the 1/35 7.62 ammo cans
- 0 likes
- 57 Designs
- 2.8k Downloads
- 599 Followers
1/35 Armor and 1/200 Titanic (and occasionally others) STLS I've created for personal projects. Prices are only nominal and go toward supporting my hobby!
👋 Hi everyone! This thread is public, so let’s keep it nice and respectful. No ads, spam or nasty stuff!
🇺🇸 User's country: United States
🌐 Member’s preferred language: English. You can translate online via DeepL.
💡 Are you referring to a particular model? Add the link, title or model number.
🖼️ Want to post photos? Use a free host like ImgBB and paste the links in the message.
✍️ Writing Tips: Use the Markdown format to structure your text and make it more readable.
Write your message:
17 comments
what would you charge to print these?
- 0 likes
Hello! I just purchased your 1/35 scale wading stacks for the M4A2 and they definitely do not look like they are prescaled at 1/35. Can you assist me with this please? They are way larger than a 1/25 part I put in my slicer for comparison. Thank you
- 0 likes
Hello, I just checked the files and everything looks okay- the exhaust adapters should be 46mm in side-to-side width for reference. These things were massive in real life and take up a lot of the print bed :)
- 1 like
OK thanks, I will give them a go!
- 0 likes
i woould love for you to do:
1: correct hull ammo racks for m-18 hellcat
2. drivers compartment for tamiya m-18
3. engine compartment for m-18 ( tamiya)
- 0 likes
i woould love for you to do:
1: correct hull ammo racks for m-18 hellcat
2. drivers compartment for tamiya m-18
3. engine compartment for m-18 ( tamiya)
- 0 likes
does your .30 cal barrel come pre supported or do I have to add my own supports?
- 0 likes
https://cults3d.com/en/3d-model/various/1-35-27-gal-rubber-fuel-drums-stuart-staghound-pto-m4a3
Can this be made up to 1/16 Scale??
Regards René
- 0 likes
Yes! Scale it by 218.75% to make them 1/16. The details should still be acceptable for the larger scale.
- 0 likes
Can you upscale the model of LS-454U LOUDSPEAKER for a 4in speaker pod style. Also seperate the parts so I can send them to PCB Way to print them out for bluetooth project I'm doing. I have the measurements but I'm not good with CAD software. I'll of pay for your time.
- 0 likes
Great work on the M4A2 wading gear. I hope you'll do versions for the M4 and M4A4 as well in the future.
- 0 likes
They're in the works :)
- 1 like
Hi, I'm wondering on whether you'll be doing any more Titanic models in the future?
- 0 likes
Hi! Yes, I plan on doing more once I pick up working on my Titanic again. I plan on doing a majority of the furniture along with some minor accessories. Is there anything you’d like to see? I’m always open to suggestions.
- 1 like
Hi, thank you.
I’m actually interested in anything to add detail. I’ve been wanting make a model fully from 3D printed parts at 1/400 & 1/200 scale. If you ever happen to do every single part that would be required, would you consider some sort of bundle purchase for an entire parts kit?
Thanks for the models so far. I think my first purchase will be the Cargo Hatches in the coming days :)
- 0 likes
I purchased your US Interphone Box BC-606 1/35 SCALE FILE. The file was not downloaded, due to a noticed that said for me to contact you. Purchased order 75803602 dated 20023-12-30
- 0 likes
Hi! I don’t see anything wrong with the order from my end- can you send me an email using the email icon on my page? I’ll try sending you the files directly. Thank you!
- 0 likes
I PURCHASED THE 2ND CLASS SMOKING ROOM FURNATURE,DOWNLOADED THE FILES AND THE DESK WITH LAMP IS NOT IN THE FILE, I HAVE CHECKED IT TWICE. 9 FILES ARE INCLUDED, THERE IS AND EXTRA COUCH (REV) THATTAKES THE PLACE OF THE DESK WITH LAMP. CAN YOU PLEASE SEND ME THE FILE FOR THAT? THAT WOULD BE MUCH APPRECIATED.
THANKS , THE EMAIL IS Linnea.william.ireland@hotmail.com
YOU CAN CHECK MY PURCHACE ORDER TO VERIFY
- 0 likes
Hello, thanks for making me aware of this- I have added the missing file! Thank you and enjoy :)
- 0 likes
if i wanted to make a few 1/16 interphones what % do i scale it up to?
- 0 likes
218.75% :)
- 0 likes
MARMITE-KÜHLBOX IM VIETNAM-STIL 1/35 UND 1/16 ,could you do the inside of the containers with the three canisters in detail is separate it is possible for you ? give me a price I give you my email address domingosmanu@hotmail.com
- 0 likes
Thank you! If you have any problem or you think the design has flaws or can be improved please tell me.
- 1 like
Hey, thanks for downloading my designs. How’s it going with printing the helmets?
- 1 like
Sure thing man, you make some awesome stuff. I've got them on the printer now running at 8 s exposure. Will be done in a couple hours. I think you're probably right about 3s being too short of a time for a non mono screen
- 0 likes
Cheers, cheers. Hope they come out good!
- 1 like
No dice. Prints were way underexposed and had a few failures. Trying the opposite end of the spectrum now with a .02 running @ 11s. Doubt it’ll be any better but though maybe underexposure was my issue. After that I’m trying a .05 @ 8 as per Anycubic themselves. If that doesn’t work, I have a theory that it might be retract speed. Do you know what yours is running at? Mine is @ 3mm/s. Thought maybe if I drop that to something like 1 or 2 mm/s @ 8s exposure time it might work a bit better. If that fails, I’ve also got another resin I can try.
- 0 likes
Oh no! I don’t know, my retract speed is at 3mm/ second too. I really have no clue how to help further I’m afraid. They come out perfectly on my elegoo as you can see so I really don’t know. Did you drop the exposure by a lot? Maybe it was too low for a non mono? Maybe try it lower than normal but not as low as that failed one? Sorry to not be much help :(
- 1 like
0.03mm layer height,
4 bottom layers,
3.5s exposure time,
15s bottom exposure time,
8.5s light off delay,
4mm bottom lift distance,
4mm lift distance,
40mm/min bottom lift speed,
60mm/min lift speed,
180mm/min retract speed.
-Those are the settings I have down. Maybe try those but make the exposure time double mine so 7 seconds or like you’re saying 8?
- 0 likes
I might try that- I tried 8.75 s (my normal exp) and 8 s and the 8 s print failed. So maybe something in the middle would work better. I'll keep experimenting!
- 0 likes
Honestly no clue, I’m really sorry you’re having trouble printing them
- 1 like
Hehe no worries, not your fault mate. I'm sure I'll get my settings dialed in. And either way, still happy with my purchase- bare minimum I have some normal stalhelms that look fantastic :) Wanted to give you a heads up though, it would appear that your Large Crate STL's only have one of the ones in the picture- was that intentional?
- 0 likes
Completely intentional, both crates are in the same STL I just called the file 'type 2' while working on others. makes the upload smaller to have them on the same stl.
- 1 like
Oh I'm dumb- I hadn't even placed the STL yet lol. I just assumed it was only one of the crates. Nevermind! :)
- 0 likes
Hola, el Juego de radio US SCR-508 1/35 y 1/16 se puede imprimir a escala 1/6? Gracias
Hola, sí, creo que sí. Están sobredetallados en escala 1/35 y 1/16.