Hardware engineer during the day, hacker during the night, im in this because i love 3d printing. If you have some sweet 3d printing ideas which you would like to see printed, feel free to contact me :)
👋 Hi everyone! This thread is public, so let’s keep it nice and respectful. No ads, spam or nasty stuff!
🇸🇪 User's country: Sweden
🌐 Member’s preferred language: English. You can translate online via DeepL.
💡 Are you referring to a particular model? Add the link, title or model number.
🖼️ Want to post photos? Use a free host like ImgBB and paste the links in the message.
✍️ Writing Tips: Use the Markdown format to structure your text and make it more readable.
Hi, i was wondering if you would consider selling the files for just the furniture(wooden parts) of your SVD file,if so how much?
No, I am sorry, I cannot separate only those parts :(
You should consider lowering the price of your P1S wrapping. The reason your view to purchase ratio is so bad is because you priced it too high.
Price of Starbucks coffee and a sandwich is absolutely acceptable to me, considering how long I spent making this model, printing it, fixing it and re-printing it again
That’s wild here I’d pay $12 for those two items.
But either way, consider the fact that there are plenty of people who would purchase it if it was priced a bit less you’d make more money in the end. Being greedy isn’t making you more money. 5 sales for $100 each is a lot less money than 100 sales for $50 each.
Alltho I really understand your standpoint, I think you should really consider amount of time and filament that I put in this work. And on top of that ofc I will cap the idea itself as well as years of experience with 3D modelling.
That being said, drop an email if you wish, I can send you this 3D model for free :) Post it around here and on social networks if you wish, once you are done printing :)
If you’re serious my email is sandos2652@gmail.com I’d post my makes around!
I just sent you an email, check also your spam inbox
Hello, nice to meet you, I'm John. I would like to know if you can design the hill with the specific measurements for the McMillan Tac-50. And if so, how much would it cost? Thank you very much.
I downloaded the Barrett and M200 sniper rifles, amazing! Total attention to detail! Can you produce the B&T m300 sniper rifles? I would most appreciate it!
Hey, I am planning to start again with sniper rifles during the winter, so I will keep your request in mind :) But check out my other rifles in the meantime
Hey, i love your VSS Vintorez model, if possible, can you design a fitting 20 and/or 30 rounds magazine for it?
I need to look into it, i will try but cannot promise anything, its bit hard to go back to the old design :D
Understandable but my thanks in advance!
Hey i saw your work for lure molds 2 years ago ,
Can you upload them agian?
Hey i saw your work for lure molds 2 years ago ,
Can you upload them agian?
No, I have sold the rights for those 3D models to the private company, they will no longer be listed, sorry
Can i find that company ?
Can you do a 117 logo for the Vault storage box?
I can, but next week, I'm currently on vacation ✌️😁
Thanks man! Have fun!
Will you be able to do that?
I already did, you have 117 among files :) I thought you saw it
Ooohhh I didn't, thank you!
Hello, my name is Dave. I recently purchased your Barrett MRAD files. I want to give you some feedback on your design and have a question to ask. I'm blown away by the quality of your design work. It's clear you spent a lot of time working on this. I greatly appreciate how it's divided up and how you integrated assembly features to make this thing go together easily. You're far ahead of your competition on Cults. I'm about 60% of the way with the glue up. I can't wait to hang this on the wall. I'll be purchasing your Macmillan Tac 50 and the Barrrett M82 next. Here's my question - do you have plans to release any other rifle designs??? Please keep up the tremendous work! Sincerely Dave
Thank you very much for the feedback Dave! I really appriciate it! Actually I was not planning any new rifle soon, but I got a loooot of requests for a new designs, so I think im gonna start with some new designs after the summer again :)
I need a little bigger.
Little bigger what? :)
Banana Knife DESIGN NUMBER 1672287
Can I have permission to sell your design?
Could you offer a monthly subscription?
Banana Knife DESIGN NUMBER 1672287
Can I have permission to sell your design?
No, sorry :(
Howdy howdy, working on functioning bear detector's for a S.T.A.L.K.E.R larp, was curious if I could talk to you sometime regarding how you made yours work. My email is seeyouspxcecowboy@gmail.com , hmu whenever you are available
Hello, I just purchased your Hilka detector and I am beginning to print it now!
it would be very helpful, either in the file names, or as a list, to note which parts print in each color.
I am printing the parts separately so there is very little waste switching colors for every layer.
thanks!
Thank you for purchasing my model, hope you have fun going into The Zone! :D
For these parts i used:
Esun Silver Silk PLA for: Antenna A, Antenna B, Antenna C, Antenna spring tensioner
Zero Green Matte PLA for: Handle, Housing A, Housing B, Top lid bezel, top lid
Black PLA for: Handle bottom lid, side selector switch, screen bezel
All other parts were printed with color swapping, so i get multicolor, but you can technically print them all in single color plastic and hand-paint them later
Dont forget to look into the instructions and read carefully what i wrote and you will have no problems with the model :) If you are happy with your results, please post it here as a "make" and post it around on social media, it helps me a lot <3
Hello, I purchased your MCMILLAN TAC-50 1:1 LIFE SIZED SNIPER RIFLE and have a few questions. First off I see that in your pictures it shows you used a smooth plate to print on, I have the textured plate and was wondering if you feel it is important to print on a smooth plate or if you feel the textured plate would work and not take away from the print quality? Also I cannot find the wall mounting files in my Stl zip. Can you please advise. Thanks in advance.
Hello! First of all, thank you so much for downloading my file! :)
-I used smooth plate simply because it was mounted on my printer, but you can use textured plate as well, I dont think it will affect your model at all. Just make sure to go trough the folder where I show how to orientate models on the plate, it will help you a lot :)
-Files for wall mounting are named "FRONT WALL HOLDER X1.STL" and "REAR WALL HOLDER X1.STL". Please check if you can see them there :)
Main advice i can give to you: Print ALL the files before starting to glue them together. Plan well what goes where, especially around bolt area, and follow my instructions, and you will be good :)
And if you want, post it here as a "make" when you finish, as well as social networks, it really helps me out <3
Appreciate your advice! So excited to begin this print project as it will be my biggest one yet. I found the wall mounts in the stl folder as you indicated.
Great! Dont worry, i left nice tolerances between parts when designed, so you will not need to sand anything, its pretty much one big puzzle :) If you are happy with it, check out my other rifle models
Great files!
Thank you! :)
Bonjour vos axes sont pas stable donc ça sert a rien
Извини, можеш ли да разјасниш о ком моделу причаш?
On the Anzio 20mm file. After opening it and browsing the stls, I do not see any wall mounting files. Is this particular one too big, or is it just an oversight?
Let me check when I get home in an hour or two, Im sure I attached them, but need to check. Either way I have those files, so it might be oversight
Hello! I checked the file and its called "WALL HOLDER X2 (OPTIONAL).STL". It is already in the ZIP file that I uploaded. Let me know if you can see it
Got it. I'll post pics when its finished. Thanks again.
You are welcome :)
Hi!
I am interested in your Barrett M82 model, but my printer is an Ender-3 V3 KE with a build size of 220 x 220 x 240.
Is it possible to print this model as is?
Hello! No, you would need to cut 2-3 files in slicer to be able to print it on those dimensions, but you can always cut files and glue them together
Thank you.
Hello, I am interested in buying your VSS project, but before i buy it I would like to know how much filament and what colours should i have. Would you be so nice and tell me? Best regards
Hello! I used:
-Esun PLA+ brown for "wooden" parts
-Esun PLA silver silk for "silver" parts
-Clas Ohlson black PLA (this one i dont think its sold outside of Sweden, but any other PLA will do)
I dont remeber exact figures, but i used 2 perimeters 20% infill, 3 layers top and bottom and it took me about 1-1,5kg of plastic
Hi! I just bought your Cheytac M200 model. I see you printed it with a Bambu Lab machine, so will I. Could you please share the .3mf file/s to get the parts already laid on the build plates? Thanks in advance!
Thank you for buying my model, hope that you will have fun making it! :) Please share results when you finish it <3
Unfortunately, i didnt saved .3mf files when i sliced it, im afraid they are long gone on the SD card :( But take a look on the slicing pictures, it will help you how to orientate parts on the plate. You also have "x2" "x1" "xXXX" numbers in the name of each file, so you know how many times you need to print each file. If you are new to a slicer, use letter F on your keyboard, for quick orientation of the model onto the plate, you press letter F on the model on the plate and then you can choose on which plane it will lean onto it
will get to it, and share make when finished, thank you!
Which filament was used in the picture for the wago storage box?
-Giant arm clear PLA
-Bambulab basic orange PLA
-Bambulab basic black PLA
Hi for your barrett, can this be simplified and printed at a smaller scale using the STLs? I don't need any replica functionality just an accurate external prop in somewhere between 22-25% scale. I'm printing with resin. Is the mesh in the stl super dense or is it low enough poly for me to do the edits in myself?
I saw couple of guys printing it on smaller scale without a problem, but i guess it shouldnt be a problem on resin printer, since tolerances can be much smaller than on FDM printer. I cannot give you 100% guarantee that it will be out-of-the-box perfect, you will maybe need some sanding and filing, but i think you can do it. If you do print it, please post results, im quite curious how it will turn out :)
Hello, I want to buy that Vintorez model but before that I wanted to ask you if it'll be possible to print it with Ender-3 printer (220 x 220 x 250 mm)?
Actually, it is possible to print it on that size :) Longest part is 213mm. I will update that in the description of the model right now
Thank you very much
Can the bolt of an SVD be pulled all the way back?
Yes
Full travel?
I am not sure what you are referring to. You can pull selector switch down and pull the bolt all the way back
Is there an installation guide?
Yes, you get exploded view of the rifle and how many times you need to print each part. It is pretty easy, all parts are made with tolerances in mind. Also, make sure to follow instructions how to orientate parts on a build plate