On your VS4-10 Cantilever Rear Suspension Kit. What is the hole spacing on the mount portion? Would like to run it on aSCX10-2 carbon fiber frame rails. Thank you in advance.
- 0 likes
👋 Hi everyone! This thread is public, so let’s keep it nice and respectful. No ads, spam or nasty stuff!
🇨🇦 User's country: Canada
🌐 Member’s preferred language: English. You can translate online via DeepL.
💡 Are you referring to a particular model? Add the link, title or model number.
🖼️ Want to post photos? Use a free host like ImgBB and paste the links in the message.
✍️ Writing Tips: Use the Markdown format to structure your text and make it more readable.
Write your message:
27 comments
It has 12mm hole spacing on frame mounting bracket; but beware it also "cups" around the VS410 frame; if your carbon fibre frame is more than ~11mm (11.4mm) tall you would have issues though.
- 0 likes
Hello. Is it possible to use the vfd when doing the fis conversion?
- 0 likes
No unfortunately; currently requires a transmission swap. This is something I will try revisiting in the future though.
- 0 likes
Do u have a file for the link jig in the picture with the h10 ifs2 conversion?
- 0 likes
That is actually a free community design by Kent! You can grab it here:
https://makerworld.com/en/models/878228-rc-link-measuring-tool#profileId-831752
- 0 likes
link doesn't work and i dont see it when searching
- 0 likes
im an idiot and didnt read, i got it. Thanks
- 1 like
Hi, can I buy the Poizd T3V2 side skirts only?
- 0 likes
Ask and you shall receive!
If you need any variants (wider/taller) feel free to reach out.
https://cults3d.com/en/3d-model/game/poizd-t3v2-side-skirts-sliders-hookerdesigns
- 0 likes
Thanks for fast response. Can I have info on the bolt spacing? Is it 38mm? Also can I request the side skirts to be flat like the blue one in the photo (not angled). The STL file one looks angled. Thanks.
- 0 likes
The M3 hole spacing in the frame is 27mm Centre to Centre. The Poizd T3V1 may differ; I am unsure but this is same as the stock skid/skirts. Unsure where the 38mm you mentioned comes from.
Sorry the photo must just be at bad angle but they're all very angled with sporty setup; similar to the stock ones. I can throw on some flatter/low rise ones but typically you want these angled or they just become snag points on the rocks.
- 0 likes
Hi, I'm actually gonna use these sliders for my custom chassis (not Poizd). 38mm is Axial SCX10 series standard skidplate hole spacing. Could I request 38mm hole spacing and totally flat (aligned/parallel with hole pattern)?
- 0 likes
Sorry this isn't flat on the bottom; theres no way I can easily modify it to suit 38mm you're asking. Best of luck!
- 0 likes
Hey thanks for fast reply, oh ok good to know, yes my second with them,...have a great week
- 1 like
Hi again 1 year later, hahaha, about this print 1101806 Traxxas Traxx hub, in the photos you have the blue hub that is completely open. How did you do it, or did you cut them out? Thank you !!!
- 0 likes
That was an earlier prototype but the tracks didn't stay on as well. The ones you printed are the newer ones that work amazing, been running 3 seasons now and have sold many printer sets. Good luck!
- 0 likes
Hey, I have bought several of your designs after seeing you post them in one of the crawler groups on Facebook. I love the new low profile ESC mount for the optic, I am going to mount my esc box there, which made me think. Is there any way you might make one with an integrated waterproof receiver box?
- 0 likes
I was actually considering this myself but haven't had the time to proper dedicate to this; knowing others are interested I will try to move it up the priority list!
- 0 likes
Just purchased, but the download is not working. Need help getting the download so I can send the file to someone to print it for me…
- 0 likes
I reuploaded the file with a shorter file name; I think this was causing some people on phones issues. Can you try again now? You need the "Traxx_Hub_v2.stl" file.
If you have issues please reach out to moe282@gmail.com and I will send a private link.
- 0 likes
Got it to work. Thanks!
- 0 likes
Hello just downloaded the FMS FCX24 +20mm Rear Trailing Arm Set (Lower, Upper, Driveshaft Adapter), but the file for the driveshaft adapter didn't come through. Both the arms worked fine.
- 0 likes
Never mind i just found it. Thanks.
- 0 likes
I reuploaded with a shorter file name so it wasn't so hard to find and see on some devices. Glad you resolved!
- 0 likes
Hi! I have added the +35mm extended trailing arms to my fcx24 power wagon, love the look of the bed and low headache rack, but would like to have it without the radiator and battery, do you offer that? Thanks!
- 0 likes
The latest updates do actually include raw bed variant without holes for battery or radiator as well.
- 0 likes
Got any more Poizd files?
- 0 likes
https://cults3d.com/en/design-collections/HookerDesigns/poizd-t3v2-killmode
Let me know if there is something else you're looking for. I had some body mounts I could also toss up.
- 0 likes
I grabbed everything you have except the servo mount. Body mounts would be cool, front & rear?
- 0 likes
hey my inventor i have to renew and its not working and i need to design a twin micro servo mount for the vfd twin like you did the h10 optic but for the vs410 phoenix, i was wondering if you could design me one and i can trade u my 3d printible driveshaft spline files they are really strong and exocaged rc did a review, thanks for reading and ill be waiting to hear back from you
- 0 likes
I really appreciate the offer but currently am backlogged quite a bit on projects and unable to take on anything new unfortunately. There is already a decent OD micro servo mount on cults; its too bad nobody has done a dig mount yet but maybe in the future.
- 0 likes
yo buddy, I was meaning to ask when we chatted on the vanquish forum on FB. But have you thought of making a plate where the micro servos lay on their side? gives way more room for wiring and a better horn angles for other mirco servo brands like NSDRC and such. Still works great the way it is, and prints super nice!!
- 0 likes
Appreciate the feedback and kind words. Still on the distant list but the project list is just a bit backlogged at the moment as work/life have also gotten busy. Sorry I can't offer up sooner or get onto this!
- 0 likes
Ist das für den 1:18er Modell
- 0 likes
Hi,
Just wanted to say a quick thank you for developing your parts and making the files purchasable.
I bought the injora bumper mount and bed, including radiator and battery, for my power wagon and they are great.
- 0 likes
Wow thank you for the generous and very positive complement; I really appreciate it.
Motivating creators like myself definitely benefits us all by encouraging more new releases and keeping the stoke high for all.
Thank you kindly for your support!
- 0 likes
Hello again, I wrote about 4 months ago, I was wondering what material is good for print PLA PLA+ ??? Thank you !!
- 0 likes
I'm sorry these questions just come to my main account but don't tell me what product you were looking at, sorry about that!
Most my files are best printed from PLA+, I generally suggest 60-100% infill additionally except on things like the Capra interior.
- 1 like
Sorry I forgot to mention it was for this item Traxx drive wheel hub, thank you !!
- 0 likes
Hey wondering if you make those gears for traxxas traxx I would love to purchase a set
- 0 likes
Sorry i only sell files on this page but if you contact me via email at moe282@gmail.com I'd be glad to help set you up with someone.
- 0 likes
i just tried again my friend still no luck can u email it to me ?
- 0 likes
All fixed now; Sorry for the delay.
If you have any issues please email moe282@gmail.com for direct link; this thread is public so I can't post links here.
- 1 like
hello my friend im trying to download the fcx24 version but it says the zip folder name is to big cant complete can u help me id really like to use this for a christmas build please help
- 0 likes
Sorry I was away for the weekend! I haven't had an issue myself or from others but I did rename and shorten up the files within the ZIP so it should be under all file limits; please download and try again!
- 0 likes
gosh thank u ill try now
- 0 likes
I tried to download and said...windows cannot complete the extraction. The destination path is too long. Rename the compressed (zipped) folder and try again. Please help
- 0 likes
Is there anything u can do or should I apply for a refund?
- 0 likes
Cults has been fixed, sorry for the issue. If you still struggle please email moe282@gmail.com for direct link; this thread is public I can't post here.
- 0 likes
I recently just bought the file it won't let me download and says this ..windows cannot complete extraction. The destination path is too long. Rename the compressed (zipped) folder and try again.
- 0 likes
Hey, quick question. Will this model work on an SCX-24?
- 0 likes
No sorry!
- 0 likes
Good morning, quick question. About the TRAXX DRIVE WHEEL HUB, which material did you use to print it, my friend will do it for me? Thank you !!
- 0 likes
Thank you for purchasing my cults3D H10 design. I'm giving you a 20% discount code to purchase the YumiKe panel for the H10. : YUMIKE20C Valid for 7 days.
https://cults3d.com/:3234935