387 comments

bonjour ou puis-je trouver les cardans et moyeux pour ce buggy ?

Hello. I have the EL-39 nearly finished. I went to go put the flap servos in, and realized there are no cavities for the flap servos. I separated the wing01Flap files in Fusion, and the mesh does not have a cavity. Am I missing something? There really isn't anything I can do about it now, as the wing roots and spars are firmly glued to the fuselage. Just curious if there was an update to the files, or what I should do to go about putting the flap servos in. Contemplating cutting a hole into the lower skin just large enough to pass the servo body, and leaving the arm and upper servo exposed. It is all I can think to do without major surgery. thank for any input you have.

Hi i'm trying to install the Volvo C 30 plate but it doesn't seem to wanne fit in the car and, in fusion 360 it also looks like there is a gap between the plate and the little clip should i just move the clip so it locks with the plate?

Hey! For your Heinkel He-162, would I be able to sell a make of it? I’m not seeing anything against it in the policies, but I wanted to double check and I know a guy who would love this, uh so if you could get back to me that’d be great, thanks!

Hi! We want to lease some of your models. How can I contact you?

Hello.. I downloaded and paid for the R-2800 Pratt and Whitney file about 18 months ago, but can't seem to find the file. Is it possible for you to send this file again without me having to pay again. Regards Howard

Tahust, I looked at your He-162, and I'm wondering why the heck is it free? You could make a good profit from it because it's such an amazing model!
I hope you realize its worth eventually lol.

Hello, first of all thanks for very nice Hercules. Can you reccomend me airleon and elevator rates ? Thank you

Hey! For your https://cults3d.com/en/3d-model/various/1-32-scale-c-130-hercules-rc-model-for-vase-mode-printing, C130, should we use Lightweight PLA or does it not matter? I assumed it didn't matter because if not vase print then it adds a lot of weight.

on this: https://cults3d.com/en/3d-model/game/tray-for-playseat-challenge-which-uses-the-th8-mount for the mount you used the for the tray you used the TH8-playseat02-nuts.STL for the right side in the picture?

Hallo Kann man die He-162 A-2 auch als eine STL bekommen ? Komplet ?
Hello, can you get the He-162 A-2 as an STL? Complete?

Hallo Kann man die He-162 A-2 auch als eine STL bekommen ? Komplet ?
Hello, can you get the He-162 A-2 as an STL? Complete?

Hello, I have a question whether the Hercules and El-39 models can be printed on bambulab x1c 256mmx256mmx256mm?? Are there longer pieces?

Would you be willing to upload a model of your awesome GameMan to the Bambu Labs community?

hello good morning
I wanted to ask you what material you printed the housing and the he 162 impeller in
I would like to print them from the same material you printed....thanks

what MM fan goes in the 162 please

Hi, I have a jet model for a real aircraft that I am looking to get 3D printed. Would you be interested in doing this as a freelance project? Email is edboyle01@gmail.com. Thanks,

First! Thank you for this beautiful piece auf work! It is very nice. I Bought it today and I´am looking forward to the Projekt. you are writing about Factoryfiles in your description. in the downloaded Folder are only STL Files? Actual I´am using the Simplify 3D and the Creality Slicer on a CR 10S Pro V2.

what do you think of this test? with het 800-68-685 motor with internal resistance of 11.6 and two 5000 6s batteries? https://youtu.be/e3yoHYhim-s?si=Hnx3nri6-stCmD6z

Hi, I wanted to ask you if I can use the he 162 impellers on housing 5 and how much thrust do they give with the het 800-73-590 motor? have you tried them?... or maybe you can advise me which impeller I can use and which motor you recommend for a thrust of at least 4 kg

hi good morning I wanted to ask you if the propellers you made all turn in one direction (anti-clockwise CCW)....I wanted to ask you if when you want, you would also put the same propellers that turn opposite in the other direction (clockwise CW) I like it your work and I would like to print them and develop a project but I need to have the CW-CCW propellers I wouldn't want to change propellers and add others...sorry for this question...but would you help me in my project... ...I repeat I admire your work
hello, greetings

hi im building the c130 and cannot figure out if I should be printing the alignment dowels or source them from somewhere. can u help?

Hi! First of all, thanks for your contributions to RC community, awesome designs! I was wondering if its possible to share STEP (or any editable) files from VELTRO chassis, i read on reddit that supposedly you made some updates to project, if its possible to share it would be great!! (my e-mail: gabrielgbst@hotmail.com)

HI, is it possible to have the PIPER CUB 1/4 SCALE DUMMY ENGINE in 1/3 scale?

hi, i am printing your C-130 in a bigger scale, but i can print all files exept the Vstab01 becouse of the cirkels on it, i have scaled every part to 180%, could you please send me the Vstab01 without the cirkels please? my email is: joeri-dc@hotmail.com , many greetings from joeri