Hello. I purchased your keychain display rack. Do you happen to have a hanger for dragons?
- 0 likes
👋 Hi everyone! This thread is public, so let’s keep it nice and respectful. No ads, spam or nasty stuff!
🇺🇸 User's country: United States
🌐 Member’s preferred language: English. You can translate online via DeepL.
💡 Are you referring to a particular model? Add the link, title or model number.
🖼️ Want to post photos? Use a free host like ImgBB and paste the links in the message.
✍️ Writing Tips: Use the Markdown format to structure your text and make it more readable.
Write your message:
34 comments
Yes I do, I have a whole base and thicker rods as well, they are available on my maker world account https://makerworld.com/models/71085
- 0 likes
Awesome! Thank you!!
- 0 likes
Hi. For your keychain there are a lot of files. Are there assembly instructions for the basic 2 1evel holder? Thanks!
- 0 likes
The item mentions some instructions but I am not finding any instructions for these. The image shows a bottom holder for the steel plates. I cannot figure out what that is.
- 0 likes
the top and bottom plate holder are the same item on the magnetic rack. to build the rack you do, the base, the bottom top/bottom part, then a center rod, then the top/bottom part, then the cap
- 1 like
Hi, I just downloaded your Easy Display Shelf Bracket and I was wondering if you could make a bracket that would add another 1x4 on top? In the configuration on your first photo there is a bit of the 1x4 sticking out the side of the bracket and I would like one to attach there and build up for another 1x4 shelf. Thanks for considering it!
- 0 likes
I really like the pumpkins. What are their dimensions?
Thank you
- 0 likes
I printed the brackets at 100% but they weren't a tight fit for 2 pieces of 1x8. did you have to scale it for the one in the picture?
- 0 likes
No I didn't, what is happening with them?
- 0 likes
I printed 4 of them at 100% scale and I have about a 1 in. gap when put 2 1x8 boards through the the bottom brackets. it looked like a right fit in your image
- 0 likes
The slot is for 1 1x8 if you used two board those would have to be 1x4 which are actually like .75x3.50 and a 1x8 is actually .75x7.5 so 2 1x4 will have a big gap around .5-.625 gap
- 0 likes
The first picture is of my first test which was originally made to use 2 1x4 I then updated the design to use 1 1x8 instead
- 0 likes
Hi I tried to print the keychain hanger rack and the bottom plate while printing messed up. Would you recommend supports and how would you suggest printing it?
- 0 likes
I read the last line wrong and saw "1x4" and the picture and see what I did now. I'll go grab a 1x8 tomorrow at least I have 1x4 for top now hahaha
- 0 likes
Hello! I just got your Keychain display rack - all of the hanger files are just a hair too big for the Prusa MK4. Can you make a version that's just a hair smaller so I can print these? Thanks!
- 0 likes
Hey there! You can scale each part down by 5-10% with no issues
- 1 like
Thank you for your reply! I'll give this a shot!
- 0 likes
on your file for sale "Easy Display Shelf Bracket" could you take the square bracket and make a secondary identical but add a woo slot on the bottom so you could use it and potentially stack those? another idea could be to make it have feet that can be attached and removable on the corners to add extra stability in stack orientation
- 0 likes
Would you mind documenting the "groups" of files that are needed for the complete print? I'm not 100% sure which files are "extra" pieces of a different style, etc. I do not want to print all of them and have pieces not needed. Especially if I use New Plates and Shaft, i am assuming that the base file do not need to be used, but not sure what else would be needed or not.
- 1 like
hey, I'm using a prusa mk3s and the "HANGERS REGULAR V1 FILE" is too big for the build plate. was wondering if it is possible to a medium or a .Step file so i can edited in my CAD program. -thanks and have good one.
- 0 likes
could you do the display price blocks in south african rands ?
- 0 likes
Hey would you be able to whip up some % numbers, and a block for Off and Sale?
- 0 likes
I've been using your display items! And they work great! Would it be anyway possible to convert the keychain display into a rack that would hold crystal wing dragons
- 0 likes
https://makerworld.com/models/71085 I have a dragon rack that is a beefier shaft and different hanger for dragons
- 0 likes
Hi! I love your price blocks! I get compliments on the all the time. Is it possible to add a "3 for" spooky block? Thank you!
- 0 likes
Hello! could I get some direction on the different shaft configurations for the display keychain spinner? thank you
- 0 likes
Hello! So with the shafts. There are a few different sizes just for youre own liking. There is a 2.5" a 4" and a 7" that are made to print as 1 piece or a lower 5,6 or 7" piece that a 3" upper is made for if you need more height depending on what youre hanging on it. How I set mine up at my shows is with three 7" shafts with hangers on each one. But really its made so however you want to configure you can. There is no right way or wrong way. If you have short things hanging then use the shorter or vice versa.
Thanks for the question and I hope this helps!
- 0 likes
Your designs are wonderful and are really helping me with my market setup. Thank you so much for making them. Would you be able to provide a 3 FOR - 5 FOR blocks?
- 0 likes
Hello,
Really love the USD price tags but would you be updating the signs with larger digits? $45+
- 0 likes
Hello, I have updated the prints with all new numbers up to $100
- 0 likes
Hi, can you please provide the size of the steel sheets used in your spinning magnet stand?I'm from the UK and can't open the we page you gave! Than you!
- 0 likes
Hel0o, sorry for the delay. They are 5" by 11" and are .050" thick. Or 12.7cm X 28cm and .127cm thick
- 0 likes
I am trying to print out the spinning display rack on my ender 3 S1 but the bed isn't big enough to lay the key ring holders down and I wanted to know if I would need supports around the entire print or if I could just have them touch the build plate
- 0 likes
Hello! If you havent started printing parts yet the model is scalable. In the file I also offer some shorter length arms. as far as supports no part of the model needs supports. 5-10mm Brims are just recommended for the shafts, as when they get taller there is more chance for them to tip over. Every other part should print support free no problem.
- 0 likes
I have already printed 1 shaft and I am printing a medium tray now, so it looks like it will just have to be medium trays and arms for this one. Thank you for the reply
- 0 likes
What is your build plate volume? I could make a size that fits the build plate for you
- 0 likes
Hi some of your bricks are NOT scaled properly in bambu studios. Just wanted to let you know!
- 0 likes
Hey! Which file are you talking about? I see you purchased the magnetic spinning rack. I used all the stls that I have in this file for my current one I'm using. What file are you seeing as not scaled properly
- 0 likes
It's your price blocks 2 for 1 is too big unless it's meant to.
- 0 likes
I love all your designs but I have a couple of notes. First, wayyyyy too many triangles. Second, there are a lot of open faces that need to be fixed.
- 0 likes
Hey! I found the issues and am going to re upload the files in a moment. You will get an email saying you can re download them. Thank you
- 0 likes
Hello! Do you have a commercial license version of the keychain display stand available anywhere?
- 0 likes
no there is not
- 0 likes
Buenas tardes, el estante de llaveros se imprime en PLA ? o es recomendable en PETG ? saludos y buen dia.
- 0 likes
lo tengo impreso en PLA pero cualquiera estaría bien
- 1 like
Display Price Blocks - USD Currency
Would it be possible to get a $150 and maybe $125 added? I just found and bought your design, it printed very well but i need the larger amounts if at all possible for a craft show the day after tomorrow.
Thanks