22 comments

Hello, were the dimensions taken on an original tool? Could you send it to me, it may be a problem with the scale of the drawing or its transcription?

Hello, I downloaded and printed the two tools but it does not work. The one from bench 1 to 4 has slots that are too big and do not fit into the slot of the camshafts and the diameter of the fixing holes is too large, the holes do not fall in front of the threads. On the tool from bench 5 to 8 the pins are too wide to fit into the slot of the camshaft and the well where they are is too deep so that the pins do not touch the camshaft. The tools do not work I would like to be reimbursed thank you

I've printed the k1 extruder mod,but the metal backing won't pegs are too big for all of the holes. It feels like it will break, but it won't slide on like I would expect it too. Any suggestions on the print?

Hello, I am having issues with your K1 extruder mod. None of the holes are aligning. Please refund.

Have you tested the QAV light ducts? Do they cause any issues? Did the flight change from the regular full ducts?

HI friend possible to have the model without the K1? Thank you

Hello, I bought your model, it is very good, just one question, what orientation do you recommend to print the stl?

Hello, I want to buy your 3d model from Russia, you can contact me via telegram/whatsapp
89639767667
@BarmenTG

Здравствуйте, я из России хочу преобрести вашу 3d модель, можете связаться со мной через телеграмм/whatsapp
89639767667
@BarmenTG

Hello, firend)
I try to find full go pro tpu mount for protek r25. And your version all that i can find.
Could you it again to download

Hello, do you think that the upgrade for direct extruder could work even on Anycubic mega X ? or not ?

Hola, yo también compré el diseño y lo monté, pero no me llega el cable para el motor, me puedes decir que hicístes? gracias.

Buenos dias amigo compre el archivo pero como cambio la rotacion del motor ya q en ves de empujar lo saca

Thank you for your rendering so nice love the profile do you have the necessary wiring instructions to make this happen. would love to support you and purchase the stl .I just have 0 idea what's required to hook it up.

for which frame?

Hello, do you have the landing pad ? thank's

Hello, do you have the landing pad ? thank's

Regarding the runcam5 mount for flywoo mr. croc frame
is this also for the HD version of that frame ?

thanks

The long version of the caddx vista antenna mount is not well designed. The tube is only one layer thin and they are breaking. The Short version is ok with 3 layers.

I purchased your GoPro Hero 9 protective case yesterday, I'm disappointed in the design of the "fingers" of the action mount, they are almost 1mm thicker than they should be and don't fit into any standard GoPro mount. Are you able to revise it and send it to me or provide the CAD file so I can revise it myself to re-print?
Thanks,
Ryan

Telegram me pls @grblmm for detail photos

https://www.instagram.com/p/B9PtQ4eH44X/?igshid=18yqrbh4ktnmw

Hi i download the stl but the rapidfire does not fit inside the Goggles.Can you explain how put the rapidfire?