamentablemente estoy fuera del pais y no tengo la mascara conmigo a mano, pero estoy deacuerdo contigo de que la manera que funciona es inestable asi que tengo planes de actualizar el diseno para que funcione mejor antes de que termine el año.
My son would like to print the Spamton Neo Helmet for his Halloween costume. I was reviewing the size and it looks like it’s around 7” which doesn’t seem quite large enough for a teen head. Has anyone printed this and been able to wear it?
DESIGN NUMBER 600071
sorry to answer so late , for some reason cults takes a couple of hour to notify me of any private messages, sorry for the inconvenience, my 3dprinter was broken when I designed it. I,ll fix the problem right now and try to reupload the model before tomorrow and ill send you a reply letting you know. Also I can try to do any other adjustment that you might want to do.
I uploaded a new version now, check it out and let me know if it need any changes.
Hi there, I bought the Ashe Bow and after printing realized that the last two parts of the bow are missing dowel holes? do you happen to have the last two parts with aligned dowel holes? 6Ashe is missing the bottom dowel holes and 7Ashe is missing the top dowel holes. apart from that - everything else is awesome!
sorry for taking long
I'm going to check the files again and try to fix the files tonight. Sorry for the inconvenience.
do you prefer me to make holes bigger or any other changes?
also did you already print all the other parts?
just asking so I can fix it faster.
sorry - been away for a while for work - I already printed out the other 5 parts and got the dowels for them - so they're all good :) just need the holes in the last two pieces sorted and it'll be all good :) thank you!
Hi there :) just checking on the progress of the re-up? thanks :)
sorry but for some reason , cults dint alert me about your last message, ill begin working right now, hopefully ill finish before Friday. I just hope you don't have problems resizing the new parts with the old ones.
I think its done, ill upload it tonight, let me know of any issues.
And If you need any prop to be made let me know ill be happy to make it for cheap.
Its up.
Question about design #591165 [ https://cults3d.com/en/3d-model/various/shy-guy-mask-hellmasterx ]
I had my friend take a look at it for me as he knows a lot more about this than I do and he's the one with the printer. But he noticed that the eye holes may start just a litte too high up to be able to easily see out of. We're doing a Mario Tennis group cosplay. Is there any way for the eyes to potentially be moved down just a little bit for more visibility?
Hi I bought the spampton mask, I am having trouble slicing the jaw using UltiMaker Cuda 5.4.0, my printer is a Anycubic Kobra Neo any chance you can help with that?
sorry for answering, late, could you send a screenshot of the jaw on the slicer?
weird , ill check it out in my end as soon as i get home, did you try rotating it or in snother position?
Sorry this is my 1st 3d print :) i bought the printer just to print this for my daughter for haloween. Rotating it did the trick weird but good to know for next time i have a issue. Thank you so much.
sure, no problem but i think theres a problem with the cura software because im having the same problem too now, ill try to fix it asap, thanks for letting me know.
Bought the spamton mask for my nephew. Your pics show color in the glasses lenses. Am i not able to do this. Im slicing in Bambu with X1C. Also how do i put this together. Please reply. TY
The model comes like this because otherwise the person would not be able to see well, you could edit the model so that the lenses are solid but I suggest using some colored foil on the lenses. For the other question use rubber bands for the jaw.
Thanks for replying
The clav on the jaw came off when removing the supports. A couple went flying and i lost them. Can i just reprint the clav and superglue these to the jaw? Also can you send me a pic of how the rubberbands are connected? Everything else looks pretty good.
Hi, I downloaded the Captain Falcon shin guard and edited files below but the buttons on the sides are weird. They are jutting out at an angle instead of lying flat on the surface. And some of them have been flattened into print making them hardly visible. Can you re-edit these?
sure , could you please send me screenshots of the part that have the problems and how it should be if can?
ty very much let me work on it
https://ibb.co/C68GQR5 better?
Wow, yes that is better. Thank you
as soon as i get home ill send you the new file.
please give me an email address to send you the file privately.
hola, cuanto tarda en imprimir esta mascara?
uffff mucho tiempo como un dia y medio
hi, i was just wondering what the size my printer need to be to print the captain falcon helmet in the 7 parts?
440 x 440 x 465 mm
mines an Ender 3
Bonjour, serait il possible d avoir le fichier du casque du diable non verrouillé afin de pouvoir le proportionner correctement. Par avance merci
Hey, I downloaded your captain falcon cosplay parts file and tried printing some it out, but noticed some problems. the design on the shin guards of the model are partially floating and not connected to the rest of the model as well as the circular buttons are doing the same thing on top of some being concave and convex. Is it possible to re-edit?
https://drive.google.com/file/d/1SdIfqUm2EuEPW3Oss7YmALgIywnhzvcd/view?usp=sharing let me know if it works for you.
Hi. I've just bought your Green goblin bomb but when I try and open it in Cura it crashes. Do you have any other versions of the files?
i updated the files, i think it was file size. let me know if it works for you, also try to print it on its back because teeth are rather fragile if you use supports and try to remove them.
Yes that's worked! Thank you very much. I can't wait to print it.
Hi my dad just printed the spamton mask with the moveable mouth... and we are confused on how the rubber bands are putted in the mask, my dad printed it at a smaller size (97%). maybe that's the problem
Hello there, I bought and printed out your design of the spamton mask. It turned out great but I'm confused on how the rubber bands attach. It's possible I made my mask too large and that's why but I wanted to check how you attached the rubber bands
ill send you a foto when i get home.
the jaw isn't slicing with Cura. We have a Anycubic Kobra Max for printing.
https://drive.google.com/file/d/1LXztg_b4scv9vwUFL6EDgzP0BCnu3mYW/view?usp=sharing heres the gcode, i dont have anyway to test it since i don't have that printer.
i used this guide to set the cura profile. https://www.youtube.com/watch?v=37AajqIXLoE
https://drive.google.com/drive/u/0/folders/1tDJJEpqfpxNQIhlPRniotGCP-7FuZOVQ
let me know if it works.
Thank you. I'll let you know.
hello, we just purchased spamtom. We need it in a gcode format for our printer. Can you help me with that?
sure, ill try to help you with that, any special settings you use? default size?
Thanks. We got the gcodes for everything but the jaw. For some reason we are getting an error for the slicing with Cura for the jaw. We are using the default size. Its our first time using the printer (Anycubic Kobra Max) so we're not sure about any settings. Any advice would be appreciated. Thank you!
Hello I am printing the spamton mask on an Ender 3 v2 printer. Part of the left check is being cut off, this happened when I printed the glasses also. not sure if I am doing something wrong, is there a fix for that.
sure let me get home to check the file and investigate the problem. ill send you a link with the update asap.
could you please send me a pic of the slicer to see where exactly the error is, i checked both the print and the stl and i cant find the issue , send me you slicer settings also if can,
you can also try using the print the thin walls options.
https://ibb.co/Btkzmw0
https://ibb.co/YWMHGkR
https://ibb.co/mvWPF0X
I have these photos. I’ll up load the slicer photos tomorrow morning.
also check the gcode you used to see if it has the same problem.
Hi, I just bought your Spamton mask. How many Clavo do need to print? Also, where does the Clavo attach to??
ill send you pics once i get home later today
What is the size of each individual part?
its pretty big you migh have to split it. for example i have an ender 3 and i had to cut it in different parts
I'm surprised that this mask Isn't free like it should be, I mean you may have made the 3d model but then again you don't own the character, It is actually quite illegal to make profit off of someone else's content without permission.
Hello! I love your work. Do you have a version of the pink Castle Crasher helmet where the eyes are inverted? Trying to get a couples costume together but she wont go unless she's cute and not angry.
ill do my best to help you with that, but im gonna need some time, hurricane Fiona probably is gonna knock the power out for some time in my area but as soon as i can ill work on it. How soonish do you need it?
also can you send me a reference foto?
Mid October if possible (so I can sand and paint). See the reference link below. If you have Venmo I'd be happy to pay you for your trouble
https://static.wikia.nocookie.net/castlecrashers/images/7/7d/31.png/revision/latest?cb=20190329153657
its gonna be ready by today or tomorrow.
give me you email to send it over.
Hi bro, I am about to buy the captain falcon helmet, but I see that it is a single piece, you could cut it for a small 220mm printer and separate the eagle from the model, since in my experience it will be a headache to get it to print well
working on it
ok, its done , let me know if youre still interested, i divided it into 6 pieces plus the eagle.
sorry to bother you again but how many volts and hangers do i need to print to put mask together
Thank you so much this helped out alot :)
it's probably a little late but better late than never.
You have any instructions on how to add the rubber bands and the velcro straps to this spamton mask? It's a little Annoying getting the rubber bands to stay in place, And was wondering if I should just tie some velcro straps to the Mask Part. To hold it onto your face
Yeah you could try that, use an elastic band , and try to use crazy glue and some eva foam on top of it for extra strength . I do agree that the design needs improvements. I plan to update how the mouth slides to fix the issue. Right now I'm in college so I plan to hopefully work on it and release the update during the winter break.