Hello, a few months ago you had the STL file for the VESSEL shoulder pad, but I can't find it anymore. Do you still have it?
Thank you, have a good day!
- 0 likes
Welcome message from eekseye
👋 Hi everyone! This thread is public, so let’s keep it nice and respectful. No ads, spam or nasty stuff!
🇬🇪 User's country: Georgia
🌐 Member’s preferred language: English. You can translate online via DeepL.
💡 Are you referring to a particular model? Add the link, title or model number.
🖼️ Want to post photos? Use a free host like ImgBB and paste the links in the message.
✍️ Writing Tips: Use the Markdown format to structure your text and make it more readable.
Write your message:
185 comments
Hi. I was wondering if you had ST STL mask file available for purchase?
- 0 likes
do u have the longer mask vessel alkaline video? i had a file on pc but harddrive died now i cant find one
- 0 likes
Nope
- 0 likes
hola, compre el diseño Skeleta Bone Grucifix, Ghost Papa V Perpetua, pero no me deja descargar el primer archivo BoneGrucifix.zip 135 MB, podrias mandarme otro link de descarga?
- 0 likes
Probably something wrong with cults, please try later or contact me again on instagram. Link in profile
- 0 likes
hi im new to 3d printing i was just wondering do you know if your mask and shoulder piece with print on my Ankermake M5C. and are these STL files or for blender
- 0 likes
These are stl. Masks are fine but shoulder might not fit
- 0 likes
Hi, i’m interested in Corey Taylor’s mask but I would like to know the exact measurements before buying it.
- 0 likes
Hi! They are mentioned in description. Mask dimensions are 200*280mm
- 0 likes
Hi i wanted to know if you make the Will McDaniel's Mr.Crustmas because i've been searching all over gods green earth for 3d models of the things he's made and was wondering if you can make something for me i can pay but roughly 25-30 bucks if thats okay
- 0 likes
I don't get the question, sorry. I made Mr.Crustmus fridge magnet, you can grab it for open price in my profile, if you need something else please message me on instagram, link in profile
- 0 likes
All good I was wondering if you could make one of his little creations he made a tutorial on how to make it with the liquid latex but I can’t quite replicate it and I was hoping you were up to the challenge to make the hermster that he made and if not totally reasonable
- 0 likes
Send me pics
- 0 likes
ok
- 0 likes
wait on what website?
- 0 likes
or app because i cant send them through here unless you have like a discord?
- 0 likes
can i send you the video of him making it and you can skip to when it is started to be made. that would make it a bit easier on your part. its at roughly 11 minutes
- 0 likes
and if you dont mind id prefer it without the fur which is just basically like the whole thing without fur
- 0 likes
If you’ve started how is it coming along
- 0 likes
Looking for the vessel mask, don’t see it anymore, is there anywhere else I can download from you?
- 0 likes
Hi, I ordered a mask on an Etsy store and its got your logo on the back. Just checking if you were affiliated with them?
https://www.etsy.com/uk/shop/GhostShopOG
- 0 likes
Hi! Thank you! No, I don't have any trusted sellers for physical items and I don't receive any fees from them (
- 0 likes
Did you know some of your designs are being sold by an Etsy store that doesn't seem affiliated with you? And at a significant markup too: https://www.etsy.com/ca/listing/1796056622/cult-of-the-tree-mask-alan-wake-2-stl
- 0 likes
It's my pal, everything OK, thank you )
- 0 likes
i missed out on the espera mask. do u think it will become available again any time soon? please!
- 1 like
No, sorry
- 0 likes
Finally got my new printer and your mask came out PERFECT. I think you have the best design out there for this and I love that the filigree at the bottom is separated so we can get a reasonable size out of the mask itself. Just wanted to say thanks and it was worth every penny.
- 0 likes
Thank you so much! Always trying my best )
- 0 likes
What happened to your Sleep Token Model? Someone saw the mask I made and wanted to buy the file to make it themselves, but the file has been taken down.
- 0 likes
Hi! I love the Jerry/Vessel/plague doctor mask and have it painted up real nice for printing. In the course of printing it you do spend a lot of time looking at the minor details and I notice that the stl doesn't follow the render exactly, specifically around the left side of the beak where the rune logo terminates. On the right side, it has a clean biased cut but on the left, it stops at the gold detail. It's so minor, probably no one will notice, but if you decide to do a reissue, I'll be first in line!
- 0 likes
*in the course of painting
- 0 likes
It was made as a joke, no updates planned, sorry )
- 0 likes
Fair enough. Joke or no, love it for combining plague doctor and ST!
- 0 likes
Just bought a bunch of sleep token files from your kofi! But I didnt see the red and white shoulder piece. Are you gonna be making that soon?
- 0 likes
I never made one and most likely won't
- 0 likes
hello I'm new to mask making and was wondering if you allowed making small adjustments when i purchase them or make custom designs on them like for example the CRO inspired Tru mask and do you also allow me to post content with the masks for cosplay usage? it's my first time to 3d modeling so I'm nervous on asking these types of questions also do u know how I can measure faces to make sure it fits? I can't wait to purchase these ghost band masks! i am really excited! thank u so much for making these files!
- 0 likes
Always welcome for customization, just don't sell the results ) You can tag me on insta. My link in profile
- 0 likes
I advise you to print cosplay calipers for more accurate measurements before printing the mask
- 0 likes
Do u have any other social medias and how would I print Calipers?
- 0 likes
I bought the Perpetua Bolo Tie model. Do you think it will need supports when printing?
I already bought another model from you and I love them. Best regards :D
- 0 likes
Hi! Thank you! Supports are required but just few of them to support the rear arc
- 1 like
Perfect, thanks for the answer 👐🏼
- 0 likes
Hey, I just bought the corey taylor slipknot mask, I'm making it for a freind, I'm just wondering (as I'm quite new to scaling masks) if the file as it comes is a general fit? I have scanned the persons head who it's for but the mask seems a lot bigger so far haha. Thank you!
- 0 likes
Hi! I try to make all my masks to fit an average adult head as default, but of course every time is a game of guessing. That's great you have a scan, but I also advise you to print cosplay calipers for more accurate measurements before printing the mask
- 1 like
Hi, yeah I printed those too I guess im just a tad unsure of myself, I have his head measured at
(Width) 170mm
(Depth) 200mm
(Height) 230mm
But going off of this I have it looking ok at 90%, I’ve had so many failed masks up to now I’m just trying to make sure I’m there or thereabouts haha, I’m planning to print the helm file and then the jaw
- 0 likes
I know you didn't ask me, but my go-to for sizing is to print about an inch-wide band of the mask/helmet around the eyes and use that to gauge the fit, I find it works well and eliminates a lot of guesswork for not much filament.
- 2 likes
Hey, all help is welcome so thank you, I think I’m going to try that in future, I tried using the scan and measurements but the scan looked very small so I scaled down to 95% but I’ve printed the back and front and it does fit but it is snug, I should have just printed at 100% lol. In future I think I will do what’s you have suggested.
The mask however does slope in at the bottom so I’m wondering how that would be navigated, thanks all the same!
- 1 like
Why did the Sleep Token stuff get moved and blurred? copyright issues?
- 0 likes
I was just looking at your sleep token shoulder and its not gone. are you going to re ad? or where can i get it
- 0 likes
Hi, I was looking for the new ST skull mask.
How do I obtain the file?
Thank you 😊
- 0 likes
Hello. I'm interested in buying the print file for the Borlan skull. First off, I've never 3d printed, have zero idea about the jargon involved and will have this printed by someone else with 3d printing knowledge. Just so you know I'm a complete noob with this... that being said, is there a another file available or can you edit or alter the file to both remove the raised floral pattern as well as the squared part on top of the skull for the headpiece? Edit it off so it's just a smooth normal top of the skull? This is for personal use for my position at a haunted house. Thanks for your time.
- 0 likes
Hi! I'll check if I have early stages saved before the pattern applied )
- 1 like
Great. Thank you
- 0 likes
I prepared the files and attaching an archive without top piece and without the pattern id addition to existing files
- 0 likes
Awesome. You are a Rockstar!!! Thank you thank you 😊 I've never done this before so what's the next step? I just ordered the file and add a note to the order that I'm the individual who requested the updated file??
- 0 likes
Nothing special, simply download it and chose "no_pattern" archive, that's what you need. And of course you can also download the original one with pattern and other features. All included to the price )
- 0 likes
Great! Thank you so much! When I take this to a printer, is there anything specific I need to tell them or if they're familiar with 3d printing, everything should be self explanatory? Sorry for all the questions.
- 0 likes
The scale fits average adult head as default, most likely requires no further scaling. As for the rest it depents on their printers setup, leave it to them
- 0 likes
Thank you. Will purchase shortly. Thanks for your time answering my questions.
- 0 likes
New Sleep Token Vessel Pauldron - Do you think there is any way to print this on a 256x256 plate? How do you connect the pieces? Also, approximately how much filament does it take to make it?
- 0 likes
Also, how do you recommend adding straps to wear it?
- 0 likes
Yes, I was making it having this exact printing bed size in mind. As for filament I believe I have already answered someone about it, can't remind the numbers but it was less than one slpool (with 3 wassl and 20% infill). To assemble there are matching holes on each piece, just pull the lacing through them and tie a knot from the inside. The same for the straps, use the holes for assembling and additional holes on both sides to attach the straps
- 0 likes
Good evening!! I just wanted to thank you for the amazing STL files for Vessel's mask and pauldron. I was curious if you would be able to update the Gems to have faceted edge that are crystal like so that they match up with the actual gems on his pauldron. The pearls are perfect as spheres. The other 3 pieces have faceted edges on them after looking at high resolution images of his costume. I've completed the mask with paint and gold leafing. Now I'm working on painting the pauldron pieces. I was hoping you could look into the gems for everyone! Thank you so much! :D
- 0 likes
Hi! Please send me the pictures to instagram. Link in profile
- 0 likes
Do you think there is any way to print this on a 256x256 plate? How do you connect the pieces? Also, approximately how much filament does it take to make it? What type of straps will you attach to wear it and how?
- 0 likes
Hello, I love your design(Harley Quinn shibari, anime girl shibari figurine, girl with ponytails). I was curious if, after purchasing the STL file from you, we can sell the product? I've been using other files and doing some tedious shibari with hemp cord on them. I was curious if we're able to sell it, or if there will be any licensing issues with you? Please let me know. Thanks!