19 comments

The hose clips actually work for both the z-16 and z-20 heavy duty elite sliders, so it should fit your x50 just fine. I need to update my listing yet, but I've had people tell me I'm works (just let me know if you run into issues)

Tanks for your reply, if I have issues with fitment will you be able to modify your stl? Only asking bc I’ll be purchasing the file. Thanks.

Hey Brandon, I have the printed version listed on Etsy and also gave my cousin permission to list this design on Etsy, so I'd prefer you didn't sell there so we're not in direct competition. I would also say no if you're asking to sell the digital files (since that's where all my time was spent), but I assume you're talking about printed versions. However, if you want to sell the printed versions locally, on Facebook, or basically any marketplace other than Etsy, I'm cool with that. If Etsy was your main plan, let me know and I'll give it some more thought on how it can benefit both of us.

I sincerely appreciate you reaching out and asking permission rather than just doing it and hoping for the best; honest people like you seem to be rare nowadays

Jason

Thank you for permitting me to sell these locally and on Facebook, etc.

I do have an Etsy store, I've wouldn’t list them there without your permission. I'm open to discussing your thoughts on Etsy and potentially working out a fair arrangement for both of us. Feel free to reach out via email at bcc3dprinting@gmail.com if you prefer a more private conversation.

Appreciate it,
Brandon

No I realized you mentioned the M4x8 screws. I am a complete idot for not reading teh instructions carefully.

Lol, thank you Alex for the feedback and I'm sorry your ended up ruining your build plate. I did see that the description lists m4x8, but I used to have that listed in the readme file as well, but I must've accidentally overwrote it during my last update to the file. Thank you for the heads up, I will add that info back to the readme file.

Jason

Hello, I'm sorry you're having issues with this print. What do you mean by "messes up"? These are large pieces that utilize most of the print bed, so if you don't have your printer dialed in and getting a near perfect first layer, it's not going to be able to print without warping or breaking loose off the bed. I wouldn't typically like to give a refund on a digital file because people can just claim it didn't work out and still have the file (I'm not actually sure how refunds even work on Cults tbh because I haven't had to to it yet). The files themselves should be fine as I've sold hundreds of these between Cults and Etsy and only had two or three people who ran into issues, but were able to get resolved by getting a good first layer or a bit of filing/sanding of the finish product. Let me know what kind of issues you're running into and I'll try to assist best I can

Thank you,
Jason

Hey, I appreciate the feedback! I don't actually own the A250 so I am unable to verify myself, but it seems odd to me since I worked with someone who does have the A250 to design this and he was able to print and use it as is which is why I settled on this as the final design. If you happen to have the original rear piece printed, can you please send me a pic of it near/between the z-axis pillars so I can take a look? No big deal if you can't or already discarded the part. I'm wondering if Snapmaker has different iterations of the A250 between the kickstarter ones and the production run (I ran into small issues like this with my A350 design).

It doesn't look like you can send images here, so feel free to email me at jasonjohnson519@gmail.com

Hi Jim. What exactly are you looking for that isn't accomplished by my listing for the A350 adapters found here? https://cults3d.com/en/3d-model/various/snapmaker-2-0-a350-snap-in-quick-change-laser-bed-adapters

Hi there! So, I looked up the build volume of the Ender 3 Max and it says it's 300mm x 300mm. I put those dimensions into Simplify3d and added the part. It looks like it will just barely fit (screenshot: https://ibb.co/qNdfgwH) and be able to be printed, but it is very close to the edges

Thank you so much for checking. I might be able to get this to print on Snapmaker, and that's what I'll try first, but if it continues to give me fits I've got a backup plan. Really appreciate it!!

No problem! Good luck and happy printing!

Hello, I'm sorry you're having issues with your print. Firstly, I'd like to ensure we have our terminology correct: When you say it doesn't fit on the laser bed, are you referring to the laser plates holes not aligning to the part you printed to attach them or are you saying you can't get it to fit on the machine once assembled (because it goes onto the print bed without the magnetic surface, not the laser bed). The fit is designed to be tight and may require a bit of sanding/filing of the tabs depending on the accuracy of your printer. I have now sold over 100 of these files on etsy and only two people who were having issues and eventually realized one was user error/warping of the part and the other just needed some light sanding. So I know that the file is correct unless by some chance Snapmaker has changed any of their dimensions slightly. I apologize for the late response to this. Please let me know if you're still having issues