20 comments

Hi, sorry for the late answer! I am glad you like my designs :-) I do not take commissions unfortunately as I only do the designs when I have time. I will however put them in my catalog of wheels I might do one day

no problem, thank for the reply

Hi, what parts are we talking about and I suppose you want to offer physical prints? :-)

Wheels and tires

Hi, sorry for the late reply, that is fine by me :-) if you are selling them on a webshop, I would appreciate if you credit me as the designer :D

Sounds good. Thanks

Hi, the mounting system is approximately that of aoshima and fujimi the axle hole is 2,6mm in diameter which means that you could fit a new axle from model building plastic tube and with minor modifications it would fit directly on Tamiya as well :-)

Hi, just the width is different, so you have the possibility to do two different offsets ☺️

Hi, since they are 1/24 and you would like them to be 1/18 which is an increase by 33%, so in your slicer put the size to 133% of the original size or multiply the measurements by 1.33. Since they are 20.5mm you would get 27.27mm for the diameter :-)

thy

No worries, let me know if you have any trouble :-)

Hi, yes that is fine by me :-)

Hi, sorry for the late reply, I was getting married in Santorini, so I have not been online for 14 days. Which file were you referring to?

Hi Matthew! I suppose we wrote together on CGTrader as well correct? If so I have just answered you over there :-)

Hi, yes of course, they are a diameter of 22,4mm and a width of 12,7mm, the tire is 28,4mm in diameter :-)

Perfect thank you.

Hi, yes ofc, the scale is not the exact scale, the measurement is taken from model kits, the funny thing is if you have either a 1/24 or 1/25 kit, they are actually not to exact scale from the real car, neither are the wheels and tires. Your calculation is right and would be the exact scale conversion, the fact is just that model kits are actually off in scale. So my measurements are made to fit the model kits instead of the actual real life scale ;-)

Hi,sorry for the late answer,

The 1/24 and 1/25 just means that the scale is approximately 1/24 to 1/25, the scale is not exact to real life as the scale is taken from measurements from other scale model kits :-) the difference between 1/24 and 1/25 is approximately 0,7mm so you wouldn't be able to see the difference much, I can make you an exact file or you can rescale it in your slicer software? The original file is 17,4 mm meaning 1/25 is 16,7mm and for the tire which is 27.2mm would be 26.11mm.

Let me know.
Alexander

Hi, Sorry for the late answer, have had a bit of stuff on my plate lately, anyway, normally i would work out some business deal, but it is also hard across platforms, what files would you want to sell physical prints from? :-)

No problem, I was looking at your 2 Tire options, Rad Fan and possibly a wheel or 2?

Hi again, that is all fine by me ;-)

Thx Very Much! Credit will be stated as Designed by Wheelbase Scale Models👍🍻

Hello, sorry for the late answer, can you write me in English? :-)

Everything is scalable so you can scale it all you want, I might even think you will be able to scale everything if you want to, ofc the brushes, spray bottle and bottle will not work :-)

Hi, yes it is supposed to be approximately 1/24 scale, but you can re-scale it in your slicer, depending on what slicer you use :)

Oh, im using Cura, it means I need to rescale it to 2400% ?

I suppose you need it to be 1/10 then? in that case you would have to rescale it 240% :-)

Hello Luc, I have just added a one piece version included in the pack, so now you should be able to scale it down to 1/64, let me know if you have any trouble with it :-) - Alex

good morning....alex...
Everything ok. I already bought the file, everything is perfect, thank you very much. I already used it. I bought the exhaust file, very good too.
thank you friend for your attention... big hug...
luciano / brazil

Hey Luciano! So good to hear that everything worked out :D ! Glad that I could help you getting the Supra done!

Hi, which set of wheels are you looking at printing (cults only show me your message but not which set of wheels you are looking at) since most of my wheels are 2 or 3 piece I guess it will be hard in 1/64, but I can easily make it a 1 piece for you if you need it

Hi, I was planning to do various Auto Finesse things in the future so the bag is actually on my to do list, feel free to send pictures! :-) do you have a timeline of when you would need it as I have a few other projects in the pile of stuff to do first and I also have an upcoming holiday ;-) Kind regards Alexander

Sure how can I contact you to send the pictures? I’m not in any rush at all, so take your time

If you have instagram you can find me under the same name as here otherwise my email is alex.zederkof@gmail.com :-)

Hi, sorry for the late reply, have been incredibly busy lately :-) I am glad you liked the wheels! Feel free to do a giveaway ;)

Kind regards
Alexander