36 comments

Yeah that’s fine

As part of our agreement above, do I have your permission to display your images in the modeling groups I belong to in Facebook and print them for our fellow modelers who do not have access to a printer but want your model for their build?

I’m not honestly sure , I have a mini lmt and I never tried putting them on there . I made them and printed them to use them on a 1/24 monster truck model

Fixed! Downloaded on a PC instead of a Mac fixed it.

I just made it as close to 1/24 as I could based on full size measurements . I haven’t personally printed it myself . I made two files one with the door open and one with it closed . I didn’t make it where the door would be functional

I’ve printed multiples of that file and my slicer never said that and your the first person with that problem so idk what’s going on

I’ve printed multiples of that with no issues , you may have to manually add supports in .

If you click the downloads tab all your purchases are there and you can redownload the file

Adjust dimensions in your slicer to what you require . I don’t have full scale parts to get measurements from . I use most of the files I’ve made for 1/24 scale models of my own . And most require sizing to correct dimensions needed for each model

I made one I haven’t personally printed it though

all files are fixe and updated. Thanks for your patience

https://ibb.co/4NNxRk4

Yeah I just noticed that in the 3D preview , I’m not sure what’s going on there . I’ll look into it and fix it

Thank you..Please let me know when you fix it please

Is it fixed yet ?

yes

What seems to be the problem

I don’t have a vast amount of 1:1 race car parts to get measurements perfect but I do the best I can to get close . All my adds say scale in your slicer software to desired size .

And can you have the tire separate please...ty

No I’ve never made a tire for it yet , I always just preferred using the front runners out of kits . I’ll work on it this weekend and see what I can come up with.

Can do , I’ll have another file uploaded with in a day or so .

ty

I’ve printed it and used it on a 1/24 scale 69 firebird model , it needed some sanding to fit the Body . Depending on your model it may need trimmed and scaled some to fit perfect

Not misleading anyone , it says in print directions scale in slicer to desired dimensions for your build . I don’t always have the 1:1 part on hand to get dimension 100% correct in 1/24 scale but I do my best . Always measure your build and double check sizing in slicer .

There’s also two files for the 9” ford did you print the second one? The second file in larger and closer to 1/24

Hi sorry the Bulk 9 Rear end is closer to 1/24 not the second one. The second one is more like a 1/64 scale, Since im new to printing im having a hard time finding info on how to re scale anything in Lychee software. Ill be wasting a lot of resin trying to get perfect size to work for me. Would it be to much to ask you if you can re scale the one file to 1/24 scale, The Bulk 9 is good its the other file. Thanks man, Kind Regards.

Sorry for the late response I don’t log in here that often , yeah I’ll see what I can come up with scaling it up larger for you . What I tend to do is measure in mm what the part needs to be then in your slicer it’ll have a dimensions tab you can adjust the dimensions up to what you came up with needing .

Hi. That would be great. I noticed with other designers on here they pretty much show you how to scale it in percentage, For example. If a print needs to be 1/24 they will say scale it to this percentage to get 1/24 scale. If you can just do the math, ide appreciate it very much. Sorry for all the rambling.

new file is up you should be able to download it, try that one out.