15 comments

ciao in che senso il modello stl?

di che modello si tratta?

hello I'm sorry you are not satisfied, if you want open a refund procedure I have no problems, however I am sure you will never find a better model than this to print

as you can see other users have downloaded the model and have not had problems in printing I myself have printed the model I created and as you can see from the photos it came out well if you can print set the supports well you will not have problems in printing .. anyway I check the model uploaded and if I evaluate corrections I will post the new version

the 3d preview on the file you uploaded itself has missing chain links. Kindly have a look and revert back thanks

I uploaded 195mm model with necklace fix if you send me a telegram contact I can send you files ready for printing just indicate the model of printer saturn or photon mono x

Thank you that'll be great. I'm using a photon mono x. Telegram id: @jetblack28

I have already uploaded the file for the mono x

thank you man

if you like when finished, post a photo of the result

Chun There I'm working on it

MODEL IS AVALIBLE FOR DOWNLOAD https://cults3d.com/en/3d-model/game/fortnite-chun-li-file-stl-195mm-h-base-vbuck

the models you see I make them are not models that I download from elsewhere .. you have to have a little patience that I make the model

That's okay i will wait. I bought the Doctor Strange model off you in the past.

spero eri rimasto soddisfatto

yes it was good. hope to add Chun Li to go with him.

stl or file blend?

MODEL IS AVALIBLE FOR DOWNLOAD https://cults3d.com/en/3d-model/game/fortnite-chun-li-file-stl-195mm-h-base-vbuck

https://www.youtube.com/channel/UCrggyOpJf8RfrVdsDkecz1Q

of course I can also do it but I can't test it as I don't have it. she will model the pedestal on a scan of the mavic pro. is it the first version?

Yes, the first version. Then I test it on the drone. Thank you very much!

here the model for the dji mavic pro 1 https://cults3d.com/en/3d-model/gadget/dji-mavic-pro-1-holder-piedistallo-espositore

It still says Mavic Mini.

the rendering was done when I had not yet modified the writing now I have updated the render

Does the STL have the file without the grid? It's just that whenever I print, there's a problem in the grid part.

I have to create it to solve the printing problem activates the z-hop on the whole model so nozzle does not crawl on the net

I bought the DJI MINI file and there is the STL without the grid. However, it's the version that has a lot of overhang, and I wanted the V2, without the grill. Couldn't you do the same with the Mavic Pro? A file without the grid?

yes of course I prepare a file without a grid

I uploaded 2 other versions without grid

Thank you very much! I'm going to buy it right now. Could you do the same with the stl of the mini 2 V2? This one I already bought the file, but I needed it without a grid. Would it be possible to send it by email, or would I have to buy it again?

The Mavic Pro file with the relief is faulty. Could you fix it?

i updated all file packages fixed mech issues and added versions to the model i hope you are happy

if you like when you have printed the model I would like you to share a photo of the result here

The Mavic Pro package is perfect. But I was wondering if I could do the same with the Mavic Mini 2 V2 I already purchased.

si certo

UPLOADED A NEW VERISONE FOR MINI 1 AND MINI 2 WITHOUT GRID WITH EMBOSSED LOGO

Thank you very much!!!!

Can you do it for the Mavic Air 2?

yes of course I work on it these days.
did you manage to print that of the mavic pro?
post photos of the result?

I tried 3 times, but I think the base is too big compared to the DJI Mini. That way, the filling of the surface is not good. Another issue is that the top, where the Drone goes, ends up covering all the equipment, leaving a less pleasant appearance than the DJI Mini... is there anything that can be changed?

I uploaded a new version more similar to that of the mini 2 look if you like it kindly if you print it, post a photo on the make section?

if you have a bit of patience I look for them and load them

Thank you.
Email address: wlsdn8807@naver.com, please.
Fortnite Jaeger map file (.tga)

I UPLOADED HERE ON THE MODEL A RAR WITH THE TEXTURES IN PNG THE MODEL I HAVE USED PNG FOR THE NON TGA TEXTURES

Thank you, but I think the file is missing.
Barbarian_Hat (.png)

was loaded from where you downloaded the model files
https://t1p.de/apc9f3

I received it, but there is no barbarian_Hat.png file. Please check again.

There are Barbarian_Body, Barbarian_Head in the file.
I think the Barbaraian_Hat file is missing.

file is in archive rar

I have all the other files in my archive rar, but I don't have the Barbaraian_Hat.png file.
Please check it one more time.

File in the archivear:
T_M_MED_Barbarian_Body_D
T_M_MED_Barbarian_Body_N
T_M_MED_Barbarian_Body_S
T_M_MED_Barbarian_Head_D
T_M_MED_Barbarian_Head_E
T_M_MED_Barbarian_Head_M
T_M_MED_Barbarian_Head_N
T_M_MED_Barbarian_Head_S
Additional files I need:
T_M_MED_Barbarian_Hat_@
T_M_MED_Barbarian_Hat_@
T_M_MED_Barbarian_Hat_@
Please check it one more time.....

now i understand i have updated the new rar archive i apologize for the wait

Thank you. It's settled.

scrivimi su specialtuning@hotmail.it

hello what character are you talking about?

sorry pence you spoke english. the clutch skin needed from jorhan's pack

if you send me a picture of how you would like it i will see if i can create a good stl model ... how much would you be willing to spend if i make you the model as you wish?