Mechanical Engineer with decades of experience designing.
If you require 3D design work contact me via email at:
👋 Hi everyone! This thread is public, so let’s keep it nice and respectful. No ads, spam or nasty stuff!
🇨🇦 User's country: Canada
🌐 Member’s preferred language: English. You can translate online via DeepL.
💡 Are you referring to a particular model? Add the link, title or model number.
🖼️ Want to post photos? Use a free host like ImgBB and paste the links in the message.
✍️ Writing Tips: Use the Markdown format to structure your text and make it more readable.
I am using Bambu Studio to attempt to load the STL files. When I import them into the software, I get a message saying "The file does not contain any geometry data". I've tried downloading an individual file, as well as the entire list of items. I get that message on about half of the STLs in the pack. The file I'm attempting to load now is the Left file, but others were failing as well. Please advise. Thanks
You were correct. The files were corrupted during upload. I have checked all the files and uploaded them again. Let me know if you have any further issues. Regards, Ron
That worked. Thanks!
Awesome
One area jumps to mind in your print setting did you ensure you selected supports in the corners. It doesn’t require much support in the corners, but it is important otherwise the corners sag down. Check your slicer preview to ensure they are there. If you don’t think that is the issue, send me some photos to rabman3ddesigns@gmail.com and I can help you further.
Hey. I bought this for the Samsung Galaxy Tab A9+ 11”, but the tablet won’t fit inside. The inner “edges” look like small triangles and they’re blocking it. What was updated in the latest design? Thanks!
Just following up to see if my recommendations corrected your issue.
I have the sixth generation design completed. I will upload it later today. At this time, I will not be adding a magnetic charging port, as I think the alignment with the pogo pins will be difficult with people‘s different printer calibration. I also did not see a significant improvement over the current design which plugs directly into the USB port when you slide the tablet into the wall mount. With respect to the IKEA skadis, are you looking for tabs on the back of the wall mount to connect to the skadis peg board? If you do end up purchasing the wall mount, I can provide you STL files with no screw holes in the right mount via email afterwards.
Exactly, I already have the STL file for the hooks ready, so it would be handy not to have any drill holes!
Thank you very much!
Ok. Purchase the mount and then send me an email at rabman3Ddesigns@gmail.com and then I will send you the modified file with no screw holes. Alternatively, you can just fill the holes with a modifier in your slicer software.
Hi Rabman
I own an iPad Pro 12.9-inch 6th generation—can you adapt the wall mount for it?
And maybe add the magnetic charging port?
I would like to use one of my iPads with the magnetic charger on my Ikea Skadis shelf; I can add the Skadis holders myself.
See the links here for the 5th and 6th Generation round and square corner:
Hi Rabman, I have purchased and downloaded the files for the A9 Plus 11 inch tablet. I see that the A11 plus is also an 11 inch tablet and have a request if you could please modify this design to fit on the A11 Plus which is also an 11 inch tablet to the extent that there needs to be any changes for the a9 plus wall mount to also work for the a11 plus. I look forward to hearing from you. I will share my thoughts on the A9 Plus 11 inch once it is printed and mounted.
I will have a look.
Hello I know I have such an old device but I wanted to use this old iPad Pro 12.9 1st gen 2015. I am using as a weather station and home stuff. I would love to mount this on the wall and saw your rounded corners 12.9 one and fell in love. Any chance of getting one for the 1st gen?
The Design is completed and posted in both rounded and square corners:
Enjoy!
Hi there, could you please also make a mount for this one? Lenovo - Idea Tab Plus - 12.1" 2.5K Tablet - 8GB RAM - 128GB UFS - Luna Grey
It is slightly different from the 12.7" mount that was just put up. Thank you.
I have the design round and square designs made already but it is currently marked as secret as I have not had someone test it yet. If you want to test it and provide feedback and photos, you can email me at rabman3Ddesigns@gmail.com and I will provide you a link.
awesome! happy to print and help you test it out.
Email me for the files
I will certainly have a look and compare the two. I will let you know. If it isn’t, I can make one for it.
Hi, will the iPad pro 4th gen wall mount also fit iPad Air M2? Looking at the specs Air 2 is only 0.2 mm thicker, but sometimes that can also be a problem.
By the way, would be good for you as well to create a dedicated one for the Air M2, I couldn't find any good wall mount 3D models for it online. Cheers!
I can. Keep an eye out.
Good morning? Could be for tab s2 8.0 "
The design is online now. Let me know if you have any issues.
https://cults3d.com/en/3d-model/home/samsung-galaxy-tab-s2-8-0-inch-tablet-wall-mount
Email me at rabman3ddesigns@gmail.com if you need to contact me.
Hey! I saw your great wall mount designs on the FB HA group. Any chance you would do one for a 10.5 iPad Pro? Released in 2017. I would happily purchase.
I would be pleased to. Keep in mind I do not have physical access to one, so the design will be based on available dimensions but I would be 95% confident it would work the first print. If not with your feedback I can make it 100%. To compensate you for your time, I would give you a 25% discount. Email me at rabman3ddesigns@gmail.com if you have further questions.
I have the design completed. Email me for the private link.
I can look into it.
thank you so much!
I have the design completed. Feel free to get in touch with me for the secret Cults3d URL which will not be currently available to the public.
mailto:Rabman3Ddesigns@gmail.com
Not sure if you have received my emails, but the design has been completed a few weeks ago.
Yes that one..
Or is it this one?
can you make a wall mount for the Lenovo Idea Tab Plus?
Thank you.
Yes that one
Not currently but I can work on it. I will let you know when it is completed.
Hey do you have for the Samsung 8.4 inch
Here is the design. If you have any issues with it, message me.
Sure I will refund you
what should i do now?
Nothing. Here is the link for the iPad 7th gen. https://cults3d.com/en/3d-model/home/apple-ipad-7th-or-8th-gen-tablet-wall-mount
but I have to buy another project. As I wrote, I made a mistake in the logs, I probably didn't even download it.
Hi I bought the wrong design. I need a frame for the iPad 7 A2197. Can I return the purchase?
Do you have a wall mount option for the Lenovo idea pad (K11 gen2)?
Thanks in advance.
I am out for a few hours. I will verify them when I get back.