49 comments

Sky Mule X480 CH53 Sea Stallion Inspired RC Helicopter Fuselage

mostly 470 Size

Hi, very sorry for that. I have just uploaded all parts. please download again and if still can't, please email to ali@alishanmaorc.com Thank you

Hi Buddy, Thank you so much for your email. Which fuselage are we talking about? I do have a yxznrc F280 but rework is even more difficult than designing a whole new fuselage from scratch. I can do it but right now I am only taking paid custom design orders.

Hi, you can email me at shopcreatec@gmail.com and i can provide you a list of parts and links

hi, yes download from PC please.

Thank you for your inquiry. Yes I can do custom design, you can email shopcreatec@gmail.com and we can discuss it further.

Hi, Thank you for your message. please get in touch via email. best way to send email is to goto my site https://createc.store and use the alishanmao genie to message me :) thank you

Hello Buddy, Thank you for your support. Actually if you lay it flat, its just a tiny bit that needs support and they are very easy to remove and it prints simply without issues, very well. Which Printer do you have? and what issues are you facing printing the current one? Did you see the 3mf for my best orientation print?

I can make it totally flat at one side so there will be no need of supports, but then the handle grip will have to be either thinner or poke out at one side. Anyways I will update the handle and post a V2 version for sale once I finish it. To you, I will offer you STL for free of the updated handle. Please follow my cults3d channel and share my designs with more people.

Kindly send me an email, to shopcreatec@gmail.com and I will send you the updated handle stl.

Thank you for supporting my work.

Sincerely,
Mansoor Ali - AliShanMao

Thanks, I will try the V2 handle and let you know.

Hi buddy, no the Lama is specifically designed for FlyWing Small mechanics. Its of course possible to convert TREX500 if you print it bigger and diy modify the 500 mechanics to fit, but thats a huge amount of DIY and modification work. and I will not recommend it. I can do a separate design for TREX500 but it is very costly to do a custom design for someone. I am not sure if you would like to foot the bill. it can easily go above 1200 to 1500 USD just for the custom design due to the time factor and custom work.

Hi, Yes I can but only if you are willing to pay for the design charges. Such custom design will be slightly expensive. Give the expenses we have to face for all the test prints, tweaks, re design, re prints until final product. let me know if you are willing to go further on this project. please email to alishanmao@gmail.com
Thank you

Wie teuer würde es den werden ?

Please email me. Thank you, we can discuss the budget by email. I look forward to

Hello Federico, Nice to meet you. PETG or PLA they are not waterproof often. But using Bambu X1C I can print waterproof boxes and prints, that do not take water. with a thin quote of epoxy we can even further waterproof the prints easily. if you want to collaborate on projects, please email me. Thank you

Hi, This is designed to fit FlyWing Huey Uh1, Bell 206 mechanics. no scaling needed.

Just sent email from shopcreatec@gmail.com

Hi buddy, Which fuselage are you interested in? Mi24, Sea Stallion and Falcon are only for FW450 V3 internals. For Uh1 internals, you can get COB H1 or Lamantis :)

Ok thanks for replying I really liked the hind I have the CoB already

always welcome. Mi24 Hind has its own charm. that thing when you put in the air, it makes pigeons wanna migrate LOL. retracts are the coolest thing. you will find yourself just hoving and doing gear up and down for a minute for sure hahahaha

Hello Buddy, thank you so much for your support to my work. Actually I got my RS5 just recently and i will start the build soon. I have the tail boom so i can take measurements. and update the design. for now if you need to use it urgent you can use piece of rubber wrap around tail boom then put the gopro mount piece on top of it and tighten the screw, this will result in dampened mount that will absorb the virbations as well.

kindly can you email me at shopcreatec@gmail.com please

Hi buddy. It is ok. For this no need to pay. Enjoy it and share my work with others. Thank you

Hi buddy, thank you so much for your support. Yes I am working on an idea of actually a 500 and a 700 size MD500 and another heli :)

Refund request issued

Hello Buddy, Thank you for your like and interest in Cobra inspired fuselage. these are designed to fit FlyWing helis. Falcon X450 is designed for FW450L V3 helicopter mechanics, and COB-H1 V2 is designed to fit mechanics of Flywing Bell 206, Huey Uh1 and BO105 helicopters. as much as I want one more sale, however still to be honest, I would not suggest tinkering because I do not have a TREX450 so I do not know if this will fit, nor I designed it for TREX450 mechanics. There is no guarantee that TREX450 will fit.

if you like to experiment, most welcome, its all at your own risk if you want to try it. welcome to order it. but if it won't fit, we will not offer any support or refunds, replacement. Support means, the change of design to fit TREX450. I do have custom design services and I can offer a custom design for TREX 450, commanche or any other helicopters. however custom work and custom design does not come cheap.

Let me know if you are interested in hiring our services for custom design. Yes Commanche is in my list for next designs, Mi-24 is next I am going to work on, however, these will be for the mechanics of FlyWing GPS Helicopters mostly, or our own mechanics that I am working on to release. Let me know if you have any further questions. I will be happy to help.

Hi . Thanks for your honest feedback and answer. Really value that. I will follow your profile with Interest to see when you release the MI24. Very nice Heli that. And as you say custom designs are not cheap haha. So I'll have to wait a bit. Cheers for the great answer

you are always welcome. Kindly do subscribe to my channel (https://www.youtube.com/@alishanmao) all videos and updates are released there earlier. and GPS RC helicopters group to join many super nice rc helicopters pilots from around the world : https://www.facebook.com/groups/gpshelicopters

https://bit.ly/3YT8qeF
FW450 V3 :)

Hello, this is Cobra inspired helicopter, FlyWing Huey Uh1, BO105 and Bell 206 mechanics will fit in.

Hey buddy, I do not have those helis but maybe if one can just scale these down and do DIY fitting of those helis, this will be do able :) will be working on FW450 V3 fuselage next. :) and some other cool projects coming soon. Thank you.