12 comments

I don't know if I understand the question right. But the feeding troff can be placed between the folded front and rear belt during transport. And when the belt is extended the feeding troff is placed at the back. That place has more rollers under the belt there, so support better the materials placed in the feeding troff.
In theory the feeding troff can be placed anywhere on the belt. But in other places there are not extra rollers, so the belt could get stuck then if lots of materials are placed in the feeding troff.

Hope this anwsers your question.

thanks mate that is the answer I ws looking for actually ahah. Enjoy the rest of your evening

Hi, the garage itself on the photo is not 3D printed. Its wood with printed paper on top. If you send me an e-mail. I can send you the pdf of the drawings. E-mail adres is on last page of Manual. Best Regards, Prince3dDesigns

Hi, I made the files for the warehouse floor and walls available as a seperate set.
https://cults3d.com/en/3d-model/game/warehouse-structure-printable-floor-wall-set-diorama-background

Hi, no not at the moment. The 3d printer I have is 24/7 printing my own new designs for testing and developing new designs to sell here on Cults.

danke für die schnelle antwort

I printed those floors without supports in the fork holes. Only used supports touching base plate for the connecting pins.
If you want to print with supports you Should use bigger x and y distance in slicer settings for supports. So there is more distance on the sides to remove them.

Thanks. How would i stop it adding supports? it won't let me print without supports enabled?

I'm not sure which slicer you’re using, in mine I can ignore the warning and still print without supports. Because its not needed in this case. But dont know how this works in your slicer, so you might need to manually block supports in specific areas or adjust the support settings. Maybe check if your slicer has an option like ‘support blocker’ or ‘paint-on supports.’ or ‘only on printbed.’
Here I cannot post screenshots, on the last page of the manual is my email address, if you send me an email about this, I can send screenshots how I adjusted it in my slicer.

Thanks for the help i'll have a play around and try and print without support.

Great print so far but i'm having an issue with "20ft Breakroom-Office Container - Outer Side Walls" the holes don't appear to line up with the pegs. Could you please check? Thank you

I've emailed you a screenshot to hopefully show the issue.

Hi, the flenges are a metal piece. So there is no STL for it. I see it was missing in the part list of items to buy, I'm sorry about that. But it has been added to the part list and instruction manual now.

Hi, thanks for your message, I see indeed 4 files were missing. These have been added now to the ZIP file. Good luck with printing!

Hi, thanks for you request. I see you also purchased the "US Traffic Sign Set" there is a STOP sign in there, I think it almost looks the same as the German one, but I'm not from germany, so don't exacty know how it should look. And for the other sign, 'main road sign' I also dont Exactly know which you mean. Is it possible you send me an photo example to prince3ddesigns at gmail dot com, then I will be able to create and add those in right dimentions to the PDF files. Thanks.

Hi, Indeed I see one of the holes is missaligned a little, I updated the 'Outer Front Wall Right' file, and now the alignment is good. Hopes this fixes the issue for you.

Hi, my design is made in 1:14 scale. If you print it at around 16% scale in your slicer, it should come out as 1:87. At that size, the motor and hinge functions won’t really work anymore since the details will be too small, but for display purposes it should work fine. You can glue the pieces in place instead of using screws.

Thanks for your message! How much extra height would you need? Would adding one extra panel of about 4 cm be enough?

I’m currently working on a design to allow for a taller door. The main challenge is keeping the rails smooth and functional while ensuring they still fit on a 3D printer bed. With current design the length was the maximum for my print bed.
I’ll do my best to make this new design available soon, but please note it will take some time to print and test before release.

Hey mate year one panel would easily. Would I just have to lengthen the rails and print another panel

Yes, extending the vertical rails is straightforward, but the three top rails will also need to be extended; otherwise, the door won’t open fully. Those extensions will also need proper support to ensure smooth operation.

I’m currently working on this and will send you a message once the updated design is ready and released.

Awesome cheers mate much appreciated

Hi, just updated the design, now you can also print it as a 32cm high version.
Hope you will enjoy it!

Thank you mate much appreciated hopefully I can get home on the weekend to download it. Cheers