👋 Hi everyone! This thread is public, so let’s keep it nice and respectful. No ads, spam or nasty stuff!
🇨🇦 User's country: Canada
🌐 Member’s preferred language: English. You can translate online via DeepL.
💡 Are you referring to a particular model? Add the link, title or model number.
🖼️ Want to post photos? Use a free host like ImgBB and paste the links in the message.
✍️ Writing Tips: Use the Markdown format to structure your text and make it more readable.
Hello Scale-Canada,
I purchased your 1/10 scale sand blaster cabinet for my personal use in a couple of my 1/25 scale dioramas. I also print items to sell at my hobby groups and at local hobby shows/swap meets. With your permission, I would like to sell the finished product at my swap meets.
Thank you for your time,
Ed Wynn
Normally I would prefer people to not sell finished prints, but I have no control over if they do or not. Merry Christmas!
hello, I purchased this file and does not match the picture of the body listed
Let me fix it, then you can re download
Hello. I was trying, and failed, to print your water jug on my 5M Pro. The first time, the printer kept on printing in the air without touching the jug at about 35% so the material was spilling. The second time, it went as far as 83% but the it happened again! I have no idea why this is happening, and I don't want to try a third time without knowing what's going on. I think this is happenening when the shape changes. Any help please?
This is the link for the water jug I was trying to print. https://cults3d.com/en/3d-model/various/1-10th-scale-water-cooler-dispenser
Thanks
Here is the link for the images. https://ibb.co/P1GyRc1
https://ibb.co/jvfW7XJ
What slicer are you using? You might want to run a repair on the file in your slicer and try again. I printed many of them from Cura and Orca Slicer, as well customers have not reported any similar issues. Please let me know how it goes.
I used Orca slicer and tried twice with the same results. Interestingly enough, I printed a different one, same scale and color, and it printed everything without a problem, even the handle and the valve being so small printed perfect. Yours had the problem right on the transition form smooth to wavey. The first try when it transitioned from smooth to wavey and the second time from wavey to smooth. I can't figure out what could cause that because I printed several other files after and had not a single problem, and my Flashforge 5M Pro is new.
I have a new printer arriving soon, I will test that file on it and see if anything bad happens. Also refunded you
I just printed one, no issues. Added to pictures as well.
1/10 SCALE 4 POLE LIFT Do you have any more photos with different angles? I need to see how the ramp sections are fitted and held together.
I need to use the half ramps component 7&8 plus half ramp braces component 16. Then what size screws do I need to attach them to the ramp cross frame?
Very sorry I missed your message. I haven't built one of these in a few years and truthfully forgot what I used when bolting it together. Only other pic I have is here https://www.instagram.com/p/CAEx6d2p3qk/
Hey there i seen your model i was wondering what kind of truck is it based on?
its this one btw https://cults3d.com/en/3d-model/various/1-10-scale-truck-cab
Kinda Chevy Silverado ish :)
i was thinking a 90s silverado ill try some grill modifications for a sierra
Hi there, I just purchased the model below and it is far too small for what I was looking for.
Could you please assist with refunding the design, and updating the design description to include measurements to assist with others in the future.
https://cults3d.com/en/3d-model/various/1-10-scale-stackable-shelf
so sorry I just saw your message. You said it was far too small, you can always scale it in your slicer program. It is set for 1/10 scale
You asked:
Hello, I have a question
Does the file also include the cabin?
LG S.Price
What model are you asking about? Thank you
Guten Tag ich habe eine Frage
Beinhaltet die Datei auch die Kabiene ?
LG S.Preis
question about the 4 post lift. for the long ramp components - what the trucks sit on. I need to print it in 2 prints. Which files go with which when assembling?
have ramp half 2 comp 8
ramp half 3 comp 7
ramp half 4 comp 7
ramp half 1 comp 8.
DO all 4 of those go togetgher to make a long ramp? and when i say ramp i mean what the truck parks on
if you look at 4 post lift v2_4 post lift v2_ramp (1)_1_Body1_ramp (1).stl you will see 4 holes - this is the one piece the vehicle sits on. The other ramps are there for either when you want it hoist in low position so the car can drive up or when at full display height and the ramps kinda hang down. so you can decide how you want to build/display it. Hope that helps?
I also refunded you for one of the purchases - my gift to you, thank you for your support!
i see. so you dont have a file that splits that one piece in half?
no, but what slicer/printer are you using?
Sorry not sure what I was looking at before, but there are the ramp files (half 1,2,3,4) so 1 and 2 go together and 3 and for go together.