204 comments

?

A 3D scan was sent to me from Chile. The scanner was used. (Creality Farret Pro)

Yes

I don't have a 3D scan of the car.

I have the car, could I scan it with an iPhone 13 pro max?

Unfortunately, I've already placed several orders with photogrammetry. Even after precise calibration, the 3D scan is 3-5 cm longer. I think this is due to the lenses of modern phones. The fish-eye effect. But if you get bored, you can message me on Instagram and I'll see if something works out. But lidar on an iPhone is complete nonsense to me, worse than photogrammetry. Lidar is just marketing.

Instagram m4ximys

All parts that haven't been purchased within one year have been removed. Poor quality parts that were purchased have been temporarily hidden until an update is available.

Y no sería posible de alguna forma poder comprar esos archivos? Gracias

no sorry

Yes.

Use the Luban 3D program. There's a video on YouTube showing how to use it.

and what about filament is it PLA ?

It will melt in the sun like butter in a frying pan, literally.

Only PETG or ABS, also fiberglass inside.

What are you talking about? This is just a message. I don't understand what you're talking about. Write in the product comments.

Yes and no. It all depends on the plastic shrinkage. There's no fastening. Due to plastic shrinkage, parts can sometimes be smaller. You'll need to manually adjust and fit the parts. You can check out Instagram. There are a lot of photos. Instagram m4ximys

I can't find the right settings for every head in the world. It's impossible. But in general, everything should be fine.

The price is indicated on the website.

Yes, many have printed with PETG, but fiberglass is essential, both inside and out. 100% infill. Use a 0.8 or 0.6 nozzle—it will be faster and much stronger. Height: 0.2. Plastic won't withstand direct sunlight, so at least one thin layer on the front is needed for readability. Fiberglass. Inside, there are actually 2-3 layers of fiberglass The approximate weight of the front bumper is 4-6 kilograms.

Fiberglass is a must! The bumper will simply crumble if you hit a pothole. Fiberglass is strong. Next comes sanding. Filler. Sanding. Primer and paint.

Apply the resin in a thin layer, gradually. Sometimes I've been told that the resin has slightly deformed the plastic. It could be the ABS. ABS can react with the resin. Therefore, it may heat up slightly and react with the plastic. The same applies to PETG plastic. Just take your time and apply a thin layer. You can join pieces of plastic with a regular soldering iron. You can even solder paper clips into the seams.

Set the wall lines for printing to 4 5 6, nozzle 0.6 0.8, height 0.2, filling 60 80. The lines need to be solid. To ensure the walls are unfilled, the part thickness is 3-4 mm. You need to install more lines for the corresponding nozzle. 4 mm = 0.8 mm nozzle = 5-6 walls.

Check out my Patreon. It's all there. There's a donation button on the website. All the information is free.

I don't know. There's not much electricity. And there are still a lot of orders.

I was thinking about changing the price to $1 for all product frames. I'll be working on it in a while. Let me know all the cars you need. I'll do it when I have time. Right now, I'm busy with BMW and Mazda.I can't say exactly when I'll be able to help, as many people have also asked for updates or other files. I'll try not to give exact times so no one has to wait ;)

Okay, great, and thank you. I'd like to have the roll cage for:
VW Golf Mk3 1995
Ford Fiesta R4 2020
do you need pics ?

Both 1/24 scale
Thank you very much

I think there's a Ford. I'll have to look for a Golf.

Yes, there is only one option for golf.

I'll do it in a few days. I'll write to you here so you'll get a notification and know what's already on the site.

Ford probably has a lot of options. So if you want, you can wait. I'll write to you here when I'm done.

ok , i waiting, thanks

Volkswagen Golf MK3 + 40мм. I don't make measurements, but I think you can reduce them yourself. The pipe thickness is 40 mm.

Print the left and right sides simultaneously. If there's a difference in size, the part will be too short. This is due to plastic shrinkage and is normal. Just center the part. Change the missing distance and create a spacer from the 3D model. For example, it would be 20 mm. Then, from the center, cut the part to the left and right by 10 mm. This will create a good spacer.Afterwards, you can apply a small amount of glue to the surfaces. Immediately solder the seams of the parts with a soldering iron. Afterward, you'll need staples for plastic repair. Then solder the paper clips into the seams of the parts in the same way. After that, you can add some fiberglass. Putty. Paint.

Thanks everything is clear, maybe you have headlight eyebrows?

No I don't like things like that for fap

Yes, someday

Okay, I'll be waiting impatiently.

I don't collaborate with anyone. Instagram m4ximys