I know the Luke and Kieran masks are for FDM printers but would they possibly be usable for a resin printer as well?
- 0 likes
👋 Hi everyone! This thread is public, so let’s keep it nice and respectful. No ads, spam or nasty stuff!
🇮🇩 User's country: Indonesia
🌐 Member’s preferred language: English. You can translate online via DeepL.
💡 Are you referring to a particular model? Add the link, title or model number.
🖼️ Want to post photos? Use a free host like ImgBB and paste the links in the message.
✍️ Writing Tips: Use the Markdown format to structure your text and make it more readable.
Write your message:
23 comments
Sure, they can be resin printed as well.
However there are some cons
1. Usually resin printers has smaller print size. But this depends on your printer.
2. Fdm prints can be shrink and bent using hairdryers or heat guns. In this case, the mask can be fit unto the users face by using this technique if the print is too small or too large. resin prints can not be treated as such.
- 0 likes
Hi do you have the predaetor mask for Rafayel. the catch 22 version?
- 0 likes
Hi. I bought the Luke and Kieran Love and Deepspace Mask. The beak is very thin compared to the rest of the mask. I have some really hard problems to sand it because its so extremly thin. Would it possible to make it thicker? That would really help a lot :)
- 1 like
Hello, thanks for the purchase.
I'll look into it and get back to you soon.
- 0 likes
Added half mask with added thickness
- 0 likes
hi! I also purchased this file as well! :) would it be possible to make the beak of the full mask a bit thicker as well?
- 1 like
Hello Thank you for your purchase, I'll look into it and get back to you soon
- 0 likes
Hi, I bought the Rafayel mask file but it is kinda broken and there is some artifact when I print it
can you please fix the file
thank you
- 0 likes
- 0 likes
Hello thanks for the purchase, i'll fix them asap and contact you soon
- 0 likes
thanks for the update
the file is mostly fine now except these "fin" still floating/ not fully merged yet
https://ibb.co/Rh3q99S
- 0 likes
I'll come back to you soon
- 0 likes
have u fix it yet
i want to try it asap
- 0 likes
Sorry for the wait
Still going through trial and error
I'll fix it at least by tomorrow
- 0 likes
Thanks for waiting, I have fixed them
- 0 likes
one of the fin still wrong and now the front thingi look a bit off but i can work with that
thanks for fixing it tho
- 1 like
Hi, I was wondering would you possibly consider making luke and keiren's mask from love and deepspace? Thanks
- 1 like
Hello, I purchased your Prime Vandal. I would like to make printing and assembly easier. Can you upload the step file?
- 0 likes
Hello, the lines on the two parts nozzle6,7 in the model THE BLUB BLUB RIFLE are too narrow to print, do you have a way to fix them?
- 0 likes
Hello can you send me the screenshot ?
- 0 likes
Hi,thanks for your great design.For Neptune Vandal,did you draw up the fish tank part by CAD?if yes,could you please upload the CAD file to Cults that i can download.
- 0 likes
Hello ! Unfortunately I don't draw this by conventional CAD and neither can I make CAD files out of it. I have added an STL file of which contains the fish tank glass stl. Hope it helps
- 0 likes
I purchased your Neptune Vandal instructions and really like it, but do you have an STL file for the window/glass pieces? I know you have the dimensions attached, but I have a clear filament I wanted to try and make it out of.
- 0 likes
Hello ! Thanks for the purchase !
I have added the requested file.
Happy Printing!
- 0 likes
Hi man! I really like to buy your Prime vandal. Would it be okay if I can pay you through Paypal since I dont have a card yet.
- 0 likes
Apologies, but right now transactions can only be done via cults.
- 0 likes
Oh, I just saw the Paypal option. Im printing the pieces now. Will let you know how it came out after. Thank you!
- 1 like
Sure! Thanks for your purchase
Happy printing
- 0 likes
Hi AN2ANDREAS! I really like your Vortex Vanquisher with LEDs. Maybe you can make hole for leds in 14.Pummel? I wanna make that part with clear resin and add leds. Thank you for your time^^
- 0 likes
I have added 14 Pummel A and 14 Pummel B, a 2 part half-half mirrors to insert your leds. Thanks for your purchase !
- 1 like
Wow! You're so fast! Thanks a lot I really appreciate it <3
- 1 like
Does vipers shorty have a reloading mechanism and bullets?
- 0 likes
Nope, it's completely static
- 0 likes
VALORANT PRIME VANDAL COLOR SEPARATION WITH LED TUNNELS The magazine part of this model cannot be fastened, is there a tutorial for the installation of the led lights?
- 0 likes
Yes, there's no fastener for the magazine. So i would recommend to use magnets if you need to open / close the magazine.
In my build, i even use permanent glue since i dont have to open / close the magz.
About Led light installation, I'll post a tutorial in near future.
- 0 likes
Thank you for your reply, I would like to know about the specific method of using magnet mounting
- 0 likes
Hey, what infil percentage would you recommend for neptune vandal?
- 0 likes
Hello, there's actually no exact percentage. But i do usually use about 5 - 10 %. On those rate, its strong enough for structure while not wasting too much time and filament.
- 0 likes
Hi, is there a step-by-step tutorial on putting together the prime vandal and how to input the rgb lights?
- 0 likes
About Led light installation, I'll post a tutorial in near future.
- 0 likes
Hi there, are we allowed to sell physical prints of your stl?
- 0 likes
Not for massive productions.
But i'll have no problem for small batches / private uses.
You can check the licensing on the product page if you're interested in its legal aspects.
- 0 likes
Hello. About your neptune vandal. What size is the file?
- 0 likes
It's about 15 MB in total. Format in zip.
When extracted, the folder will be about 35 MB.
- 0 likes
If i would buy the model would you be able to maybe slice it to two pieces?
- 0 likes
What is your printer size?
I'll see if i can do it
- 0 likes
as a note
The neptune vandal model is separated into many smaller parts to fit most of the printer these days (ender 3 V2, ender 3 s1, bambulab p1p, ender 3 neo, ender 3 pro, etc.)
The 2 biggest part of the model are
36 mm x 66.5 mm x 240 mm (vertical)
30 mm x 120 mm x 237 mm (vertical)
I printed them at home using my ender 3 S1 and the dimension fits
- 0 likes
I use the ender 3 neo so 225X225X250 mm
- 0 likes
The model will fit just fine in your printer, sir 👌👌
Happy printing
- 0 likes
Thanks!
- 0 likes
hello
Can you tell how much each part weight or the amount of filament used? wanted to do a cosplay but need to know how much it will weight please
- 0 likes
Hi, may i get some instructions on how to print the file of viper's shorty? for example, how many piece of each file should i print, should i adjust any measurements, etc.? thank you so much :D
- 0 likes
Thanks for your purchase Vera_Ng!
I recommend you to use the latest model,
here's the name of the files:
1. Snakebite Shorty ALL part 1 remix - 1 pcs
2. Snakebite Shorty ALL part 2 remix - 1 pcs
3. Snakebite Shorty ALL part 3 remix - 1 pcs
4. Snake Eyes - 1 pcs normal , 1 pcs mirrored
5. Snake Eyes 4 - 2 pcs
6. Glass glow left - 1 pcs normal, 1 pcs mirrored
7. Vial Fang - 1 pcs normal, 1 pcs mirrored
8. Glow Lever Left - 1 pcs normal, 1 pcs mirrored
Standard measurements will do just fine
- 0 likes
hello friend i bought your viper shorty but, its too big in my ender 3 s1 can you cut another file in half? i mean the gun can u cut it in half so i could print it twice
- 0 likes
Sure thing! I'll contact you ASAP
- 0 likes
thank you friend i will wait before i print
- 0 likes
Done.
it's named:
1. Snakebite Shorty ALL half 1
2. Snakebite Shorty ALL half 2
You can check on the newest updated file list on the download page
- 0 likes
Bonjour
Merci pour le suivi
Cordialement
- 1 like
Hey, it looks like the updated 3 piece Snakebite shorty has an issue that the inner barrels dont like up so its not possible to put a tube inside. Would this be able to be fixed?
Hello. Thank you for reaching out. I'll fix this and come back to you soon.
Apologies for the incovenience and please wait for the update