What size is it? Can i print it 254x254 bambulab?
- 0 likes
👋 Hi everyone! This thread is public, so let’s keep it nice and respectful. No ads, spam or nasty stuff!
🇸🇪 User's country: Sweden
🌐 Member’s preferred language: English. You can translate online via DeepL.
💡 Are you referring to a particular model? Add the link, title or model number.
🖼️ Want to post photos? Use a free host like ImgBB and paste the links in the message.
✍️ Writing Tips: Use the Markdown format to structure your text and make it more readable.
Write your message:
7 comments
Hi,
As you can read in the information.
This is a design that will demand multiple prints.
I use a Bambu Labs X1C and as I recall, I printed them as 8 pieces.
Many have, as well as I, went for on rear and one front complete print, and used the prints as template to get the holes correct, and cut mudflaps in 3mm thick and 200mm wide reinforced rubber.
It all depends on what wheels you have on your car.
I have 9x20" ET35 with 10mm spacers and 265/35-20 tyre front, and 10x20" ET35 with 10mm spacers and 295/30-20 tyre rear, and this will demand deeper/longer mudflaps than this print will allow in order to protect the rear bumper.
For the front, this print will work superb, but if you are running wide in the rear, I would suggest using the print as template for a rubber setup.
BR
Janne
- 0 likes
What is the size? Can i 3d print it bambulab p1s 254x254?
- 0 likes
Hi, do you also have the file available to cut the wheel arches? thank you Simone
- 0 likes
Not sure what print you are talking about?
- 0 likes
- 0 likes
It's added now!
- 0 likes
Genialer Entwurf! Ich habe ein ähnliches Produkt auch in meinem i3s. Wie komme ich an das fertige Produkt? Ich habe selbst keinen 3D-Ducker und auch keinen Zugang zu einem.
- 0 likes
My german is not that good, but are you asking me for where to get this printed?
- 0 likes
Hey, when i open your file SETUP STAND FOR CARRY/STORAGE IN HUDY 199280L-H CASE is too long like 1500mm. Could you please look into it?
- 0 likes
You can scale this in your slicer before printing. If your slicer shows 1500mm, just re-scale to 150mm!
- 0 likes
size si wrong. pleas fix it
- 0 likes
What's wrong with the size?
- 0 likes
when i open it in cura. then it is 2 meters long
- 0 likes
Scale in slicer to 200mm
- 0 likes
Bonjour c'est possible de faire une version pour ventilateur de 40mm Merci
Hi, It's possible but it's not advisable for two reasons, the fan will be heavier and the size will make it not centering the parts for extra cooling. I drove both my Xray X4 and X4F with this, and unless you are driving with something wilder than 10.5T, you don't need larger than 30mm.