Hi! I'm Jack , i make cool models from popular games, check out my models!
Follow me to stay updated about my newest models.
Check out my instagram page
I wish you a nice day!
👋 Hi everyone! This thread is public, so let’s keep it nice and respectful. No ads, spam or nasty stuff!
🇦🇱 User's country: Albania
🌐 Member’s preferred language: English. You can translate online via DeepL.
💡 Are you referring to a particular model? Add the link, title or model number.
🖼️ Want to post photos? Use a free host like ImgBB and paste the links in the message.
✍️ Writing Tips: Use the Markdown format to structure your text and make it more readable.
Excuse me, Jack, if you don’t mind me asking, at what scale are your models? I’m trying to use them to make a holdovers 2 board game, but I’m looking through various model makers, and I’m trying to see which option would be best for said board game. Thanks!
Hi, the terminid Evo pack is 1:48, most of my other models have not a precise scale,since they were not meant as a board set.
However my "Mega Pack" bundles have the same scale in between each other, meaning once you find the right resize %, you can apply it to all of them.
Remember to double check anyway.
Have a nice day!
So to speak, all of your large packs, like the automaton and terminid evo packs are 1:48?
No, only the Terminid EVO has a 1:48 scale, all other have a not specific scale, but they have the same proportion within each other (except the helldiver pack).
Automaton, terminid classic, and illuminate packs have the same proportion, different from Terminid EVO.
I Suggest you to use blender, you import the models, rescale them and establish the right proportions, in case you can not, i can do it for you! let me know.
Gotcha gotcha… thanks a lot for your help! Last question…
I understand it’s meant for resin, or atleast for best quality, but can it be used on a printer such as the Bambu A1?
Last question for ya!
I understand it’s made for resin prints, and I’ll scale them accordingly once I get the files in orcaslicer for example.
But, can said files be used on, for example, my Bambu A1?
Of course they can!
They are stated as for resin printer because when you hollow them, they will not have complex internal geometry that will cause liquid resin to be stuck inside the model.
In case of any other question, i am here to answer, no problem!
Hello Jack, i have a question about the 3d model "old guard helldivers 2"; the model itself is "empty" inside or not? I'm asking due to the fact that if the model is "full" i have issue while 3d-printing it
Hi! all 3D models in general are full, you have to empty them through the slicer.
If you use chitubox it's really easy,you can even choose thickness.
After hollowing the models you will have a sigle empty space inside the model! make some drainage holes through the slicer, and you will be ready to generate supports and print.
Hello Jack, I may have missed it, but do you have All-model faction packs, or an all Helldivers model collection pack at a discount to make it a bit easier to to purchase the full helldivers collection?
Hi!
I do not have an all-faction pack, but i have an Helldivers figure one, made of 6 figures.
You can find it on my profile, check out the various collections .
https://cults3d.com/en/design-collections/JACK-3D/super-earth
Hello, total noob here.
I ordered this Automaton set here in Cults3D. I downloaded the files on my iphone. I have now switched over to my Windows machine, logged into cults3D and I see the download but it seems like i need to pay again. Am I missing something?
No, you should not , did you log with the same account?
Check in you "downloads" area. You click on your profile icon in the upper right corner, then click "downloads".
The terminids evo pack is awesome! But I have a question. There's a Rupture Strain. Will there be a Spore Burst Strain? And there will also be Crescent Overseer and Leviathan for illuminate?
Hi,Thank you!
i already made the rupture strain terminids, i will work on spore burst strain and the other illuminate soon.
Will you be doing a Black Friday sale?
Hi, i might do it for some models.
Were you interested in some specific ones?
The Automaton, Illuminate and Terminid Classic bundles (+hive lord + dragon roach)
How about Cyber Monday? :D
Purchased and shared the link with others who might be interested in buying. Thank you!
Thank you very much!
Any chance you can do tentacle options for the Impaler?
just tentacles? What do you mean?
the 3 tentacles it deploys when it buries it's head underground:
https://youtu.be/kImcGwBwgOc?si=A8f83RpYRE1QtPGS&t=464
i can make them as a separate model with his own base.
With the tentacles coming out the ground.
Is that what you want?
Hey Jack, I was wondering what the size specifications for the terminids are. Are you referring to their base size in the description?
Hi, the size is referring to their height
bonjour le Porunga - ポルンガ et t'il coloré svp ?
Salut ! Comme indiqué dans la description, traduit en français :
« Avertissement : Aucune texture ni partie peinte n'est incluse dans les fichiers. La coloration est fournie à titre indicatif et de référence pour la peinture. Ceci est un modèle 3D pour imprimante 3D. »
i love your models is there any chance that you are going to make more super earth models that point their weapons? like the eat and flame thrower guys?
i love your models is there any chance that you are going to make more super earth models that point their weapons? like the eat and flame thrower guys?
Thank you!
Sure, i was already thinking about it, but i had some personal problems recently.
I will be working on new super earth models soon, stay tuned.
we need Dragonroach
The Hive lord will soon be release, like tomorrow, Dragonroach will be next!
Hi! I released the Dragonroach
yeah！
I think you make really cool stuff but you seem to be lacking in the super earth department. I was thinking you could make a couple helldivers in b-01 tactical armor pointing the liberator in-front of them aiming it at something. And maybe you could make a FRV, both mechs, pelican one, eagle one, a super destroyer, and maybe the leaked ATP. I was thinking you could put this all in a mega pack like your other 3d prints.
Hey man really cool models but I don't know if its possible. I was wondering if there's anyway to get a spore spewer, shirker nest and hive lord model. I don't know if you could do it or that would be impossible but if you could that would be cool and i would 100% add that to my list of things to buy.
Hi, thank you!
I'm working on the Hive lord, i will see what i can do for the others.
But i do not have much time at the moment.
you're all good i will gladly wait. thanks for replying and i will be happy to see how your work turns out
Hi, the hive lord will be soon released, in the next 12h
These models are rendering in as low poly models lacking much of the details in your previews. Is this something from the download?
Hi Sir!
As the description says:
"-The divisions of the models are the ones seen in the last images and in some gif.
_
In case of any problem with the models ,contact me, i'll solve the problem as soon as possible.
_
Disclaimer the seen coloration has to be intended as a reference for painting. No texture or painted parts are included in the files,3d models may be slightly different from the animated gif."
Some of the details you are referring to, are part of the texture.
But I assure you that after printing and painting, they will look better that in the slicer
I was planning to remake the models ,like I did with the Terminids, but I started some new projects.
That may be true for fdm printing but resin prints show every polygon.
Btw just few models have this issue, most models are detailed
Hi there! I am interested in buying your Doom The Dark Ages Slayer helmet model for cosplay intentions. I have some doubts tho, given it´s only three parts. The spikes on top wouldn´t be in a bit of a risk considering that upper part is all just one part? Or there shouldn´t be any problems with the spikes when printing on PLA? Also, are all of the details there? I´ve compared to the in-game model and some small circles are missing on the front part, so I don´t know if those are supposed to be there, or just painted.
Will be waiting for your response, thanks either way!
Hi!
-in case you prefer it, in the files, there is a whole helmet as well.
-Spikes should not be a problem as long as you pre-support them well.
-All the details you see in the painted images are a texture, a reference for painting, if you look at last images there is an untextured model render, that's the exact model you will be printing.
-The small circles you are talking about are not engraved in the model, since they are really small, and should be achieved by hand or painting the model.
It's obvious that the model requires some post printing work, you can give it way more details and attentions than your printer could ever do.
Dear [Jack - 3D],
I hope this message finds you well. I recently came across your STL model "[Sun Wukong - 孙悟空 - 孫悟空 - black myth wukong]" and was truly impressed by your work.
I would like to kindly ask your permission to 3D print and sell physical versions of this model. I will, of course, fully credit you as the original creator and follow any licensing terms you require.
Please let me know if you offer a commercial license, or if there’s any fee I should pay for this permission.
Thank you very much for your time and consideration. I look forward to hearing from you.
Best regards,
[HARRY ISTIYA / HARRYFAB]
Hi!
Thank you for the consideration, if you want i can sell you a license of this type:
"CULTS CU-ND - Commercial Use - No Derivative
You are authorized to:
Print — copy and distribute 3D prints of the 3D model for any use, including commercial, in unlimited quantities.
What is not allowed:
No sharing of your 3D prints of the 3D model without attribution;
No modification or adaptation of the 3D model;
No distribution or resale of 3D digital files of the 3D model."
I will create a separate link where you can buy this model with this license, it will obviously have a higher prince than the normal one.
Let me know if it is ok for you.
Hi!
Thank you very much for your quick response and for offering the license option.
Yes, the CULTS CU-ND – Commercial Use – No Derivative license sounds good and clear to me. I understand the terms:
✅ I am allowed to 3D print and sell the physical prints in unlimited quantities.
❌ I will not share, modify, or resell the digital STL file, and I will always give proper attribution.
Please go ahead and create the separate purchase link — I’m ready to proceed with the payment once it’s available.
Thanks again for your support and looking forward to working with your design!
Best regards,
[HARRYISTIYA / HARRYFAB - ULTRACRAFT 3D]
Here is the link!
https://cults3d.com/en/3d-model/art/sun-wukong-cloud-riding-ce9303cf6c97f0c6c735
Let me know where you are going to sell it, just out of curiosity.
For any further discussion comment under that model link.
Hi!
Thank you for your message.
At this time, I have not sold or distributed any prints of this model yet. I downloaded it for archival and planning purposes only, and I fully respect the license terms.
If I ever decide to sell the physical 3D print of this model in the future, I will make sure to comment here and follow all license conditions, as requested.
My brand is called HARRYFAB – UltraCraft 3D, and I’m currently preparing everything carefully before launching.
Thanks again and I’ll be sure to keep communication transparent here when the time comes.
Ok, in case , the link will be available here.
I will be waiting for an update, have a nice day!
Thank again for your consideration, in case you will be interested in other models let me know.
Hello. How are you? I don't own a printer. Will you print, paint, and sell a Revenant? I really want 1 badly. Please email me at Stefanlovesdbz@gmail.com
Hi Sir, no i do not offer this service at the moment.
You should search for a local, and make him do the job.
Remember that most of the models you buy on this site are exclusively for personal use, unless the license says otherwise.
Have a nice day!
Hello. How are you? I don't own a printer. Will you print, paint, and sell a Revenant? I really want 1 badly. Please email me at Stefanlovesdbz@gmail.com
Would it be possible to thicken the interior of the dark ages slayer helmet? I have it printed out in multiple pieces but it's very thin and it's a pain to sand and glue
hi, just bought your DOOM dark ages titan and its incredible! will you be doing unarmoured and cyclops titans?
Hi,thank you!
Yes,i will! i'm already working on the Cyclops.
i already made an Atlan Mech model if you are interested.
https://cults3d.com/en/3d-model/art/atlan-mech-titan-doom-the-dark-ages
sweet! I've been looking through your helldivers stuff, do you plan to do all the doom demons like that?
For sure , i will make most of the main demons.
I'm already planning on making the Revenant and the Slayer's Dragon.
excellent, Ive built a large warhammer army of the demons from all of the previous games, you're making it a hell of a lot easier to update, thanks!
anything that is not on your list?
None in particular at the moment, i will make most of them, if i see interest i will make all of them.
Do you prefer the models divided in parts or all in one piece?
i'm talking about the smaller ones.
for smaller stuff definitely one piece, unless there's weapon options like the arachnatron
if you keep making them Ill keep buying them :) dark ages has a LOT of great designs
Do any preferences on the one you would like to see next?
Top two would be the arachnotron and imp stalker
Would any armoured variants be separate releases? (Not related to my answer)
Alright!
They will probably be included but i have to decide yet.
Could I make a request for the pinky? Could you have the option for no rider please?
The Imp stalker is coming,give me a few days and you will have the pinky as well.
No rush :) take your time
Imp Stalker has just been released. in 2 versions.
https://cults3d.com/en/3d-model/game/taunting-imp-stalker-doom-the-dark-ages
https://cults3d.com/en/3d-model/game/attacking-imp-stalker-doom-the-dark-ages
Hi, unfortunately you will have to wait one more week for other models. I have an exam in the upcoming week and i have no time for 3d modeling.
Hope you will understand, have a nice day!
absolutely fine, like i said no rush. good luck!
Hi, I'm back !
At the moment I'm working on both the pinky and the revenant.
Stay tuned for release!
Hi! I recently purchased your Bayle the Dread model, but unfortunately the files didn't work with the app my associate uses with her 3d printer. She doesn't plan on switching apps anytime soon, so is it possible to get a refund?
Hi! What app is your associate using? And what do you mean saying they didn't work?
30 people downloaded that model, none complained about it, the files are functional.
She said the app that came with her printer is called Makerworld. The files were apparently just not compatible with the printer, but I don't doubt they'd work elsewhere. Maybe because it's a filament printer? But I didn't think twice about that when buying them, and she says I should've showed her first. Which is fair. I was just thinking of sanding Bayle down if he came out janky.
As you will understand i can not refund you, since the problem is on your side and not with the model itself.
This model can be perfectly printed on FDM (filament) printer, as you can see in the shown pictures, she should use a better slicer program like "Cura".
The files are ".stl", a standard format for 3d models.
Tell her that the files have to be pre-supported and sliced via the program.
I understand. I will try.
The new bug models are cool and look great with the armor texture. very life-like. But, I was hoping to get the OG game designs you had up prior. is it still possible to get those files or are they available on another site you may have?
https://cults3d.com/en/3d-model/art/mega-pack-terminids-helldivers-2-8719c6d1d2f676359b2b
I remade those models also to improve their quality.
Out of curiosity,is it a matter of aesthetic or price?
Just a matter of aesthetics. Again, I mean no disrespect.
I made the old pack public again
the other link does not work anymore
This will:
https://cults3d.com/en/3d-model/art/mega-pack-terminids-helldivers-2
So, i uploaded the HQ version of all the models , and added Impaler and Brood Commander.
Therefore the classic pack is now high quality as well.
Still no base is included for the models.
Awesome, you're the GOAT! Lol I'll have to snag it after work. Appreciate ya.
just purchased the classic pack and noticed the Impaler, bile spewer and alpha brood commander all have cavities. do you have a recommended way to fill them to make the models solid?
I did not notice, i already fixed and uploaded the models, you can download them.
Have a nice day!
Hello!
I am currently working on rulesets for a custom tabletop version of HD2 in the essence of warhammer. May I direct readers to your page for models?
Hi, Sure!
Keep in mind that my models are for Licensed for "private use" therefore,if someone want them they have to buy the model first.
No mass production is authorized.
yeah no, im just directing people to you
Then you can for sure. Thank you!
do you plan on making more helldivers, illuminate (once they come out), and bases for terminids and automatons? cause if you do you got my money
Hi,i will!
At the moment i'm working on a figure from the latest warbond.
Ah and by the way,i received via email the other message,but i cannot see it here.
The automatons and terminids megapack do not come with bases,but i'm planning on improving those packs.
Therefore i may add them in the near future.
yeah i deleted the other message after looking at the files. any idea on when that improvement could come? lookin for an alternative to $333 hd2 boardgame bullshit
Today i will release a new figure,in the next days i will be working on the terminids then on the automatons.
I will also re-scale them.
Hi,i wanted to let you know that i'm halfway through the remake of the Terminid pack.
I plan on releasing it at the starting of the next week.
All models are totally new and different from the onese in my actual pack, they all are brand new design, a bit different from the ones in the game.
They will all have a base and the scale of the boardgame.
thats great! thank you!
Both the Mega Pack and all models have just been released, hope you will like them!
Hi, im printing your terminid mega pack and ive noticed the hunter file is actually a pouncer (a scavanger varient) what i do like the secret inclusion of that it isnt in the images but i would also like to print the hunter model too. if it isnt any trouble could you re add the hunter if its possible. sorry to be a pain, thank you <3.
Hi, thank for you purchase!
You are not a pain, i have never noticed that mistake, thank you for informing me!
The hunter has already been uploaded, you can redownload the files now, you can see hunter's render in the last image.
Sorry for the inconvenience.
Have a nice day!